초록
FBG 센서는 다중화의 큰 장점으로 인해 다른 여러 광섬유 센서에 비해 더욱 활발한 연구가 진행 되어오고 있다. FBG 센서는 센서 피크 신호의 파장 이동량을 감지함으로써 변형률, 온도 등의 물리량을 측정하는 복조기법을 가지고 있다. 하지만, 센서를 구조물에 부착 혹은 삽입 적용하는 과정에서 구조물의 기하학적인 특성이나 결함 등에 의해 구조물에 변형률 구배가 발생할 수 있으며 이는 센서의 격자 부분에 작용할 경우 센서 피크 신호의 안정성에 영향을 미처 측정 오차로 작용하게 된다. 본 연구에서는 FBG 센서의 격자 부분에 변형률 구배가 작용할 경우 변형률 구배에 따른 FBG 센서의 신호 특성을 고찰하였고 또한 격자의 길이와 변형률 구배의 상관관계에 대해 알아보았다. 이를 통해, 변형률 구배가 작용할 경우 FBG 센서의 적절한 사용 영역을 FBG 센서의 격자 길이에 따라 정량적으로 제시하였다.
FBG sensors have been studied more actively than any other fiber optic sensor because of good multiplexing capabilities among many fiber optic sensors. The demodulation method of FBG sensors is based on the detection of wavelength shift of their sensor peaks and properties such as strain and temperature can be measured by detecting them. However, the signal stability of FBG sensors can be influenced by the strain gradient induced by structural geometry or cracks on the surface when FBG sensors are embedded into or attached on the structure. In this study, the signal characteristics of reflected spectra of FBG sensors under strain gradient were verified and the relations between the grating length of FBG sensors and the amount of strain gradient were investigated. From the experimental results, the recommended working range of FBG sensors under strain gradients was shown quantitatively with respect to grating lengths of them.