반도체공장 Clean Room에 대한 화재요인 분석 및 성능위주 화재안전설계(1)

Fire Hazard Analysis and Performance Based Fire safety Design for the Clean Room in Semiconductor factory(1)

  • 한수진 (명지대학교 산업공학과) ;
  • 강경식 (명지대학교 산업시스템공학부)
  • 발행 : 2006.10.30

초록

This research analyzes clean room major fire prevention standard of clean Room(FM, IRI, and NFPA Code), the structure of Performance-Based Fire Safety Design(PBD) applied the korean fire industry situation. Performance-Based Fire Safety can operate effectively the performance of fire protection equipment & building design, so the fitness of fire safety system can be embodied by operating this. moreover, cost to be consume fire safety of real building can reduce and Performance-Based Fire Safety is considered to important technique in fire protection field. A fire in a clean room may cause a serious loss by spreading smoke particles. We will be investigated by using a computational fluid dynamics, for loss prevention by smoke spreading from one fire area to another for clean room and compared the Performance-Based Fire Safety Design with the prescriptive code design. The methodology of fire safety performance-based fire safety design and guarantee of many kinds design skill of fire system and developing design procedure will be very serious one in order to improve efficiency of domestic system. Therefore, This research will be contributing to secure safety of clean room and to set up the performance-based fire safety design in Korea by regulation for the performance-based fire safety design effectively.

키워드

참고문헌

  1. 송윤석, 윤명오, 현성호, 이창우, 윤여송, 김성민, ' Clean Room 위험성 평가에 따른 안정성 확보에 관한 연구', 한국소방학회지, Vol18.No.4,pp78-85
  2. SFPE, 'SFPE Engineering Guide to Perfonnance-Based Fire Protection Analysis and Design of Building', SFPE, 2000
  3. 이경구, '건물화재안전에 관한 성능설계법 소개', 2006년도 하계세미나 발표집, 한국화재소방학회,2006
  4. NFPA, NFPA 318 Standard for Protection of Clean rooms, National Fire Protection Association(2000)
  5. FM, Factoty Mutual Property Loss Prevention Data Sheets 1-56, Clean Rooms(2001)
  6. FM, Factoty Mutual Property Loss Prevention Data Sheets 7-7/17-12, Semiconductor Fabrication Facilities(2001)
  7. IR!, Industrial Risk Insurers IM. 17.1.1 Guiding Principles for the Protection of Semiconductor Manufacturing Facilities(1991)
  8. IRI, Industrial Risk Insurers IM.17.11 Cleanroom(l990)
  9. NFPA, NFPA 92B Guide for Smoke Management Systems in Malls, Atria and Large Areas - Appen-dix C t-Squared Fires, National Fire Protection Assocoation(2000)
  10. 김원국, Room Fire Modeling for performance based Fire protection Design(1999)
  11. 박외철, '청정실 화재의 시뮬레이션' 한국화재소방학회지, Vol19, No.2.pp200-205
  12. 김운형, Michal J.Ferreira, 안병국, '반도체 공장의 제연설계', 한국화재소방학회, Vol.14. No.4, pp23-28
  13. 민동호, 손봉세, '반도체 공장의 청정실 화재확산현상에 대한 수치해석적 연구', 한국화재소방학회 추계학술논문발표회, pp23-29
  14. 박외철, '청정실의 연기확산과 방연커튼의 효과', 한국화재소방학회 추계학술논문발표회, pp200-205