DOI QR코드

DOI QR Code

부식환경하에서 Al 7075-T6의 피로수명에 미치는 쇼트피닝의 효과에 관한 연구

A Study on the Effect of Shot Peening on the Fatigue Life of Al 7075-T6 under Corrosion Environment

  • 정성균 (서울산업대학교 기계공학과) ;
  • 남지헌 (서울산업대학교 산업대학원) ;
  • 구대림 (산업자원부 산업표준품질과) ;
  • 노승남 (서울산업대학교 기계공학과)
  • 발행 : 2005.02.01

초록

부식은 기계류나 금속 부품의 성능과 수명을 저해하는 가장 큰 요인으로 작용하고 있다. 이 논문에서는 쇼트피닝이 부식환경하에서 Al 7075-T6의 피로수명에 미치는 쇼트피닝의 효과를 연구하였다. 쇼트피닝한 시험편의 피로한도는 약 52% 증가하는 것으로 나타났으며, 금속재 부품의 피로수명을 크게 연장시키는 것으로 보인다. 쇼트피닝을 한 시험편과 쇼트피닝 하지 않은 시험편을 1주에서 1년까지 비교 시험한 결과 부식은 피로강도를 현격히 감소시켰다. 쇼트피닝을 하였을 경우에는 부식에 의해 6개월 까지는 피로강도 및 피로수명이 감소하지 않은 것으로 나타났다. 따라서 쇼트피닝 가공이 금속재료의 수명에 대한 부식의 영향을 크게 감소시키는 효과가 있음을 알 수 있다.

Corrosion highly affects the lifetime and performance of machinery metallic components. The effects of shot peening on the fatigue life of Al 7075-T6 under corrosive environment are investigated in this paper. Experimental results show that the fatigue limit of shot peened specimen increases about 52%. That means the fatigue life of metallic components is highly extended by shot peening. The corrosion greatly reduces the fatigue strength depending on the corrosive condition from one week up to one year. In case of shot peened specimen, the corrosion does not reduce the fatigue strength and fatigue life up to six months. It means that the shot peening has superior effectiveness to reduce the influence of corrosion to the metallic materials.

키워드

참고문헌

  1. Denny A. Jones, 1996, 'Principles and Prevention of Corrosion', Prentice Hall, Inc
  2. D. Y. Lee, 1988, 'Fracture and Fatigue under Corrosion Environmental', Transactions of the KSME, Vol. 28, No. 4, pp. 313-321
  3. Y. G. Kwon, 1989, 'Corrosion Fatigue', Transactions of the KSME, Vol. 29, No. 2, pp. 138-143
  4. W. Koehler, Dr.-Ing, 1984, 'Influence of Shot Peening with Different Peening Materials on the Stress Corrosion and Corrosion Fatigue Behavior of a Welded AIZnMg Alloy', Proc. of the 2nd International Conference on Shot Peening, Vol. 1, pp. 126-132
  5. M. O. Speidel, 1981, 'Effect of Shot Peening on Stress Corrosion Cracking and Corrosion Fatigue', Proc. of the 1st International Conference on Shot Peening, Vol. 1, pp. 625-635
  6. Kirt, D. and Jarrett, M, 1984, 'Influence of Shot Peening on Fatigue and Corrosion -Fatigue Behavior of Structural Steel', Proc. of the 2nd International Conference on Shot Peening, Vol. 1, pp. 133-142
  7. Sharma, M. C., 1996, 'Assesment of Over Peening by time on Fatigue behavior of Spring Steel', Proc. of 6th International Fatigue Congress, pp. 1397-1402
  8. Muller, M. P., Verpoort, C. and Gessinger, G. H, 1981, 'The Influence of shot Peening on the Fatigue and Corrosion Fatigue Behavior of an Austentic-Ferritic Stainless Steel', Proc. of the 1st International Conference on Shot Peening, Vol. 1, pp. 479-484
  9. S. K. Cheong, T. H. Kim, 2003, 'A Study on the Optimum Shot Peening Condition for AI7075-T6', Transactions of the KSAS, Vol. 31, No. 7, pp. 63-68
  10. Murat Aydin, Temel Savaskan, 2004, 'Fatigue properties of zinc-aluminium alloys in 3.5% NaCl and and 1% HCl solutions', International Journal of Fatigue, Volume 26, Issue 1, pp. 103-110 https://doi.org/10.1016/S0142-1123(03)00091-4
  11. B. Huneau, J., Mendez, 2003, 'Fatigue behavior of a high strength steel in vacuum in air and in 3.5% NaCl solution under cathodic protection', Materials Science and Engineering A, Volume 345, Issues 1-2, pp. 14-22 https://doi.org/10.1016/S0921-5093(02)00397-0
  12. Lifka B, Sprowls D, 1970, 'Shot Peening - A Stress Corrosion Cracking Preventive for High Strength Aluminium Alloy', Proc. of the 26th annual Conference, NACE, U.5.A., pp. 4-6
  13. Sprowls D and Brown R, 1962, 'What Every Engineer should Know about Stress Corrosion of Aluminium', Metal Progress, pp. 1-5