초록
디스플레이 특성화 방법, 예를 들어 gain-offset-gamma (GOG) 모델 혹은 S-curve 모델에서는 일반적으로 디스플레이가 두 가지의 기본적인 특성, 즉 채널 색도 일관성과 채널 독립성을 가지고 있다고 가정한다. 하지만, 모바일 LCD의 경우, 이러한 가정은 잘 적용되지 않는다. 따라서 기존의 디스플레이 특성화 방법을 모바일 디스플레이에 적용하기 위해서는 부분적인 수정이 요구된다. 본 논문에서는 채널 색도 변화성의에 기인하여 나타나는 X, Y, Z 값의 전광 변환 함수의 차이를 고려하기 위해 각 채널당 X, Y, Z 값의 전광 변환 함수를 전부 모델링하는 방법을 제안한다. 또한, 채널 상호작용에 기인하여 나타나는 채널 사이의 충분하지 않은 가산성을 보상하기 위해 채널간 성분, 즉 cyan, magenta, yellow, gray에 대해서도 X, Y, Z 값의 전광변환 함수를 전부 모델링하여 이용한다. 실험을 통하여, 제안한 특성화 방법이 채널 색도 변화 또는 채널 의존성을 고려한 다른 특성화 방법에 비하여 모바일 디스플레이에서의 색 자극 값을 더욱 정확히 예측한다는 것을 보여 주었다.
Most display characterization methods, such as the gain-offset-gamma (GOG) model and S-curve model, generally assume that displays have two fundamental characteristics, channel -chromaticity-constancy and channel-independence. However, these assumptions are not so applicable in the case of liquid crystal (LC)-based mobile displays. Accordingly, modifications are required to enable the application of conventional display characterization methods to mobile displays. Therefore, this study proposes the modeling of distinct EOTFs in terms of the X, Y, and Z values for each channel to consider the differences among the EOTFs resulting from channel-chromaticity-inconstancy. In addition, to overcome the poor additivity property among the channels due to channel-interaction, the proposed method also models and uses the EOTFs of the X, Y, and Z values for the inter-channel components cyan, magenta, yellow, and gray Experimental results confirm that the mobile display color values predicted by the proposed characterization method are more accurate than those predicted by other characterization methods due to considering the channel-chromaticity-inconstancy and/or channel-dependence of the display.