참고문헌
- American Society of Civil Engineers (2002), Minimum Design Loads for Buildings and Other Structures. ASCEStandard SEI/ASCE 7-02, A.S.C.E., Reston, Virginia.
- Batts, M.E., Cordes, M.R., Russell, L.R., Shaver J.R. and Simiu, E. (1980), "Hurricane wind speeds in theUnited States", Rep No. BSS-124, Nat. Bureau of Standards, U.S. Department of Commerce, WashingtonD.C.
- British Standards Institution (1997), Loading for Buildings. Part 2. Code of Practice for Wind Loads. BS6399:Part 2: 1997. B.S.I. London.
- Choi, E.C.C. and Tanurdjaja, A. (2002), "Extreme wind studies in Singapore. An area with mixed weathersystem", J. Wind Eng. Ind. Aerodyn., 90, 1611-1630. https://doi.org/10.1016/S0167-6105(02)00274-X
- Cook, N.J. (1982), "Towards better estimation of extreme winds", J. Wind Eng. Ind. Aerodyn., 9, 295-323. https://doi.org/10.1016/0167-6105(82)90021-6
- Cook, N.J. (1983), "Note on directional and seasonal assessment of extreme winds for design", J. Wind Eng. Ind.Aerodyn., 12, 365-372. https://doi.org/10.1016/0167-6105(83)90057-0
- Cook, N.J. (1985), The Designer's Guide to Wind Loading of Building Structures, Butterworths.
- Cook, N.J., Harris, R.I. and Whiting, R. (2003). "Extreme wind speeds in mixed climates revisited", J. WindEng. Ind. Aerodyn., 91, 403-422. https://doi.org/10.1016/S0167-6105(02)00397-5
- Davenport, A.G. (1968), "The dependence of wind loads on meteorological parameters", Proceedings of theInternational Research Seminar on Wind Effects on Buildings and Structures, Ottawa, 11-15 September 1967,University of Toronto Press.
- Davenport, A.G., Georgiou, P.N. and Surry, D. (1985), "Hurricane wind risk study for the Eastern Caribbean,Jamaica and Belize, with special consideration of the effects of topography", Report BLWT-SS31-1985.University of Western Ontario.
- Dorman, C.M.L. (1983), "Extreme wind gust speeds in Australia, excluding tropical cyclones", Civ. Eng. Trans.I. E. Aust., 25, 96-106.
- Drayton, M.A. (2000), "A stochastic basin-wide model of Atlantic hurricanes", Proc. 24th Conf. on Hurricanesand Tropical Meteorology, Fort Lauderdale, Florida, USA, 553-554.
- European Committee for Standardization (1994), Eurocode 1: Basis of Design and Actions on Structures. Part 2-4: Wind actions. ENV-1991-2-4, C.E.N., Brussels.
- Fisher, R.A. and Tippett, L.H.C. (1928), "Limiting forms of the frequency distribution of the largest or smallestmember of a sample", Proc. Camb. Phil. Soc.: Part 2, 112, 125-159.
- Georgiou, P.N (1985), "Design wind speeds in tropical cyclone-prone regions", Ph.D. Thesis, University ofWestern Ontario, London, Ontario, Canada.
- Gomes, L. and Vickery, B.J. (1977), "Extreme wind speeds in mixed wind climates", J. Ind. Aerodyn., 2, 331-344.
- Gringorten, I.I. (1963), "A plotting rule for extreme probability paper", J. Geophys. Res., 68, 813-814. https://doi.org/10.1029/JZ068i003p00813
- Gumbel, E.J. (1958). Statistics of Extremes. Columbia University Press, New York.
- Harris, R.I. (1996), "Gumbel re-visited − a new look at extreme value statistics applied to wind speeds", J. WindEng. Ind. Aerodyn., 59, 1-22. https://doi.org/10.1016/0167-6105(95)00029-1
- Holland, G.J. (1980), "An analytic model of the wind and pressure profile in hurricanes", Monthly Weather Rev.,108, 1212-1218. https://doi.org/10.1175/1520-0493(1980)108<1212:AAMOTW>2.0.CO;2
- Holmes, J.D. (2001), Wind Loading of Structures, Spon Press, London.
- Holmes, J.D. (2003), "Discussion of 'Generalized extreme gust wind speeds distributions' by E. Cheng and C.Yeung", J. Wind Eng. Ind. Aerodyn., 91, 956-957
- Holmes, J.D. and Moriarty, W.W. (1999), "Application of the generalized Pareto distribution to extreme value analysis in wind engineering", J. Wind Eng. Ind. Aerodyn., 83, 1-10. https://doi.org/10.1016/S0167-6105(99)00056-2
- Holmes, J.D. and Weller, R. (2002). Design Wind Speeds for the Asia-Pacific Region, Handbook HB-212,Standards Australia.
- Holmes, J.D., Melbourne, W.H. and Walker, G.R. (1990), A Commentary on the Australian Standard on WindLoads, Australian Wind Engineering Society.
- Hosking, J.R.M., Wallis, J.R. and Wood, E.F. (1985), "Estimation of the generalized extreme value distributionby the method of probability-weighted moments", Technometrics, 27, 251-261. https://doi.org/10.1080/00401706.1985.10488049
- Jarvinen, B.R., Neumann, C.J. and Davis, M.A.S. (1984), "A tropical cyclone data tape for the North AtlanticBasin, 1886-1983: contents, limitations and uses", NOAA Tech. Memo. NWS-NHC-22, U.S. Department ofCommerce, Washington, D.C.
- Kasperski, M. (1998), "Climate change and design wind load concepts", Wind and Struct., An Int. J., 1, 145-160. https://doi.org/10.12989/was.1998.1.2.145
- Kasperski, M. (2002), "A new wind zone map for Germany", J. Wind Eng. Ind. Aerodyn., 90, 1271-1287. https://doi.org/10.1016/S0167-6105(02)00257-X
- Lieblein, J. (1974), "Efficient methods of extreme-value methodology", Report NBSIR 74-602, National Bureauof Standards, Washington.
- Miller, C.A. (2002), "A design wind speed map for Europe derived from mean sea level pressuremeasurements", AGD 2002 Symposium, London, Ontario, Canada, June 20-22.
- National Research Council Canada (1995), National Building Code of Canada. N.R.C., Ottawa.
- Peterka, J.A. and Shahid, S. (1998), "Design gust wind speeds in the United States", J. Struct. Eng., ASCE, 124,207-214. https://doi.org/10.1061/(ASCE)0733-9445(1998)124:2(207)
- Russell, L.R. (1968), "Probability distributions for Texas Gulf Coast hurricane effects of engineering interest",Ph.D. Thesis, Stanford University, California, USA.
- Russell, L.R. (1971), "Probability distributions for hurricane effects", J. Water. Harb. Coast. Eng. Div. ASCE, 97,139-154.
- Sachs, P. (1972), Wind Forces in Engineering. Pergamon Press, Oxford.
- Shellard, H.C. (1963), "The estimation of design wind speeds", International Conference on Wind Effects onBuildings and Structures, Teddington, U.K. 26-28 June.
- Shellard, H.C. (1972), "Extreme wind speeds in the Commonwealth Caribbean", J. Barbados Assoc. Prof. Eng.
- Simiu, E. and Heckert, N.A. (1999), "Extreme wind distribution tails - a peaks over threshold approach", J.Struct. Eng., ASCE, 122, 539-547.
- Simiu, E. and Scanlan, R.H. (1996), Wind Effects on Structures. Fundamentals and Applications to Design, 3rded.., John Wiley & Sons, Inc., New York.
- Simiu, E., Bietry, J. and Filliben, J.J. (1978), "Sampling errors in estimation of extreme winds", J. Struct. Div.,ASCE, 104, 491-501.
- Standards Australia/Standards New Zealand (2002), Structural design actions. Part 2: Wind actions, Australian/New Zealand Standard AS/NZS 1170.2:2002, Standards Australia, Sydney.
- Vickery, P.J. and Twisdale, L.A. (1995), "Prediction of hurricane wind speeds in the United States", J. Struct.Eng., ASCE, 121, 1691-1699. https://doi.org/10.1061/(ASCE)0733-9445(1995)121:11(1691)
- Vickery, P.J., Skerlj, P.F. and Twisdale, L.A. (2000), "Simulation of the hurricane risk in the U.S. using empiricaltrack model", J. Struct. Eng, ASCE, 126, 1222-1237. https://doi.org/10.1061/(ASCE)0733-9445(2000)126:10(1222)
- Wieringa, J. (1996), "Representavity of extreme wind data", in Hydrology of Disasters, ed, V.P. Singh. KluwerPress.
- Zuranski, J.A. (1992), "Orographic effects on strong winds in Poland", J. Wind Eng. Ind. Aerodyn., 41-44, 417-426.
피인용 문헌
- Wind pressure coefficients on low-rise structures and codification vol.8, pp.4, 2005, https://doi.org/10.12989/was.2005.8.4.283
- Reliability and code level vol.8, pp.4, 2005, https://doi.org/10.12989/was.2005.8.4.295
- On the member reliability of wind force-resisting steel frames designed by EN and ASCE rules of load combinations vol.12, pp.5, 2005, https://doi.org/10.12989/was.2009.12.5.425
- Comparisons of Aerodynamic Data with the Main Wind Force-Resisting System Provisions of ASCE 7-16. I: Low-Rise Buildings vol.147, pp.3, 2021, https://doi.org/10.1061/(asce)st.1943-541x.0002925