Journal of the Korean Institute of Electrical and Electronic Material Engineers (한국전기전자재료학회논문지)

The Korean Institute of Electrical and Electronic Material Engineers (한국전기전자재료학회)
권호 표지
DOI QR코드

DOI QR Code

Temperature Rise Test and Temperature Distribution Analysis of Pole Mount Mold Transformer with One-body Molding

일체형 주상용 몰드 변압기의 온도분포 및 특성 비교

  • 조한구 (한국전기연구원 재료응용연구단) ;
  • 이운용 (한국전기연구원 재료응용연구단) ;
  • 강택수 (한국전기연구원 재료응용연구단) ;
  • 최인혁 (한전전력연구원 송전기술연구그룹)
  • Published : 2006.12.01
Download PDF
⟨ Previous Next ⟩

Abstract

The mold transformers have been widely used in underground substations of large building and have some advantages when compared with oil-transformer. Those advantages are low fire risk, environmental compatibility, compact size and high reliability. The mold transformer is generally known to have cooling duct between low voltage and high voltage coil. To achieve better compact structure and low loss, mold transformers made by one body molding method has been developed. Nevertheless, such kinds of transformer need better cooling method because heat radiation between each winding is still of problem. The life of transformer is significantly dependent on the thermal behavior in windings. Many designers have calculated temperature distribution in transformers and hot spot point by finite element method(FEM) to analyze winding temperature rise. In this paper, the temperature distribution analysis of 100 kVA pole mold transformer for power distribution were investigated by FEM program and the thermal analysis results were compared with temperature rise test.

Keywords

References

  1. 조한구, '옥외용 몰드 주상변압기의 적용기술', 한국전력공사 기술개발, 제46집, p. 46, 2001
  2. 津野降司, '新型モ一ルド 變壓器', 電氣評論, p. 11, 1996
  3. N. Kamizawa and M. Kobayahi, 'Some examples of computer simulation for transformer design', Takaoka Review, Vol. 42, No.2, p, 26, 2000
  4. L. W. Pierce, 'Predicting hottest spot temperatures in ventilated dry type transformer windings', IEEE Trans. Power Delivery, Vol. 9, No.2, p. 160, 1994 https://doi.org/10.1109/59.331461
  5. T. Nakayama, T. Noda, and T. Banno, 'Numerical analysis technology of molded equipment', Takaoka Review, Vol. 43, No. 4, p. 60, 1998
  6. 조한구, 이운용, '몰드 절연물의 해석기술', 전기전자재료학회논문지, 15권, 7호, p. 33, 2002
  7. 前田孝夫, '一體注型方式によるモ一ルド 變壓器', 日本電氣協同硏究會, SA-91-70
  8. A. Fernandes-costa and Manuelvaz-Guedes, 'Prevision of The Thermal Behavior of Dry-Type Cast Resin Transformers', Electric Machines and Power Systems, p. 261, 1992
  9. 조한구, 이운용, 박영두, '일체형 주상용 몰드 변압기의 덕트에 따른 열해석 특성 연구', 전기전자재료학회논문지, 17권, 3호, p. 348, 2004
  10. 조한구, 이운용, '50 kVA 주상용 몰드 변압기의 설계 및 특성평가', 한국전기전자재료학회 2002춘계학술대회논문집, p. 298, 2002