Structural Engineering and Mechanics

Techno-Press (테크노프레스)
권호 표지
DOI QR코드

DOI QR Code

Finite element vibration and damping analysis of a partially covered cantilever beam

  • Yaman, Mustafa (Department of Mechanical Engineering, Ataturk University)
  • Received : 2004.02.19
  • Accepted : 2004.09.15
  • Published : 2005.01.30
⟨ Previous Next ⟩

Abstract

There are several ways of decreasing the vibration energy of structures. One of which is special damping layers made of various viscoelastic materials are widely applied in structures subjected to dynamic loading. In this study, a cantilever beam, partially covered by damping a constraining layers, is investigated by using Finite Element method (FEM). The frequency and system loss factor are evaluated. The effects of different physical and geometrical parameters on the natural frequency and system loss factors are discussed.

Keywords

References

  1. Bathe, K.J. (1996), Finite Element Procedure, Prentice-Hall, New Jersey
  2. Baz, A. and Ro, J. (2001), 'Vibration control of rotating beams with active constrained layer damping', Smart Materials and Structures, 10, 112-120 https://doi.org/10.1088/0964-1726/10/1/311
  3. Chen, Q. and Levy, C. (1994), 'Vibration analysis of the partially covered double sandwich-type cantilever beam with concentrated mass at the free end', J. Sound Vib., 31(17), 2377-2391
  4. Hajela, P. and Lin, C.Y. (1991), 'Optimal design for viscoelastically damped beam structures', Applied Mechanics Reviews, 44, 96-106 https://doi.org/10.1115/1.3121378
  5. Lall, A.K., Asnani, N.T. and Nakra, B.C. (1988), 'Damping analysis of partially covered sandwich beams', J. Sound Vib., 123(2), 247-259 https://doi.org/10.1016/S0022-460X(88)80109-3
  6. Levy, C. and Chen, Q. (1994), 'Vibration analysis of the partially covered double sandwich-type cantilever beam', J. Sound Vib., 177(1), 15-29 https://doi.org/10.1006/jsvi.1994.1413
  7. Lin, C.Y. and Chen, L.W. (2003), 'Dynamic stability of a rotating beam with a constrained damping layer', J. Sound Vib., 267, 209-225 https://doi.org/10.1016/S0022-460X(02)01427-X
  8. Marcelin, J.L., Trompette, P.H. and Smati, A. (1992), 'Optimal constrained layer damping with partial coverage', Finite Elements in Analysis and Design, 12,273-280 https://doi.org/10.1016/0168-874X(92)90037-D
  9. MATLAB 6.0 Release 13, (2002)
  10. Nashif, A.D., Jones, D.I.G. and Henderson, J.P. (1985), Vibration Damping, A Wiley-lnterscience Publication, Canada
  11. Rikards, R., Chate, A. and Barkanov, E. (1993), 'Finite element analysis of damping the vibrations of laminated composites', Comput. Struct., 47(6),1005-1015 https://doi.org/10.1016/0045-7949(93)90305-W
  12. Shi, Y, Hua, H. and Sol, H. (2004), 'The finite element analysis and experimental study of beams with active constrained layer damping treatments', J. Sound Vib., 278(1-2), 343-363 https://doi.org/10.1016/j.jsv.2004.06.002
  13. Sisemore, C.L. and Darvennes, C.M. (2002), 'Transverse vibration of elastic - viscoelastic - elastic sandwich beams: Compression experimental and analytical study', J. Sound Vib., 252(1), 155-167 https://doi.org/10.1006/jsvi.2001.4038
  14. Sun, D. and Tong, L. (2002), 'Modelling and vibration control of beams with partially debonded active constrained layer damping patch', J. Sound Vib., 252(3),493-507 https://doi.org/10.1006/jsvi.2001.4033
  15. Teng, T.L. and Hu, N.K., (2001), 'Analysis of damping characteristics for viscoelastic laminated beams', Comput. Methods Appl. Mech. Engrg., 190,3881-3892 https://doi.org/10.1016/S0045-7825(00)00305-4

Cited by

  1. Effects of partial constrained viscoelastic layer damping parameters on the initial transient response of impacted cantilever beams: Experimental and numerical results vol.321, pp.1-2, 2009, https://doi.org/10.1016/j.jsv.2008.09.039
  2. Numerical modeling for cantilever sandwich smart structures with partially covered constrained viscoelastic layer vol.281, pp.None, 2005, https://doi.org/10.1016/j.compstruct.2021.114981