DOI QR코드

DOI QR Code

Material and workmanship requirements for modern codes of practice

  • Banfi, M.J.A. (Arup) ;
  • Cardwell, S. (Arup) ;
  • Gedge, G. (Arup) ;
  • Murgatroyd, E.C. (Arup)
  • 투고 : 2004.07.27
  • 심사 : 2005.01.25
  • 발행 : 2005.04.25

초록

Current codes of practice do not exist in isolation, and rules that have been developed assume certain material properties and minimum workmanship in fabrication and erection. These are either in separate documents or different parts of the code. This paper explains the main requirements for materials and workmanship and how they can be related to design and construction in general. The use of very high strength steels is also considered and the measures that may be needed to allow their use with modern codes are also presented.

키워드

참고문헌

  1. A6/A6M-03c (2003), Standard Specification for General Requirements for Rolled Structural Steel Bars, Plates, Shapes and Sheet Piling, ASTM.
  2. A370-03a (2003), Standard Test Methods and Definitions for Mechanical Testing of Steel Products, ASTM.
  3. A500-03a (2003), Standard Specification for Cold-Formed Welded and Seamless Carbon Steel Structural Tubing in Rounds and Shapes, ASTM.
  4. A992/A992M-03 (2003), Standard Specification for Structural Steel Shapes, ASTM.
  5. AS 4100-1998 (1998), Australian Standard, Steel Structures, Standards Australia.
  6. BS EN 10002-1:2001 (2001), Metallic Materials - Tensile Testing-Part 1: Method of Test at Ambient Temperature, BSI.
  7. BS EN 10025:1993 (1993), Hot Rolled Products of Non-Alloy Steels - Technical Delivery Conditions, BSI.
  8. BS EN 10045-1:1990 (1990), Charpy Impact Test on Mateallic Materials. Part 1. Test Method (V-and Unotches), BSI.
  9. BS EN 10210-2:1997 (1997), Hot Finished Structural Hollow Sections of Non-Alloy and Fine Grain Steels. Part 2. Tolerances, Dimensions and Sectional Properties.
  10. BS EN 10219-2:1997 (1997), Cold Formed Welded Structural Hollow Sections of Non-Alloy and Fine Grain Steels. Part 2. Tolerances, Dimensions and Sectional Properties.
  11. BS EN 1990:2002 (2002), Eurocode-Basis of Structural Design, BSI.
  12. BS 5950-1:2000 (2001), Structural Use of Steelwork in Building - Part 1: Code of Practice for Design-Rolled and Welded Sections, BSI.
  13. Gulvanessian, H., Calgaro, J.-A. and Holicky, M. (2002), Designers' Guide to EN 1990, Eurocode: Basis of Structural Design, Thomas Telford.
  14. Sedlacek, G., Brozzetti, J. and Schleich, J.-B. (1999),"Eurocodes an opportunity for steel construction," Int. Conf., Steeling the Competitive Edge, London 1999. BCSA/ECCS.

피인용 문헌

  1. Structural coupling mechanism of high strength steel and mild steel under multiaxial cyclic loading vol.27, pp.2, 2018, https://doi.org/10.12989/scs.2018.27.2.229