한국산업융합학회 논문집 (Journal of the Korean Society of Industry Convergence)
- 제8권1호
- /
- Pages.31-36
- /
- 2005
- /
- 1226-833X(pISSN)
- /
- 2765-5415(eISSN)
응답표면법에 의한 알루미늄합금의 가공면 거칠기에 관한 연구
A Study on the Surface Roughness of Aluminum Alloy by Response Surface Nethod
- 구자성 (경남대학교 대학원 기계공학과) ;
- 김원일 (경남대학교 공과대학 기계자동화공학부) ;
- 이윤경 (경남대학교 공과대학 기계자동화공학부) ;
-
왕덕현
(경남대학교 공과대학 기계자동화공학부) ;
- 박지호 (경남대학교 대학원 기계공학과)
- Gu, Ja-Sung (Graduate School of Kyungnam Univ.) ;
- Kim, Won-Il (Dept. of Mechanical Engineering, kyungnam Univ.) ;
- Lee, Yun-Kyung (Dept. of Mechanical Engineering, kyungnam Univ.) ;
-
Wang, Duk-Hyun
(Dept. of Mechanical Engineering, kyungnam Univ.) ;
- Park, Ji-Ho (Graduate School of Kyungnam Univ.)
- 투고 : 2004.07.15
- 심사 : 2005.02.15
- 발행 : 2005.02.28
초록
The purpose of this experimental study is to gain equations for the prediction of surface roughness depending on the three major parameters(the cutting speed, the feed rate and the nose radius). It is the merit of Response Surface Methodology that the test time is reduced to minimum size and accurate analysis can be done. On this study, first, made specimen, Al 5052 BE material which is widely used in school and cut the specimen with coated tungsten carbide tools, by varying the cutting conditions, such as the cutting speed, the feed rate and the nose radius. In conclusion, the surface roughness was most greatly influenced by the feed rate. And Surface Roughness equation gained by experiment is as followed