Structural Engineering and Mechanics

  • 제21권1호
  • /
  • Pages.1-18
  • /
  • 2005
  • /
  • 1225-4568(pISSN)
  • /
  • 1598-6217(eISSN)
테크노프레스 (Techno-Press)
권호 표지
DOI QR코드

DOI QR Code

Frictional effects on the cyclic response of laterally loaded timber fasteners

  • Allotey, Nii (Department of Civil and Environmental Engineering, The University of Westem Ontario) ;
  • Foschi, Ricardo (Department of Civil Engineering, The University of British Columbia)
  • 투고 : 2004.09.09
  • 심사 : 2005.06.02
  • 발행 : 2005.09.10
⟨ 이전 논문 다음 논문 ⟩

초록

Foschi's connector model is used as a basic component in the development of nonlinear analysis programs for timber structures. This paper presents the extension of the model to include the effect of shaft frictional forces. The wood medium is modeled using the Foschi embedment model, while shaft friction is modeled using an elastic Coulomb-type friction model. The initial confining pressure for the case of driven fasteners is accounted for by a lateral shift of the load-embedment curve. The model is used to compute the cyclic response of both driven and inserted fasteners. The results obtained from the cases studied indicate that initial confining pressure and friction do not have a significant effect on the computed hysteretic response, however, they significantly affect the computed amount of fastener withdrawal. This model is particularly well-suited for modeling the hysteretic response of shear walls with moderate fastener withdrawal under lateral cyclic or earthquake loading.

키워드

참고문헌

  1. Allotey, N.K. (1999), 'A model for the response of single timber fasteners and piles under cyclic and dynamic loading', M.A.Sc. Thesis, University of British Columbia, Vancouver, B.C.
  2. America Forest and Paper Association (AFPA, 1993), National Design Specification for Wood Construction, America Forest and Paper Association, Washington, D.C.
  3. American Society for Testing and Materials (ASTM, 1999a), 'D1761-88 - Standard test methods for mechanical fasteners in wood', 1999 Annual Book of ASTM Standards, Vol. 04.10, ASTM, West Conshohocken, Pennsylvania
  4. American Society for Testing and Materials (ASTM, 1999b), 'D5764-97a - Standard test method for evaluating dowel-bearing strength of wood and wood-based products', 1999 Annual Book of ASTM Standards, Vol. 04.10, ASTM, West Conshohocken, Pennsylvania
  5. American Society for Testing and Materials (2004), 'G115-04 - Standard guide for measuring and reporting friction coefficients', 2004 Annual Book of ASTM Standards, Vol. 04.03, ASTM, West Conshohocken, Pennsylvania
  6. Chui, Y.H., Ni, C. and Jiang, L. (1998), 'Finite element model for nailed wood joints under reversed cyclic load', J. Struct. Engrg., ASCE, 124(1), 96-103 https://doi.org/10.1061/(ASCE)0733-9445(1998)124:1(1)
  7. Chui, Y.H. and Craft, S. (2002), 'Fastener head pull-through of plywood and oriented strand board', Can. J Civ. Engrg., 29, 384-388 https://doi.org/10.1139/l02-019
  8. Durham, J., Lam, F. and Prion, H.G. L. (2001), 'Seismic resistance of wood shear walls with large OSB panels', J. Struct. Engrg., ASCE, 127(12), 1460-1466 https://doi.org/10.1061/(ASCE)0733-9445(2001)127:1(1)
  9. Erki, M.A. (1991), 'Modeling the load-slip behavior of timber joints with mechanical fasteners', Can. J. Civ. Engrg., 18, 607-616 https://doi.org/10.1139/l91-074
  10. Foliente, G. (1995), 'Hysteresis modeling of wood joints and structural systems', J. Struct. Engrg., ASCE, 121(6), 1013-1022 https://doi.org/10.1061/(ASCE)0733-9445(1995)121:1(1)
  11. Folz, B. and Filiatrault, A. (2001), 'Cyclic analysis of wood shear walls', J. Struct. Engrg., ASCE, 127(4), 433-441 https://doi.org/10.1061/(ASCE)0733-9445(2001)127:1(1)
  12. Foschi, R.O. (1974), 'Load-slip characteristics of nails', Wood Sci., 7, 69-74
  13. Foschi, R.O. and Bonae, T. (1977), 'Load-slip characteristics for connections with common nails', Wood Sci., 9, 118-123
  14. Foschi, R.O. (2000), 'Modeling the hysteretic response of mechanical connections for wood structures', Proc. 6th World Conf. Timber Engrg., University of British Columbia, Vancouver, B.C.
  15. Foschi, R.O., Yao, F. and Rogerson, D. (2000a), 'Determining embedment response parameters from connector tests', Proc. 6th World Conf. Timber Engrg., University of British Columbia, Vancouver, B.C.
  16. Foschi, R.O., Ventura, C., Lam, F. and Prion, H.G.L. (2000b), 'Reliability and design of innovative wood structures under earthquake and extreme wind conditions', FRBC Research Project Report, Department of Civil Engineering, University of British Columbia, Vancouver, B.C., online (www.civil.ubc.ca/FRBC)
  17. Guan, Z.W. and Rodd, P.D. (2000), 'Three-dimensional finite element model for locally reinforced timber joints made with hollow dowel fasteners', Can. J. Civ. Engrg., 27, 785-797 https://doi.org/10.1139/cjce-27-4-785
  18. Gu, J. and Lam, F. (2004), 'Simplified mechanics-based wood frame shear wall model', 13th World Conf. Earthquake Engineering, Vancouver, B.C., Paper No. 3109
  19. He, M., Magnusson, H., Lam, F. and Prion, H.G.L. (1999), 'Cyclic performance of perforated wood shear walls with oversize OSB panels', J. Struct. Engrg., ASCE, 125(1), 10-18 https://doi.org/10.1061/(ASCE)0733-9445(1999)125:1(1)
  20. He, M., Lam, F. and Foschi, R.O. (2001), 'Modeling three-dimensional timber light-frame buildings', J. Struct. Engrg., ASCE, 127(8), 901-913 https://doi.org/10.1061/(ASCE)0733-9445(2001)127:1(1)
  21. Lam, F., Filialtraut, A., Kawai, N., Nakajima, S. and Yamaguchi, N. (2004), 'Performance of timber buildings under seismic load: Part 2: Modeling', Prog. Struct. Engrg. Mater., 6, 79-83 https://doi.org/10.1002/pse.175
  22. Moses, D.M. (2000), 'Constitutive and analytical modeling of structural composite lumber with applications in bolted connections', Ph.D. Thesis, University of British Columbia, Vancouver, B.C.
  23. Nishiyama, N. and Ando, N. (2003), 'Analysis of load-slip characteristics of nailed wood joints: Application of a two-dimensional geometric nonlinear analysis', J. Wood Sci., Japan Wood Research Society, 49, 505-512
  24. Oden, J.T. and Pires, E.B. (1984), 'Algorithms and numerical results for finite element approximations of contact problems with non-classical friction laws', Comp. Struct., 19, 137-147 https://doi.org/10.1016/0045-7949(84)90212-8
  25. Oden, J.T. and Pires, E.B. (1983), 'Nonlocal and nonlinear friction laws and variational principles for contact problems in elasticity', J. App. Mech., 16, 67-75
  26. Rammer, D.R., Winistofer, S.G and Bender, D.A. (2001), 'Withdrawal strength of threaded nails', J. Struct. Engrg., ASCE, 127(4), 442-449 https://doi.org/10.1061/(ASCE)0733-9445(2001)127:1(1)
  27. Rodd, P.D. (1988), 'Timber joints made with improved circular dowel fasteners', Proc. 1st Int. Conf. Timber Engrg., Seattle, WA., 1, 26-37
  28. Rodd, P.D., Guan, Z.W. and Pope, D.J. (2000), 'Measurement and rationalization of fastener embedment data', Proc. 6th World Conf. Timber Engrg., University of British Columbia, Vancouver, B.C.
  29. Schreyer, A.C., Lam, F. and Prion, H.G.L. (2004), 'Comparison of slender dowel-type fasteners for slotted in steel plate connections under monotonic and cyclic loading', Proc. 7th World Conf. Timber Engrg., Finish Association of Civil Engineers, Helsinki, Finland
  30. Smart, J.V. (2002), 'Capacity resistance and performance of single-shear bolted and nailed connections: an experimental investigation', M.Sc. Thesis, Virginia Polytechnic Institute and State University, Blacksburg, Virginia
  31. Smith, I. (1983), 'Short-term load deformation relationships for timber joints with dowel-type connectors', Ph.D. Thesis, Polytechnic of the South Bank, CNAA
  32. Sutt, E., Reinhold, T. and Rosowsky, D. (2000), 'The effect of in-situ conditions on withdrawal capacities', Proc. 6th World Conf. Timber Engrg., University of British Columbia, Vancouver, B.C.
  33. U.S. Forest Products Laboratory (UFPA 1974), Wood Handbook: Wood as an Engineering Material, USDA Agricultural Handbook, 72
  34. Wilkinson, T.L. and Rowlands, R.E. (1981), 'Analysis of mechanical joints in wood', Exp. Mech., 21, 408-441 https://doi.org/10.1007/BF02325922
  35. Wolf, T. (2000), 'Determination of transverse bending stiffness of nail-laminated timber elements', Proc. 6th World Conf. Timber Engrg., University of British Columbia, Vancouver, B.C.
  36. Wong, E. (1999), 'Verification of an analytical hysteresis model for dowel-type timber connections using shake table tests', M.A.Sc. Thesis, University of British Columbia, Vancouver, B.C.

피인용 문헌

  1. Evaluation of Friction Properties According to Normal Force and Direction of Wood Grain in Real Contact Area vol.39, pp.5, 2011, https://doi.org/10.5658/WOOD.2011.39.5.437
  2. Timber-FRP composite beam subjected to negative bending vol.73, pp.3, 2005, https://doi.org/10.12989/sem.2020.73.3.353