Abstract
This study attempts to address the development processing of yarn-dyeing jacquard design by using jacquard textile design professional CAD system to create high valued worth products. To carry out this purpose, two kinds of necktie samples were designed and each of them was different in three types of weaving method. The results are as follows; All over type is appropriate when the motive's size is small. And the work can be finished within short time and design can be illustrated by basic jacquard system. However, one point type can represent rather big and audacious motive but it needs lots of working hours and jacquard system. Though the motives are identical, showed many changes in cubicle representation according to weaving methods and the structure. To express simple and modest design, single fabric woven is suitable and in the need of colorful and technical design, expressing by double weft cloths and triple weft cloths rather than single fabric woven are better to give creativity and colorfulness. For the production of jacquard design, cad system using ability is important but the understanding and study of the whole process of weaving development should be made.