References
- J. W. Baughn and X. Yan, 'Liquid Crystal Methods in Experimental Heat Transfer,' Proceedings, 32nd Heat Transfer and Fluid Mechanics Institute, pp.15-40, 1991
- J. C. Han, Y. M. Zhang and C. P. Lee, 'Augmented Heat Transfer in Square Channels with Parallel, Crossed, and V-Shaped Angled Ribs,' ASME Transactions, Vol.113, pp.590-596, 1991
- T. S. Ravigururajan and A. E. Bergles, 'General Correlations for Pressure Drop and Heat Transfer for Single Phase Turbulent Flow in Internal Ribbed Tubes,' Augmentation of Heat Transfer in Energy Systems. ASME HTD, Vol.52, pp.9-20, 1985
- J. Yampolsky, P. A. Libby, B. E. Launder and J. C. LaRue, 'Fluid Mechanics and Heat Transfer in Spirally Fluted Tubing,' General Atomic Technology Report, GA-A17833, 1984
- C. J. Craft, B. E. Launder and M. A. Leschziner, 'On the Prediction of Turbulent Flow in Sprally Fluted Tubes,' Fifth IAHR Conference on Refined-Flow Modelling and Turbulence Measurements, Paris, 1993
- J. R. Barber, 'Thermoelastic Instabilities in the Sliding of Conforming Solids,' Proc. Roy. Soc. Series A312. pp.381-394, 1989
- K. Lee and J. R. Barber, 'Frictionally Excited Thermoelastic Instability in Automotive Disk Brakes,' ASME Journal of Tribology, Vol.115, pp.607-614, 1993 https://doi.org/10.1115/1.2921683
- D. L. Hartsock and J. W. Fash, 'Effect of Pad/caliper Stiffness, Pad Thickness, and Pad Length on Thermoelastic Instability in Disc Brake,' ASME Journal of Tribology, Vol.122, pp.511- 518, 2000 https://doi.org/10.1115/1.555394
- A. Floquet and M. C. Dubourg, 'Realistic Braking Operation Simulation of Ventilated Disk Brakes,' ASME Journal of Tribology, Vol.118, pp.466-472, 1996 https://doi.org/10.1115/1.2831559
- A. Floquet and M. C. Dubourg, 'Nonaxisymmetric Effects for Three Dimensional Analysis of Brake,' ASME Journal of Tribology, Vol.116, pp.401-408, 1994 https://doi.org/10.1115/1.2928852
- D. H. Lee, Y. S. Chung and D. S. Kim, 'Turbulent Flow and Heat Transfer Measurement on a Curved Surface with a Fully Developed Round Impinging Jet,' International Journal of Heat and Fluid Flow, Vol.18, pp.160-169, 1997 https://doi.org/10.1016/S0142-727X(96)00136-1
- J. W. Baughn and X. Yan, 'Liquid Crystal Methods in Experiemental Heat Transfer,' Proceedings, 32nd Heat Transfer and Fluid Mechanics Institute, pp.15-40, 1991
- S. K. Lee, B. Y. Sung and S. K. Ha, 'Optimal Design of Ventilated Disc Brake Rotor,' Transaction of KSME(A), Vol.24, No.3, pp.593-602, 2000
- R. Limpert, Brake Design and Safety, SAE, Warrendale, pp.111-143, 1992
- S. W. Gang, C. J. Kim, D. H. Lee and H. S. Kim, 'The Thermal Analysis of Brake Disc using the Solid Model and 2D Coupled Model,' Transactions of KSAE, Vol.17, No.7, pp.93-100, 2003
- J. H. Choi, D. H. Kim, I. Lee, H. B. Cha and C. M. Kang, 'Transient Thermoelastic Analysis of Disk Brakes Using Finite Element Method,' Transactions of KSAE, Vol.10, No.5, pp.160- 167, 2002