References
- A. Roth, Vacuum Sealing Techniques, Pergamon Press, 1966
- W.R. Wheeler and M. Carlson, Ultra-high vacuum flanges, Natl. Sym. Vacuum Technol. Trans. 1961, 1309(1962)
- I. Sasaki, H. Ishimaru, G. Horikoshi, Sealing concept of elastic metal gasket Helicoflex, Vacuum 32, 33(1982) https://doi.org/10.1016/S0042-207X(82)80193-0
- K. Obara et al., A study for the improvement on knife-edge metal-seal flange, Jap. J. Vac. Soc. 32, 2(1989) https://doi.org/10.3131/jvsj.32.2
- K.M. Welch et al., Metal and elastomer seal tests for accelerator applications, Vacuum 41, 1924(1990) https://doi.org/10.1016/0042-207X(90)94133-B
- S. Kurokouchi, S. Morita and S. Morita, Characteristics of a taper-seal type gasket for the Conflat sealing system, J. Vac. Sci. Technol. A19, 2963(2001)
- T. Wikberg and E. Dodelin, FEM calculation of UHV all-metal demountable joints for LEP, CERN-LEP-VA/89-49, 1989
- R.B. Fleming, R.W. Brocker and D.H. Mullaney, Development of bakeable seals for large noncircular ports on the TFTR, J. Vac. Sci. Technol. 17, 337(1980) https://doi.org/10.1116/1.570381
- A. Roth, The influence of the surface roughness on the specific leak rate of the gasket seals, Vacuum 20, 431(1970) https://doi.org/10.1016/S0042-207X(70)80056-2
- S. Kurokouchi, et al., Reconsideration on ConFlat seal mechanism by gasket deformation measurements (in Japanese), J. Vac. Soc. Jpn. 42, 910(1999) https://doi.org/10.3131/jvsj.42.910