Structural Engineering and Mechanics

  • 제19권5호
  • /
  • Pages.581-602
  • /
  • 2005
  • /
  • 1225-4568(pISSN)
  • /
  • 1598-6217(eISSN)
테크노프레스 (Techno-Press)
권호 표지
DOI QR코드

DOI QR Code

Experimental investigation of local damage in high strength concrete columns using a shaking table

  • Bairrao, Rogerio (Structures Department, National Laboratory for Civil Engineering) ;
  • Kacianauskas, Rimantas (Department Strength of Materials, Vilnius Gediminas Technical University) ;
  • Kliukas, Romualdas (Department Strength of Materials, Vilnius Gediminas Technical University)
  • 투고 : 2004.02.05
  • 심사 : 2004.11.09
  • 발행 : 2005.03.30
⟨ 이전 논문 다음 논문 ⟩

초록

In this paper the accumulation of local damage during the cyclic loading in reinforced high-strength concrete columns is experimentally investigated. Two identical column specimens with annular cross-section and spiral reinforcement were designed and two tests, up to failure, under the action of a constant vertical concentrated force and a time-dependent concentrated horizontal force, were carried out at the LNEC shaking tables facility. Sine type signals, controlled in amplitude, frequency and time duration were used for these experiments. The concept of local damage based on local stiffness degradation is considered in detail and illustrated by experimental results. The specimens were designed and reinforced in such a way that the accumulation of damage was predicted by dominating deformations (cracking and crushing of the concrete) while the increasing of the loading values was a dominating factor of damage. It was observed that the local damage of HSC columns has exposed their anisotropic local behaviour. The damage accumulation was slightly different from the expected in accordance with the continuum damage concept, and a partial random character was observed.

키워드

참고문헌

  1. Aitcin, P.C. (1992), 'L'emploi des fluidifiants dans les BHP', Les betons a hautes performances. Caracterisation, durabilite, applications, Y. Malier (ed.), Presses Ponts et chaussees, Paris, 45-64
  2. BAEL91 (2000), Regulations for Conception, Calculation and Design of Reinforced Concrete Structures (revised 99, DTVP 13-702), Paris (in French)
  3. Bairrao, R., Kacianauskas, R. and Kliukas, R. (2003), 'Damage of high strength reinforced concrete columns under horizontal and vertical loading', Civil Engineering and Management, 9(3), 163-171 https://doi.org/10.1080/13923730.2003.10531322
  4. Bairrao, R., Kacianauskas, R. and Kliukas, R. (2003), 'Local damage experimental research of high-strength concrete columns', Proc. of fib-Symposium Concrete Structures in Seismic Regions, Athens, Greece, May
  5. Bairrao, R., Duarte, R., Vaz, C. and Costa, A. (1995), 'Portuguese methodology for the earthquake design of important structures', Proc. of the Second Int. Conf. on Seismology and Erathquake Engineering, Teheran, Iran, May
  6. Chung, D.D.L. (2002), 'Improving cement-based materials using silica fume', J. Mater. Sci., 37(4), 673-682 https://doi.org/10.1023/A:1013889725971
  7. Conte, J.P. and Trombetti, T.L. (2000), 'Linear dynamic modeling of a uniaxial servo-hydraulic shaking table system', Earthq. Eng. Struct. Dyn., 29(9), 1375-1404 https://doi.org/10.1002/1096-9845(200009)29:9<1375::AID-EQE975>3.0.CO;2-3
  8. Crewe, A.J. and Severn, R.T. (2001), 'The European collaborative programme on evaluating the performance of shaking tables', Philosophical Transactions of the Royal Society of London. Series A-Mathematical, Physical and Engineering Sciences, 59(1786), 1671-1696
  9. Dong, Z. and Kern, W. (2001), 'Fracture properties of high-strength concrete', J. Mater. Civil Eng., 13(1), 86-88 https://doi.org/10.1061/(ASCE)0899-1561(2001)13:1(86)
  10. Duarte, R.T. (1994), 'Development of shaking table testing techniques', Report of Working Group 11, 10th European Conf. on Earthquake Engineering, Vienna, Austria, August/September
  11. Emilio, F.T., Duarte, R.T., Carvalhal, F.J., Costa, C.O., Vaz, C.T. and Correa, M.R. (1989), 'The new LNEC shaking table for earthquake resistance testing', Document LNEC-757
  12. FIP/CEP. (1990), 'High strength concrete, State of the Art Report, SR 90/1', Bulletin Dinformation, 197
  13. Flaga, K. (2000), 'Advances in materials applied in civil engineering', J. Mater. Proc. Tech., 106, 173-183 https://doi.org/10.1016/S0924-0136(00)00611-7
  14. Foster, S.J. (2001), 'On behavior of high-strength concrete columns: Cover spalling, steel fibers, and ductility', ACI Struct. J., 98(4), 583-589
  15. Hanganu, A.D., Onate, E. and Barbat, A.H. (2002), 'A finite element methodology for local/global damage evolution in civil engineering structures', Comput. Struct., 80(20-21), 1667-1687 https://doi.org/10.1016/S0045-7949(02)00012-3
  16. Heikal, M. and El-Didamony, H. (2000), 'Effect of some superplasticizers on the properties of silica fume blended cement pastes', Silicates Industriels, 65(11-12), 125-130
  17. Kachanov, L.M. (1958), 'On the creep fracture time', Izv. AN SSSR, 8, 26-31 (in Russian)
  18. Khan, A.R., Al-Gadib, A.H. and Baluch, M.H. (1998), 'An elasto damage constitutive model for high-strength concrete', R. de Borst (ed.), etc., Computational Modeling of Concrete Structures, 1, Balkema, Roterdam, 133-142
  19. Kmita, A. (2000), 'A new generation of concrete in civil engineering', J. Mater. Proc. Tech., 106, 80-86 https://doi.org/10.1016/S0924-0136(00)00642-7
  20. Labuz, F.J., Cattaneo, S. and Chen, L.H. (2001), 'Acoustic emission at failure in quasi-brittle materials', Constrution and Building Materials, 15, 225-233 https://doi.org/10.1016/S0950-0618(00)00072-6
  21. de Larrard, F. (1992), 'Particules ultrafines pour l'eleboration des BTHP', Les betons a hautes performances. Caracterisation, durabilite, applications, Y. Malier (ed.), Presses Ponts et Chaussees, Paris, 65-78
  22. de Larrard, F. and Puch, C. (1992), 'Formulation des BHP: la methode des coulis', Les betons a hautes performances Caracterisation. durabilite, applications, Y. Malier (ed.), Presses Ponts et Chaussees, Paris, 7994
  23. Lee, D.H. and Elnashai, A.S. (2002), 'Inelastic seismic analysis of RC bridge piers including flexure-shear-axial interaction', Struct. Eng. Mech., 13(3), 241-260 https://doi.org/10.12989/sem.2002.13.3.241
  24. Lemaitre, J. and Lipman, H. (1996), Course of Damage Mechanics, Springer, New-York
  25. Li, Q., Zhang, L. and Ansari, F. (2002), 'Damage constitutive for high strength concrete in triaxial cyclic compression', Int. J. Solids Struct., 39, 4013-4025 https://doi.org/10.1016/S0020-7683(02)00265-2
  26. Lu, X. (1995), 'Application of identification methodology to shaking table tests on reinforced concrete columns', Eng. Struct., 17(7), 505-511 https://doi.org/10.1016/0141-0296(95)00053-A
  27. Malier, Y. (1992), 'L'utilisation du BHP dans une approche 'systeme' de la construction', Les betons ahautes performances. Caracterisation. durabilite, applications, Y. Malier (ed.), Presses Ponts et chaussees, Paris, 324
  28. Manfredi, G. and Pecce, M. (1997), 'Low cycle fatigue of RC beams in NSC and HSC', Eng. Struct., 19(3), 217-223 https://doi.org/10.1016/S0141-0296(96)00081-8
  29. Minowa, C., Ogawa, N., Hayashida, T., Kogoma, I. and Okada, T. (1995), 'Dynamic and static collapse tests of reinforced concrete columns', Nuclear Engineering and Design, 156, 269-276 https://doi.org/10.1016/0029-5493(94)00968-5
  30. Murakami, S. and Karniya, K. (1997), 'Constitutive and damage evolution equations of elastic-brittle materials based on irreversible thermodynamics', Int. J. Mech. Sci., 39(4), 473-486 https://doi.org/10.1016/S0020-7403(97)87627-8
  31. Ogawa, N., Ohtani, K., Katayama, T. and Shibata, H. (2001), 'Construction of a three-dimensional, large-scale shaking table and development of core technology', Philosophical Transactions of the Royal Society of London. Series A - Mathematical. Physical and Engineering Sciences, 59(1786), 1725-1751
  32. Papa, E. and Taliercio, A. (1996), 'Anisotropic damage model for the multiaxial static and fatigue behaviour of plain concrete', Engng. Fracture Mech., 55(2), 163-179 https://doi.org/10.1016/0013-7944(96)00004-5
  33. Paultre, P., Legeron, F. and Mongeau, D. (2001), 'Influence of concrete strength and transverse reinforcement yield strength on behavior of high-strength concrete columns', ACI Struct. J., 98(4), 490-501
  34. Suanno, R. and Ramm, E. (1994), 'Analysis of three-dimensional reinforced concrete structures with coupling of plasticity and damage theories', Bazant Z.P. (ed.), etc., Fracture and damage in quasi-brittle structures, E&FN Spon, London, 519-532
  35. Vadliiga, R., Kliukas, R. and Kudzys, A. (2000), 'Influence of chemical additions on durability of vibrated and spun concrete under freezing and aggressive environment', Fifth CANMET/ACI Int. Conf on Durability of Concrete, Barcelona, Spain, June, 403-412
  36. Zhu, R., Li, L. and Wang D. (2003), 'Damage assessment in periodic structures from measured natural frequencies by a sensitivity and transfer matrix-based method', Struct. Eng. Mech., 16(1), 17-34 https://doi.org/10.12989/sem.2003.16.1.017

피인용 문헌

  1. Performance of HSC columns under severe cyclic loading vol.13, pp.2, 2015, https://doi.org/10.1007/s10518-014-9617-x