References
- A. Inoue: 'Bulk amorphous alloys', Trans Tech Publications Ltd
- Y. Kawamura, M. Takagi, M. Akai and T. Imura: 'A newly developed warm extrusion technique for compacting amorphous alloy powders', Mater. Sci. Eng., 98 (1988) 449 https://doi.org/10.1016/0025-5416(88)90204-2
- A. Inoue and T. Masumoto: 'Mg-based amorphous alloys', Mater. Sci. Eng., A 173 (1993) 1
-
T.R. Chueva, N.P. Dyakonova, V.V. Molokanov and T.A. Sviridova: 'Bulk amorphous alloy
$Fe_{72}Al_5Ca_2C_6B_4P_{10}Si_1$ produced by mechanical alloying', J. Alloys. Compd., (article in press) -
T. Harada, T. Kuji, K. Fukuoka and Y. Syono: 'Production of amorphous bulk materials of an
$Nd_{15}Fe_{77}B_8$ magnetic alloy and their magnetic properties', J. Alloys. Compd., 191 (1993) 255 https://doi.org/10.1016/0925-8388(93)90074-W - Y.J. Kim, B.K. Kim and J.C. Kim: 'Synthesis and densification of Cu-coated Ni-based amorphous composite powders', Mater. Sci. Eng., A (article in press)
-
D. Oleszak, D. Kolesnikov and T. Kulik: '
$Ni_{59}Zr_{20}Ti_{16}Si_5$ bulk amorphous alloy obtained by mechanical alloying and powder consolidation', Mater. Sci. Eng., A (article in press) - S.H. Yoon, H.J. Kim and C.H. Lee: 'Deposition behavior of bulk amorphous NiTiZrSiSn according to the kinetic and thermal energy levels in the kinetic spraying process', Surf. Coat. Technol., 200 (2006) 6022 https://doi.org/10.1016/j.surfcoat.2005.09.022
- S.H. Yoon, C.H. Lee and H.S. Choi: 'Evaluation of the effects of the crystallinity of kinetically sprayed Ni-Ti-Zr-Si-Sn bulk metallic glass on the scratch response', Mater. Sci. Eng., A (article in press)
- S.H. Yoon, C.H. Lee, H.S. Choi and H.H. Jo: 'Kinetic spraying deposition behavior of bulk amorphous NiTiZrSiSn feedstock', Mater. Sci. Eng., A 45 (2006) 45-52
- A. Inoue and H. Kimura: 'Fabrications and mechanical properties of bulk amorphous, nanocrystalline, nanoquasicrystallin alloys in aluminum-based system', J. Light Metals, 1 (2001) 31 https://doi.org/10.1016/S1471-5317(00)00004-3
- A. Inoue and T. Masumoto: 'Production and properties of light-metal-based amorphous alloys', Mater. Sci. Eng., 133 (1991) 6 https://doi.org/10.1016/0921-5093(91)90004-7
-
C. Zhenhua, J. Xiangyang, W. Yun and Z. Duosan: 'Preparation of rapidly solidified amorphous
$Al_{85}Ni_5Y_{10}$ powder and alloy', Journal of the Less Common Metals, 171 (1991) 187 https://doi.org/10.1016/0022-5088(91)90142-Q - M. Stoica, S. Roth, J. Eckert, L. Schultz and M.D. Baro:'Bulk amorphous FeCrMoGaPCB: Preparation and magnetic properties', Journal of Magnetism and Magnetic Materials, 209-291 (2005) 1480
- H. Kato, Y. Kawamura, A. Inoue and T. Masumoto: 'Bulk glassy Zr-based alloys prepared by consolidation of glassy alloy powders in supercooled liquid region', Mater. Sci. Eng., A 226-228 (1997) 458 https://doi.org/10.1016/S0921-5093(96)10664-X
- Y. Kawamura, M. takagi, M. Senoo and T. Imura:'Preparation of bulk amorphous alloys by high temperature sintering under a high pressure', Mater. Sci. Eng., 98 (1988) 415 https://doi.org/10.1016/0025-5416(88)90197-8
- 배정찬, 권혁천, 김휘준, 이진규, 김택수: '고성형성 중간재 제조기술 개발', 차세대신기술개발사업1단계보고서, (2005) 12
- M.H. Lee, D.H. Bae, W.T. Kim, D.H. Kim, E. Rozhkova, P.B. Wheelock and D.J. Sordelet: 'Synthesis of Nibased bulk amorphous alloys by warm extrusion of amorphous powders', J. Non-Cryst. Solids, 315 (2003) 89 https://doi.org/10.1016/S0022-3093(02)01424-2
- H.J. Kim, J.K. Lee, S.Y. Shin. H.G. Jeong, D.H. Kim and J.C. Bae: 'Cu-based bulk amorphous alloys prepared by consolidation of amorphous powders in the supercooled liquid region', Intermetallics, 12 (2004) 1109 https://doi.org/10.1016/j.intermet.2004.04.016
- C.K. Kim, H.S. Lee, S.Y. Shin, J.C. Lee, D.Y. Kim and S.H. Lee: 'Microstructure and mechanical properties of Cu-based bulk amorphous alloy billets fabricated by spark plasma sintering', Mater. Sci. Eng., A 406 (2006) 293
- T.S. Kim, J.K. Lee, H.J. Kim and J.C. Bae: 'Consolidation of Cu54Ni6Zr22Ti18 bulk amorphous alloy powders', Mater. Sci. Eng., A 402 (2006) 228