Tribology and Lubricants

  • 제21권1호
  • /
  • Pages.39-45
  • /
  • 2005
  • /
  • 2713-8011(pISSN)
  • /
  • 2713-802X(eISSN)
한국트라이볼로지학회 (Korean Tribology Society)
권호 표지
DOI QR코드

DOI QR Code

크랭크 핀의 질량관성을 고려한 엔진 베어링의 틈새 거동 연구

Study on the Dynamic Behaviors of Engine Bearing with the Inertia Effect of Crank Pin Journal

  • 장시열 (국민대학교 기계자동차공학부)
  • Jang Siyoul (School of Mechanical and Automotive Engineering, Kookmin University)
  • 발행 : 2005.02.01
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

Investigation of the mass effect on the journal traces in the clearance of engine bearing has been performed for better design of mass distribution of crank system components such as crank pin, piston, con-rod, balance weight, crank throw weight, etc. as well as for better oil reaction behaviors to the applied forces from the cylinder pressures on the bearing. In this preliminary study, crank pin traces in the engine bearing clearance are computed by varying the equivalent magnitude of crank pin mass that includes the masses of crank pin, piston, con-rod. etc.. while most previous studies regarding journal traces in the bearing clearance neglect the inertia effects of crank pin mass. Although the inertia effect of pill mass is negligibly small compared to viscous force by ${\pi}bearing$ theory, it is found that it gives a great amount of influences on the journal traces in full bearing computation $(2\pi\;bearing\;theory)$ under the dynamic loading conditions.

키워드

참고문헌

  1. Xu, H., 'Recent Advances in Engine Bearing Design Analysis,' Journal of Engineering Tribology, Vol. 213, pp. 239-251, 1999 https://doi.org/10.1243/1350650991542631
  2. Hirani, H., Athre, K. and Biswas, S., 'Comprehensive Design Methodology for an Engine Journal Bearing,' Journal of Engineering Tribology, Vol. 214, pp. 401-412, 2000 https://doi.org/10.1243/1350650001543287
  3. Boedo, S. and Booker, J., 'Transient Dynamics of Engine Bearing Systems,' Tribological Design of Mechanical Elements, Edited by Dowson, D., Taylor, C. M., Godet, M., Berthe, D., Tribology Series 14, 1989
  4. Righes, G., Garro, A. and Calderale, P. M., 'Interdisciplinary Structural and tribological Analysis in High Performance Engines: The case of Con Rod-Pi-Piston System,' The Second World Tribology Congress, Vienna, Austria, 2002
  5. Booker, J. F., 'Analysis of Dynamically Loaded Journal Bearings: The squeeze Film Considering Cavitation,' Ph.D. thesis, Cornell University, 1961
  6. Clayton, G. A., 'Engine Bearing Analysis and Design,' Ph.D. thesis, The University of Leeds, 1990
  7. Paranjpe, R. and Goenka, P., 'Analysis of Crankshaft Bearings Using a Mass Conserving Algorithm,' Tribology Transactions, Vol. 33, pp. 333-344, 1990 https://doi.org/10.1080/10402009008981963
  8. Cho, M., Han, D. and Choi, J., 'Oil Film Thickness in Engine Connecting-Rod Bearing with Consideration of Thermal Effects: Comparison between Theory and Experiment,' Journal of Tribology, Vol. 121, pp. 901-907, 1999 https://doi.org/10.1115/1.2834153
  9. Bonneau, D., Guines, D., Frene, J. and Toplosky, J., 'EHD Analysis, Including Structural Inertia Effects and a Mass-Conserving Cavitation Model,' Journal of Tribology, Vol. 117, pp540-547w, 1995 https://doi.org/10.1115/1.2831288
  10. Cho, M., Han, D. and Choi, J., 'Oil Film Thickness in Engine Connecting-Rod Bearing with Consideration of Thermal Effects: Comparison between Theory and Experiment,' Journal of Tribology, Vol. 121, pp. 901-907, 1999 https://doi.org/10.1115/1.2834153
  11. Bonneau, D., Guines, D., Frene, J. and Toplosky, J., 'EHD Analysis, Including Structural Inertia Effects and a Mass-Conserving Cavitation Model,' Journal of Tribology, Vol. 117, pp. 540-547w, 1995 https://doi.org/10.1115/1.2831288
  12. Paranjpe, R., 'Analysis of Non-Newtonian Effects in Dynamically Loaded Finite Journal Bearings including Mass Conserving Cavitation,' Journal of Tribology, Vol. 114, pp. 736-746, 1992 https://doi.org/10.1115/1.2920943
  13. Taylor, C. M., Engine Tribology, ISBN 0444897550, Elsevier, 1993