DOI QR코드

DOI QR Code

The future role of smart structure systems in modern aircraft

  • Becker, J. (EADS Deutschland GmbH, Military Aircraft, Technical University of Munich, Institute of Fluidmechanic) ;
  • Luber, W. (EADS Deutschland GmbH, Military Aircraft) ;
  • Simpson, J. (EADS Deutschland GmbH, Military Aircraft) ;
  • Dittrich, K. (EADS Deutschland GmbH, Military Aircraft)
  • 투고 : 2004.07.28
  • 심사 : 2005.03.25
  • 발행 : 2005.04.25

초록

The paper intends to summarize some guidelines for future smart structure system application in military aircraft. This preview of system integration is based upon a review on approximately one and a half decades of application oriented aerospace related smart structures research. Achievements in the area of structural health monitoring, adaptive shape, adaptive load bearing devices and active vibration control have been reached, potentials have been identified, several feasibility studies have been performed and some smart technologies have been already implemented. However the realization of anticipated visions and previously initial timescales announced have been rather too optimistic. The current development shall be based on a more realistic basis including more emphasis on fundamental aircraft strength, stiffness, static and dynamic load and stability requirements of aircraft and interdisciplinary integration requirements and improvements of integrated actors, actuator systems and control systems including micro controllers.

키워드

참고문헌

  1. Becker, J. and Luber, W. G. (1998), "Comparison of piezoelectric systems and aerodynamic systems for aircraft vibration alleviation", Proceedings of SPIE, 3326, 13-27.
  2. Becker, J., Schröder, W., Dittrich, K., Bauer, E. J. and Zippold, H. (1999), "The advanced aircraft structures program - an overview", Proceedings of SPIE, 3674, 2-13.
  3. Becker, J. (2002), "Active buffeting vibration alleviation - demonstration of intelligent aircraft structure for vibration & dynamic load alleviation", ESF-NSF Workshop on Sensor Technologies and Intelligent Structure, Como, Italy.
  4. Berchtold, G., et al. (2001), "Impact of electromagnetical structures on future air vehicles", Keynote, Proceedings of the 10th European Electromagnetic Structures Conference (EESC), Munich, Germany.
  5. Breitsamter, Ch. (1999), "Aerodynamic active vibration control for single-fin buffeting alleviation", Deutscher Luft- und Raumfahrtkongress / DGLR Jahrestagung, Berlin, Germany.
  6. Breitsamter, Ch. and Laschka, B. (2000), "Aerodynamic active control for EF-2000 fin buffet load alleviation", AIAA 2000-0656, 38th Aerospace Sciences Meeting Exhibit, Reno, NV., USA.
  7. Breitsamter, Ch. (2003), "Aerodynamik hochmanoevrierfaehiger flugzeuge mit formvariablen hinterkantenklappen", DGLR-2003-126, Deutscher Luft- und Raumfahrtkongress, Muenchen, Germany.
  8. Breitsamter, Ch. (2004), "Aerodynamic efficiency of high maneuverable aircraft applying adaptive wing trailing edge section", ICAS-2004-4.3.2, 24th Congress of the International Council of the Aeronautical Sciences.
  9. Dittrich, K. (1994), "Formveränderung von flügelstrukturen mittels integrierter shape memory alloy aktuatoren (Shape change of wing structures with integrated shape memory alloy actuators)", Proceedings of the DGLR Conference, Erlangen, Germany.
  10. Dittrich, K. (1998), "Prospects of smart structures for future aircrafts", NATO Advanced Study Institute Mechanics of Composite Materials and Structures", Troia, Portugal.
  11. Dittrich, K., Simpson, J., Becker, J., Dürr, J. K., Floeth, E., Ihler, E., Herold-Schmidt, U. and Zaglauer, H. W. (1999), "Fin-buffet alleviation via distributed piezoelectric actuators: materials qualification program", Proceedings of SPIE, 3674.
  12. Dittrich, K. et al. (1999), "Structural health monitoring (Strukturueberwachung)", Military technology symposium at WIWEB, Erding, Germany.
  13. Dittrich, K. (2000), "Structural concepts for future uninhabited combat aerial vehicles (UCAV)", Proceedings of the RTO Conference on Unmanned Vehicles (UV) for Aerial, Ground and Naval Military Operations, RTO Meeting proceedings MP-052, Ankara, Turkey.
  14. Dittrich, K. et al. (2001), "Radar absorbing structure with integrated PIN diode network", Proceedings of the 10th European Electromagnetic Structures Conference, Munich, Germany.
  15. Dittrich, K. et al. (2003), "In-flight measurement of acoustic background noise for the development of impact detection algorithms", Proceedings of the SPIE NDE and Health Monitoring Conference, Vol. 5046-37, San Diego, USA.
  16. Dittrich, K., Becker, J. and Luber, W. (2004), "Structural concepts of morphing wing", Third European Conference on Structural Control, 3ECSC, Vienna University of Technology, Vienna, Austria.
  17. Durr, J. K., Floeth, E., Herold-Schmidt, U., Ihler, E., Zaglauer, H. W., Becker, J., Dittrich, K., Manser, R. and Simpson, J. (1999), "Fin-buffet alleviation via distributed piezoelectric actuators: materials qualification program and full-scale demonstrator tests", Proc. Adaptronic Congress, Potsdam, Germany.
  18. Durr, J. K., Krohn, N., Nixdorf, K., Lütze, S., Herold-Schmidt, U. and Busse, G. (1999), "Non-destructive testing of surface bonded piezoelectric patch actuators", Proceedings of SPIE, 3674.
  19. Durr, J. K., Herold-Schmidt, U., H. Zaglauer, H. and Becker, J. (2000), "Active fin-buffeting alleviation for fighter aircraft", RTO Structure & Materials Conference Braunschweig, Germany.
  20. Kaiser, S., Melcher, J., Breitbach, E. J. and Sachau, D. (1999), "Structural dynamic health monitoring of adaptive CFRP structures", Proceedings of SPIE, 3674, 51-60.
  21. Kress, K.-P. et al. (2001), "Smart wide-area imaging sensor system (SWISS)", Proceedings of the SPIE Smart Structures and Materials Conference, Vol. 4332, Newport Beach, USA.
  22. Kress, K.-P. et al. (2002), "Imaging ultrasonic sensor system SWISS completed 60000 simulated flight hours to check structural integrity of aircraft subcomponent", Proceedings of the SPIE NDE and Health Monitoring Conference, Vol. 5046-39, San Diego, USA.
  23. Kress, K.-P., et al. (2003), "Integrated imaging ultrasound (SWISS)", International Workshop on Structural Health Monitoring, Stanford 2003, USA.
  24. Kress, K.-P. et al. (2003), "Overview on the AHMOS project", International Workshop on Structural Health Monitoring, Keynote, Stanford, USA.
  25. Manser, R., Simpson, J., Becker, J., Dürr, J. K., Floeth, E., Herold-Schmidt, U., Stark, H. and Zaglauer, H. W. (1999), "Fin-buffet alleviation via distributed piezoelectric actuators: full-scale demonstrator tests", Procceedings of SPIE, 3674, 13-21.
  26. Schweiger, J. and Simpson J. (1999), "Needs for analysis and integrated design optimization of active and passive structure for active aeroelastic wings", SPIE's 6th Annual International Symposium "Smart Structures and Materials", Newport Beach, California, CA, USA.
  27. Simpson, J., Schweiger, J. (1998), "Industrial approach to piezoelectric damping of large fighter aircraft components", Proceedings of SPIE, 3326, 34-47.
  28. Simpson, J. (2001), "Current approaches to reduce structural dynamic impacts on the performance of aircraft mounted sensor systems", International Forum on Aeroelasticity and Structural Dynamics, Madrid, Spain.
  29. Simpson, J. et al. (2004), "Aktive Lagerung für Avionik Integration und Erprobung", Adaptronic Congress, Hildesheim, Germany.
  30. Stüwing, M., Sachau, D. and Breitbach, E. J. (1999), "Adaptive vibration damping of fin structures", Procceedings of SPIE, 3674, 31-39.

피인용 문헌

  1. Active wing design with integrated flight control using piezoelectric macro fiber composites vol.18, pp.3, 2009, https://doi.org/10.1088/0964-1726/18/3/035010
  2. NEURAL ADAPTIVE CONTROL FOR VIBRATION SUPPRESSION IN COMPOSITE FIN-TIP OF AIRCRAFT vol.18, pp.03, 2008, https://doi.org/10.1142/S0129065708001543