Evaluation of Maintenance Coating Materials for Steel Bridges

  • Lee, Chan-Young (Materials and Environment Research Division, Highway and Transportation Technology Institute, Korea Highway Corporation) ;
  • Cheong, Haimoon (Materials and Environment Research Division, Highway and Transportation Technology Institute, Korea Highway Corporation) ;
  • Kim, Ok-Sun (Materials and Environment Research Division, Highway and Transportation Technology Institute, Korea Highway Corporation)
  • Published : 2005.10.01

Abstract

Coating performance of various coating systems including chlorinated rubber and epoxy/urethane used most for steel structures of highway in Korea, was evaluated by exposing test specimen to complex deterioration factors such as ultraviolet ray, moisture, freeze-thaw cycle and salt. Deteriorated specimens were evaluated by chalking and rust grades according to ASTM, and measurement of color differences and adhesion. In overall coating performances such as corrosion resistance, photochemical stability, and adhesion, ceramic/ urethane, moisture-curable urethane/ urethane, etc. were superior. As for other coating materials tested in this study, superior materials against certain deterioration factors may be inferior against other factors. Accordingly, in order to select suitable maintenance coating materials for the use, it is thought that investigation of suitability through experiment should precede selection of materials, especially for unusual coatings or paints.

Keywords

References

  1. Standard Test Methods for Evaluation the Degree of 210 Chalking of Exterior Paint Films, ASTM D 4214-98 (1998)
  2. Standard Test Methods for Evaluation the Degree of Rusting on Painted Steel Surfaces, ASTM D 610-95 (1995)
  3. Standard Test Method for Calculation of Color Differences From Instrumentally Measured Color Coordinates, ASTM D 2244-93 (1993)
  4. Standard Practice for Identification of Instrumental Methods of Color or Color-Difference Measurement of Materials, ASTM E 805-94 (1994)
  5. Standard Test Method for Color or Color-Difference Measurement by Tristimulus (Filter) Colorimetry, ASTM E 1347-97 (1997)
  6. Standard Test Method for Pull-Off Strength of Coatings Using Portable Adhesion Testers, ASTM D 4541-95 (1995)
  7. C. G. Munger and L. D. Vincent, Corrosion Protection by Protective Coatings, p.340, 1999
  8. C. H. Hare, Protective Coatings, p.464, 1994