Structural Engineering and Mechanics

  • 제21권6호
  • /
  • Pages.635-658
  • /
  • 2005
  • /
  • 1225-4568(pISSN)
  • /
  • 1598-6217(eISSN)
테크노프레스 (Techno-Press)
권호 표지
DOI QR코드

DOI QR Code

Detection of crack in L-shaped pipes filled with fluid based on transverse natural frequencies

  • Murigendrappa, S.M. (Mechanical Engineering Department, Indian Institute of Technology Bombay) ;
  • Maiti, S.K. (Mechanical Engineering Department, Indian Institute of Technology Bombay) ;
  • Srirangarajan, H.R. (Mechanical Engineering Department, Indian Institute of Technology Bombay)
  • 투고 : 2003.12.18
  • 심사 : 2005.09.28
  • 발행 : 2005.12.20
⟨ 이전 논문 다음 논문 ⟩

Abstract

The possibility of detecting a crack in L-shaped pipes filled with fluid based on measurement of transverse natural frequencies is examined. The problem is solved by representing the crack by a massless rotational spring, simulating the out-of-plane transverse vibration only without solving the coupled torsional vibration and using the transfer matrix method for solution of the governing equation. The theoretical solutions are verified by experiments. The cracks considered are external, circumferentially oriented and have straight front. Pipes made of aluminium and mild steel are tested with water as internal fluid. Crack size to pipe thickness ratio ranging from 0.20 to 0.57 and fluid (gauge) pressure in the range of 0 to 10 atmospheres are examined. The rotational spring stiffness is obtained by an inverse vibration analysis and deflection method. The details of the two methods are given. The results by the two methods are presented graphically and show good agreement. Crack locations are also determined by the inverse analysis. The maximum absolute error in the location is 13.80%. Experimentally determined variation of rotational spring stiffness with ratio of crack size to thickness is utilized to predict the crack sizes. The maximum absolute errors in prediction of crack size are 17.24% and 16.90% for aluminium and mild steel pipes respectively.

Keywords

References

  1. Bovsunovsky, A.P. and Matveev, V.V. (2000), 'Analytical approach to the determination of dynamic characteristics of a beam with a closing crack', J. Sound Vib., 235(3), 415-435 https://doi.org/10.1006/jsvi.2000.2930
  2. Chaudhari, T.D. and Maiti, S.K. (2000), 'Experimental verification of a method of detection of crack in taper and segmented beams based on modeling of transverse vibration', Int. J. of Fracture, 102, L33-L38 https://doi.org/10.1023/A:1007680215355
  3. Chaudhari, T.D. (2000), 'Modelling of transverse vibration of geometrically segmented beams to facilitate crack detection', Ph.D. Thesis, Department of Mechanical Engineering, Indian Institute of Technology Bombay
  4. Chondros, T.G and Dimarogonas, A.D. (1989), 'Dynamic sensitivity of structures to cracks', Transactions of the ASME Journal of Vibration, Acoustics, Stress and Reliability in Design, 111, 251-256 https://doi.org/10.1115/1.3269849
  5. Choy, F.K., Liang, R. and Xu, P. (1995), 'Fault identification in beams on elastic foundation', Computers Geotechnics 17(2), 157-176 https://doi.org/10.1016/0266-352X(95)93867-I
  6. Dimarogonas, A.D. (1996), 'Vibration of cracked structures: A state of the art review', Engineering Fracture Mechanics, 55(5), 831-857 https://doi.org/10.1016/0013-7944(94)00175-8
  7. Doebling, S.W., Farrar, C.E. and Prime, M.B. (1998), 'A summary review of vibration-based damage identification methods', The Shock and Vibration Digest, 30(2), 91-105 https://doi.org/10.1177/058310249803000201
  8. Gasch, R. (1993), 'A survey of the dynamic behavior of a simple rotating shaft with a transverse crack', J. Sound Vib., 160(2), 313-332 https://doi.org/10.1006/jsvi.1993.1026
  9. Hassiotis, S. and Jeong, GD. (1993), 'Assessment of structural damage from natural frequency measurement', Comput. Struct., 49(4), 679-691 https://doi.org/10.1016/0045-7949(93)90071-K
  10. Hassiotis, S. (1999), 'Identification of damage using natural frequencies and system moments', Struct. Eng. Mech., 8(3), 285-297 https://doi.org/10.12989/sem.1999.8.3.285
  11. Hu, J. and Liang, R.Y. (1993), 'An Integrated approach to detection of cracks using vibration characteristics', J. of the Franklin Institute, 330(5), 841-853 https://doi.org/10.1016/0016-0032(93)90080-E
  12. Kim, J.-T. and Stubbs, N. (2003), 'Crack detection in beam-type structures using frequency data', J. Sound Vib., 259(1), 145-160 https://doi.org/10.1006/jsvi.2002.5132
  13. Li, Q.S. (2002), 'Free vibration analysis of non-uniform beams with an arbitrary number of cracks and concentrated masses', J. Sound Vib., 252(3), 509-525 https://doi.org/10.1006/jsvi.2001.4034
  14. Liang, R.Y., Choy, F.K. and Hu, J. (1991), 'Detection of cracks in beam structures using measurements of natural frequencies', J. of the Franklin Institute, 328, 505-518 https://doi.org/10.1016/0016-0032(91)90023-V
  15. Morassi, A. and Rovere, N. (1997), 'Localizing a notch in a steel frame from frequency measurements', J. Eng. Mech., 123, 422-432 https://doi.org/10.1061/(ASCE)0733-9399(1997)123:5(422)
  16. Murigendrappa, S.M., Maiti, S.K. and Srirangarajan, H.R. (2004), 'Experimental and theoretical study on crack detection in pipes filled with fluid', J. Sound Vib., 270(4-5), 1013-1032 https://doi.org/10.1016/S0022-460X(03)00198-6
  17. Murigendrappa, S.M. (2004), 'Detection of crack in straight and L-shaped pipes filled with fluid based on transverse natural frequencies', Ph.D. Thesis, Department of Mechanical Engineering, Indian Institute of Technology Bombay
  18. Nandwana, B.P. and Maiti, S.K. (1997), 'Modelling of vibration of beam in presence of inclined edge and internal crack for its possible detection based on frequency measurements', Engineering Fracture Mechanics, 58(3), 193-205 https://doi.org/10.1016/S0013-7944(97)00078-7
  19. Narkis, Y. (1994), 'Identification of crack location in vibrating simply supported beam', J. Sound Vib., 172(4), 549-558 https://doi.org/10.1006/jsvi.1994.1195
  20. Nikolakopoulos, P.G, Katsareas, D.E. and Papadopoulos, C.A. (1997), 'Crack identification in frame structures', Comput. Struct., 64(1-4), 389-406 https://doi.org/10.1016/S0045-7949(96)00369-0
  21. Patil, D.P. and Maiti, S.K. (2002), 'An approach for crack detection in beams on elastic foundations using frequency measurements', Int. J. of Acoustics and Vibration, 7, 243-249
  22. Ruotolo, R. and Surace, C. (1997), 'Damage assessment of multiple cracked beams: Numerical results and experimental validation', J. Sound Vib., 206(4), 567-588 https://doi.org/10.1006/jsvi.1997.1109
  23. Saavedra, RN. and Cuitino, L.A. (2001), 'Crack detection and vibration behaviour of cracked beams', Comput. Struct., 79, 1451-1459 https://doi.org/10.1016/S0045-7949(01)00049-9
  24. Salawu, O.S. (1997), 'Detection of structural damage through changes in frequency: A review', Eng. Struct., 19(9), 718-723 https://doi.org/10.1016/S0141-0296(96)00149-6
  25. Shi, Z.Y., Law, S.S. and Zhang, L.M. (1998), 'Structural damage localization from modal strain energy change', J. Sound Vib., 218(5), 825-844 https://doi.org/10.1006/jsvi.1998.1878
  26. Wauer, J. (1990), 'On the dynamics of cracked rotors: A literature survey', Applied Mechanics Review, 43(1), 13-17 https://doi.org/10.1115/1.3119157
  27. Xia, Y. and Hao, H. (2000), 'Measurement selection for vibration-based structural damage identification', J. Sound Vib., 236(1), 89-104 https://doi.org/10.1006/jsvi.2000.2960
  28. Yao GC, Chang K.C. and Lee, GC. (1992), 'Damage diagnosis of steel frames using vibration signature analysis', J. Eng. Mech., 118(9), 1949-1961 https://doi.org/10.1061/(ASCE)0733-9399(1992)118:9(1949)

Cited by

  1. Crack identification in short shafts using wavelet-based element and neural networks vol.33, pp.5, 2005, https://doi.org/10.12989/sem.2009.33.5.543
  2. On crack detection in curved beams using change of natural frequency vol.20, pp.2, 2018, https://doi.org/10.21595/jve.2017.18774