Polymer(Korea) (폴리머)

The Polymer Society of Korea (한국고분자학회)
권호 표지

Preparation and Thermal Conductivity of Poly(organosiloxane) Rubber Composite with Low Hardness

저경도 Poly(organosiloxane) Rubber Composite의 제조와 열전도 특성

  • Kang Doo Whan (Hyperstructured Organic Materials Research Center, Department of Polymer Science & Engineering, Dankook University) ;
  • Yeo Hak Gue (Hyperstructured Organic Materials Research Center, Department of Polymer Science & Engineering, Dankook University)
  • 강두환 (고차구조형 유기산업재료 연구센터 및 단국대학교 고분자공학과) ;
  • 여학규 (고차구조형 유기산업재료 연구센터 및 단국대학교 고분자공학과)
  • Published : 2005.03.01
Download PDF
⟨ Previous Next ⟩

Abstract

$\alpha,\omega-Vinyl$ poly(dimethyl-methylphenyl) siloxane propelymer (VPMPS ) was prepared by the equilibrium polymerization of octamethylcyclotetrasiloxane $(D_4)$, 1,3,5-trimethyl-1,3,5-triphenylcyclotrisiloxane $(D_3^{MePh})$, and 1,1,3,3-tetramethyl-1,3-divinylsiloxane (MVS) as end-blocker. And also, $\alpha,\omega-hydrogen$ poly(dimethyl-methyltrifluoropropyl)siloxane prepolymer (HPDMFS) was prepared from $D_4$, 1,3,5-trimethyl-1,3.5-trifluoropropylcyclotrisiloxane $(D_3^{MeF3P})$, and 1,1,3,3-tetramethyldisiloxane. Poly(organosiloxane) rubber composite containing high thermal conductive filler was prepared by compounding VPMPS, HPDMFS, spherical alumina, and catalyst in high speed dissolver. The crosslinking density of poly (organosiloxane) composite was measured by oscillation rheometer. Poly(organosiloxane) composites of TC-POXR-2 and TC-POXR-4 prepared by controlling average diameters of thermal conductive filler, spherical alumina according to Horsfield's packing model were shown to 1.13 W/mK for TC-POXR-2 and 1.19 W/mK for TC-POXR-4.

Octamethylcyclotetrasiloxane$(D_4)$과 1,3,5-trimethyl-1,3,5-triphenylcyclotrisiloxane$(D_3^{MePh})$을 1,1,3,3,-tetramethyl-1,3-divinylsiloxane(MVS)과 평형중합시켜 dimethylsiloxane과 methylphenylsiloxane block unit를 갖는 $\alpha,\omega-vinyl$ poly(dimethyl-methylphenyl)siloxane prepolymer(VPMPS)를 제조하였으며 또한 $D_4$와 1,3,5-trimethyl-1,3,5-trifluoropropylcyclotrisiloxane $(D_3^{M3,F3P})$을 1,1,3,3-tetramethyldisiloxane과 평형중합시켜 dimethylsiloxane과 methyltrifluoropropyl siloxane block unit를 갖는 $\alpha,\omega-hydrogen$ poly(dimethyl-methyltrifluoropropyl)siloxane prepolymer(HPDMFS)를 제조하였다. VPMPS, HPDMFS, 열전도 필터 및 촉매를 고속교반기에 가하고 $130^{\circ}C$에서 컴파운딩하여 저경도 poly(organosiloxane) rubber를 제조하였으며 이의 가교밀도는 $115^{\circ}C$에서 oscillation rheometer를 이용하여 측정하였다. 열전도성 충전제로 구상 알루미나를 Horsfield's packing model에 따라 평균입자경의 분포를 조절하여 제조한 composite TC-POXR-2의 열전도도가 1.13 W/mK, 그리고 TC-POXR-4가 1.19 W/mK였으며 이는 단일입자경을 갖는 충전제를 가하여 제조한 경우보다 높은 열전도성을 나타내었다.

Keywords

References

  1. T. Mori and M. Senda, IEICE Trans. Commun., 83, 600 (2000)
  2. J. Joo and C. Y. Lee, J. Appl. Phys., 88, 513 (2000)
  3. Yama Kawa, et al., Japan Pat. 8-325457 (1996)
  4. D. C. Degree, U.S. Pat. 4,574,879 (1986)
  5. W. O. Smith, Phys. Rev., 34, 1272 (1929)
  6. T. B Lewis and J. E. Nielsen, J. Appl. Polym. Sci., 14, 1449 (1970)
  7. D. R. Dinger and J. E. Flunk, Particle Packing ; Review of Packing theories, Fine Particle Socity, 13th Annual Meeting, Chicago, 1982
  8. F. S. Ortega, R. G. Pileggi, P. Sepulveda, and V. C. Pandolfelli, Am. Ceram. Soc. Bull., 78, 106 (1999)
  9. C. S. Elsbernd, M. Spinu, V. J. Krukonis, P. M, Gallagher, D. K. Mohanty, and J. E. McGrath, Silicone-based Polymer Science, American Chemical Society, Washington, p.145 (1990)
  10. J. E. Mcgrath, J. S. Riffle, L. Yilgor, and A. K. Banthia, ACS Symp. Ser., No. 211, Chapter 2, 1983
  11. D. W. Kang, K. S. Lee, H. G. Yeo, and J. S. Shim, J. Korean Ind. Eng. Chem., 13, 594 (2002)
  12. A. R. Gilbert and S. W. Kantor, J. Polym. Sci., 40, 35 (1959)
  13. S. G. Park and S. W. Ko, J. Korean Fiber Soc., 32, 494 (1995)
  14. Edgar E. Bostick, et al., U. S. Patent 3,337,497 (1967)
  15. W. Buchner, R. Schliebs, G. Winter, and K. H. Buchel, Industrial Inorganic chemistry, Freedom Academy Pub. Co., Seoul, p.359 (1995)