Structural Engineering and Mechanics

  • 제21권2호
  • /
  • Pages.151-168
  • /
  • 2005
  • /
  • 1225-4568(pISSN)
  • /
  • 1598-6217(eISSN)
테크노프레스 (Techno-Press)
권호 표지
DOI QR코드

DOI QR Code

The buckling of rectangular plates with opening using a polynomial method

  • Muhammad, T. (Department of Mechanical and Materials Engineering, The University of Western Ontario) ;
  • Singh, A.V. (Department of Mechanical and Materials Engineering, The University of Western Ontario)
  • 투고 : 2004.02.05
  • 심사 : 2005.07.05
  • 발행 : 2005.09.30
⟨ 이전 논문 다음 논문 ⟩

초록

In this paper an energy method is presented for the linear buckling analysis of first order shear deformable plates. The displacement fields are defined in terms of the shape functions, which correspond to a set of predefined points and are composed of significantly high order polynomials. The locations of these points are found by mapping the geometry using the naturalized coordinates and bilinear shape functions. In order to evaluate the method, fully clamped and simply supported rectangular plates subjected to uniform uniaxial compressive loading on two opposite edges of the plate are investigated thoroughly and the results are compared with the exact solution given in the monograph of Timoshenko and Gere (1961). The method is extended to the analysis of perforated plates, wherein the negative stiffness computed over the opening area from in-plane and out-of-plane deformation modes is superimposed to the stiffness of the full plate. Numerical results are then favorably compared with those obtained by finite element methods. Other cases such as; rectangular plates with eccentrically located openings of different shapes are studied and reported in this paper with regards to the effect of aspect ratio, hole size, and hole position on the buckling. For a square plate with a large circular opening at the center, diameter being 80 percent of the length, the present method yields buckling coefficient 12.5 percent higher than the one from the FEM.

키워드

참고문헌

  1. Belytschko, T., Lu, Y.Y. and Gu, L. (1994), 'Element free Galerkin methods', Int. J. Numer. Meth. Eng., 37, 229-256 https://doi.org/10.1002/nme.1620370205
  2. Belytschko, T., Krongauz, Y., Organ, D., Fleming, M. and Krysl, P. (1996), 'Meshless method: An overview and recent developments', Comput. Methods Appl. Mech. Eng., 139, 3-47 https://doi.org/10.1016/S0045-7825(96)01078-X
  3. Bert, C.W. and Malik, D. (1996), 'Free vibration analysis of thin cylindrical shells by differential quadrature method', J. Pres. Ves. Techn., ASME, 118, 1-12 https://doi.org/10.1115/1.2842156
  4. Bulson, P.S. (1970), The Stability of Flat Plates, Chatto and Windus, London, GB
  5. Chen, X.L., Liu, G.R. and Lim, S.P. (2003), 'An element free Galerkin method for the free vibration analysis of composite laminates of complicated shape', Comput. Struct., 59, 279-289 https://doi.org/10.1016/S0263-8223(02)00034-X
  6. Redekop, D. and Makhoul, E. (2000), 'Use of the differential quadrature method for the buckling analysis of cylindrical shell panels', Struct. Eng. Mech., 10(5), 451-462 https://doi.org/10.12989/sem.2000.10.5.451
  7. El Ouatouati, A. and Johnson, D.A. (1999), 'A new approach for numerical modal analysis using the elementfree method', Int. J. Numer. Meth. Eng., 46, 1-27 https://doi.org/10.1002/(SICI)1097-0207(19990910)46:1<1::AID-NME659>3.0.CO;2-G
  8. I-DEAS Master S$Series^{TM}$, Structural Dynamics Research Corporation, Milford, OH 45150.
  9. EI-Sawy, K.M. and Nazmy, A.S. (2001), 'Effect of aspect ratio on the elastic buckling of uniaxially loaded plates with eccentric holes', Thin-Walled Structures, 39, 983-998 https://doi.org/10.1016/S0263-8231(01)00040-4
  10. Mohr, G.A. (2000), 'Polynomial solution for thin plates', Int. J. Mech. Sci., 42, 1197-1204 https://doi.org/10.1016/S0020-7403(99)00040-5
  11. Muhammad, T. and Singh, A.V. (2003), 'A $\rho -type$ solution for the bending of doubly connected rectangular, circular and elliptic plates', submitted to the Int. J. Solids Struct
  12. Sabir, AB. and Chow, F.Y. (1983), 'Elastic buckling of flat panels containing circular and square holes, instability and plastic collapse of steel structures', Proc. of the Michael R. Home Conf, 311-321
  13. Sabir, A.B. and Chow, F.Y. (1986), 'Elastic buckling of plates containing eccentrically located circular holes', Thin-Walled Structures, 4, 135-149 https://doi.org/10.1016/0263-8231(86)90020-0
  14. Shakerley, T.M. and Brown, C.J. (1996), 'Elastic buckling of plates with eccentrically positioned rectangular perforations', Int. J. Mech. Sci., 38, 825-838 https://doi.org/10.1016/0020-7403(95)00107-7
  15. Suetake, Y. (2002), 'Element free method based on Lagrange Polynomial', J. Eng. Mech., ASCE, 128, 231-239 https://doi.org/10.1061/(ASCE)0733-9399(2002)128:2(231)
  16. Timoshenko, S.P. and Gere, J.M. (1961), Theory of Elastic Stability, McGraw-Hill Book Co., INC., N.Y
  17. Weaver, W. and Johnston, P.R. (1984), Finite Elements for Structural Anarysls, Prentice Hall, Englewood Cliffs, NJ
  18. Yettram, A.L. and Brown, C.J. (1985), 'The elastic stability of square perforated plates', Comput. Struct., 21(6), 1267-1272 https://doi.org/10.1016/0045-7949(85)90180-4
  19. Yettram, A.L. and Brown, C.J. (1986), 'The elastic stability of square perforated plates under bi-axialloading', Comput. Struct., 22(4), 589-594 https://doi.org/10.1016/0045-7949(86)90010-6

피인용 문헌

  1. Eigenvalue analysis of doubly connected plates with different configurations vol.295, pp.1-2, 2006, https://doi.org/10.1016/j.jsv.2005.12.044
  2. Designing and experimental study of compact vibration isolator with quasi-zero stiffness vol.79, pp.4, 2021, https://doi.org/10.12989/sem.2021.79.4.415