DOI QR코드

DOI QR Code

강섬유보강 경량 폴리머 콘크리트의 역학적 거동

Mechanical Behavior of Steel Fiber Reinforced Lightweight Polymer Concretese

  • Youn, Joon-No (Institute of Agricultural Science, College of Agriculture and Life Science, Chungnam National University) ;
  • Sung, Chan-Yong (Department of Rural Infrastructure Engineering, College of Agriculture and Life Science, Chungnam National University)
  • 발행 : 2005.03.01

초록

In this study, the physical and mechanical properties of steel fiber reinforced lightweight polymer concrete were investigated experimentally with various steel fiber contents. All tests were performed at room temperature, and stress-strain curve and load-deflection curve were plotted up to failure. The unit weight of steel fiber reinforced lightweight polymer concrete was in the range of $1,020{\sim}1,160\;kg/m^3$, which was approximately $50\%$ of that of the ordinary polymer concrete, The compressive strength, splitting tensile strength, flexural toughness and flexural load-deflection curves after maximum load were shown with increase of steel fiber content. The stress-strain curves of steel fiber reinforced lightweight polymer concrete were bilinear in nature with a small transition zone, Based on these results, steel fiber reinforced lightweight polymer concrete can be widely applied to the polymer composite products.

키워드

참고문헌

  1. ACI Committee 213, Guide for structural lightweight aggregate concrete. 1970
  2. Balaguru, P. and A. Foden, 1996, Properties of fiber reinforced structural lightweight concrete, ACI Materials Journal, 93(1): 63-78
  3. Fowler, D. W., 1999, Polymers in concrete: a vision for the 21st century. Cement & Concrete Composite, 21 (5.6): 449-52 https://doi.org/10.1016/S0958-9465(99)00032-3
  4. Holm, T. A. and T. W. Bremner, 1994, High strength lightweight aggregate concrete. In: Shah SP, Ahmad SH, editors. High performance concrete: properties and applications. New York, McGraw-Hill: 341-374
  5. Mindess, S., L. Chen and D. R. Morgan, 1994, Determination of the first crack strength and flexural toughness of steel fiber reinforced concrete, Advanced Cement Based Materials, 1 (5): 201-208 https://doi.org/10.1016/1065-7355(94)90025-6
  6. Mor, A., 1992, Steel-concrete bond in high-strength lightweight concrete, ACI Material Journal, 89 (1): 76-82
  7. Paturoyer, V. V., 1986, Recommendations on polymer concrete mix design, NIZHB, Moscow: 18
  8. Rebeiz, K. S. and D. W. Fowler, 1996, Shear and flexure behavior of reinforced polymer concrete made with recycled plastic wastes, Properties and Uses of Polymers in Concrete, American Concrete Institute, American Concrete Institute: 62-77
  9. Rebeiz, K. S. and A. P. Craft, 2002, Polymer concrete using coal fly ash. Journal of the Energy Engineering, 128(3): 62-73 https://doi.org/10.1061/(ASCE)0733-9402(2002)128:3(62)
  10. Reinhardt, H. W. and A. E. Naaman, 1992, High performance fiber reinforced cement composites, Proceedings of the International Workshop, London, E & FN Spon
  11. Sung, C. Y. and K. T. Kim, 1997, Engineering properties of surlightweight polymer concrete, Journal of the Korean Society of Agricultural Engineers, 39(4): 75-81. (in Korean)
  12. Yeon, K. S., K. W. Kim, K. S. Kim and K. H. Kim, 1993, Effects of fillers on mixing and mechanical properties of polymer concrete, Journal of the Korean Society of Agricultural Engineers, 35(2): 81-91. (in Korean)