DOI QR코드

DOI QR Code

Development of the 3-D Bulk Motion Index for In-Cylinder Flow Induced by Induction System (I) - Based on the 3-D CFD Simulation Results -

흡기시스템을 통해 실린더로 유도되는 공기의 3차원 Bulk Motion Index 개발 (I) - 3차원 유동해석결과를 중심으로 -

  • 윤정의 (강원대학교 메카트로닉스공학부) ;
  • 남현식 (강원대학교 대학원 정밀기계과) ;
  • 김명환 (강원대학교 대학원 정밀기계과) ;
  • 민선기 (GM대우오토엔테크놀로지 기술연구소) ;
  • 박병완 (GM대우오토엔테크놀로지 기술연구소) ;
  • 김기성 (전남대학교 기계자동차공학부)
  • Published : 2006.11.01

Abstract

In order to figure out the physical meaning of 3-D angular flow index for in-cylinder bulk motion, CFD analysis for the swirl and tumble steady flow test rig were made using commercial package STAR-CD. Computer simulations and rig tests on some kinds of induced flow conditions were carried out. Finally, based on the comparison between the simulated results and measured results, the physical meaning of 3-D angular flow index $|\longrightarrow_{N_B}|$, $\beta$ composed of swirl and tumble coefficients measured by steady flow test rig was described.

Keywords

References

  1. Jeong, J. W., Lee, G. H. and Kim, W. T., 2002, 'A Study on the Steady Intake Flow Characteristics of the Intake 3-Valve Cylinder Head,' Trans. of the KSME(B), Vol. 24, No. 6, pp. 137-145
  2. Johansson, B. and Soderberg, F., 1996, 'The ?Effect of Valve Strategy on In-Cylinder Flow and Combustion,' SAE960582, pp. 33-48
  3. Baker, T. G. and Nightingale, C. J. E., 1996, 'Port Throttling and Port De-activation Applied to a 4-Valve SI Engine,' SAE960587, pp. 87-99
  4. Yun, J. E., 2002, 'New Evaluation Index for Bulk Motion of In-Cylinder Flow Through Intake Port System in Cylinder Head,' ImechE, Part D : Journal of Automobile Engineering, Vol. 216, No. 6, pp. 513-521 https://doi.org/10.1243/09544070260137444
  5. Yun, J. E., 1999, 'A Study on Combined Effects Between Swirl and Tumble Flow of Intake Port System in Cylinder Head, ' KSAE, Vol. 7, No. 8, pp. 76-82
  6. Yun, J. E., 2005, 'Development of the 3-D Bulk Motion Index for In-Cylinder Flow Induced by Induction System (I) - Based on the Steady Flow Rig Test Results,' KSME Kangwon Conference, pp. 31~37