References
- R. K Singh and R. Bajaj, 'Advances in chemical mechanical planarization', MRS Bulletin, Vol. 27, No. 10, p. 743, 2002
- R. K Singh, S.-M. Lee, K-S. Choi, G. B. Basim, W. Choi, Z. Chen, and B. M. Moudgil, 'Fundamentals of slurry design for CMP of metal and dielectric materials', MRS Bulletin, Vol. 27, No. 10, p, 752, 2002
- D. Boning and B. Lee, 'Nanotopography issues in shallow trench isolation CMP', MRS Bulletin, Vol. 27, No. 10, p. 761, 2002
- R. Komanduri, N. Chandrasekarna, and L. M. Raff, 'M. D. simulation of nanometric cutting of single crystal aluminum-effect of crystal orientation and direction of cutting', Wear, Vol. 242, No. 1-2, p. 60, 2000 https://doi.org/10.1016/S0043-1648(00)00399-9
- R. Komanduri, N. Chandrasekama, and L. M. Raff, 'MD simulation of exit failure in nanometric cutting', Mater. Sci. Eng. A, Vol. 311, No. 1-2, p. 1, 2001 https://doi.org/10.1016/S0921-5093(01)00960-1
- R. Komanduri and L. M. Raff, 'A review on the molecular dynamics (MD) simulation of machining', Proc. of the I. Mech. E. (Lon) B, Vol. 215, p. 1639, 2001
- T. H. Fang, S. R. Jian, and D. S. Chuu, 'Molecular dynamics annalysis of effects of velocity and loading on the nano indentation', Jap. J. Appl, Phys., Vol. 41, No. 11B, p. L1328, 2002
- T. H. Fang, C. I. Weng, and J. G. Chang, 'Molecular dynamics simulation of nanolithography process using atomic force microscopy', Surf. Sci., Vol. 501, No. 1-2, p. 138, 2002 https://doi.org/10.1016/S0039-6028(01)02023-4
- T. H. Fang and C. I. Weng, 'Three-dimensional molecular dynamics analysis of processing using a pin tool on the atomic scale', Nanotechnology, Vol. 11, No.3, p. 148, 2000
- T. Yokosuka, H. Kurokawa, S. Takami, M. Kubo, A. Miyamoto, and A. Imanura, 'Development of new tight-binding molecular dynamics program to simulate chemical-mechanical polishing processes', Jap. J. Appl, Phys., Vol. 41, No. 4B, p. 2410, 2002
- D. Feichtinger, P. M. Derlet, and H. Van Swygenhoven, 'Atomistic simulations of spherical indentations In nanocrystalline gold', Phys, Rev. B, Vol. 67, No.2, p. 024113, 2003
- Y. Ye, R. Biswas, A. Bastawros, and A. Chandra, 'Simulation of chemical mechanical planarization of copper with molecular dynamics', Appl. Phys, Lett., Vol. 81, No. 10, p. 1875, 2002 https://doi.org/10.1063/1.1507611
- Y. Ye, R. Biswas, J. R. Morris, A. Bastawros, and A. Chandra, 'Molecular dynamics simulation of nanoscale machining of copper', Nanotechnology, Vol. 14, No.3, p. 390, 2003
- J. D. Kim and C. H. Moon, 'A study on microcutting for the configuration of tools using molecular dynamics', J. Mater. Proc. Tech., Vol. 59, No.4, p. 309, 1996
- L. Zhang and H. Tanaka, 'Towards. a deeper understanding of wear and friction on the atomic scale-a molecular dynamics analysis', Wear, Vol. 211, No.1, p. 44, 1997
- L. Zhang and H. Tanaka, 'Atomic scale deformation in silicon monocrystals induced by two-body and three-body contact sliding', Tribology Int., Vol. 31, No.8, p. 425, 1998
- T. Nozaki, M. Doyama, Y. Kogure, and T. Yokotsuka, 'Micromachining of pure silicon by molecular dynamics'. Thin Solid Films, Vol. 334, No. 1-2, p, 221, 1998 https://doi.org/10.1016/S0040-6090(98)01105-5
- M. Doyama, T. Nozaki, and Y. Kogure, 'Cutting, compression and shear of silicon small single crystals', Nucl. Instru. Meth. Phys, B, Vol. 153, No. 1-4, p. 147, 1999 https://doi.org/10.1016/S0168-583X(98)00981-1
- M. Doyama, T. Nozaki, Y. Kogure, and T. Yokotsuka, 'Plastic deformation of pure silicon nanocrystals by molecular dynamics', Nanostructured Mater., Vol. 12, No. 1-4, p. 333, 1999 https://doi.org/10.1016/S0965-9773(99)00055-0
- M. P. Allen and D. J. Tildesley, 'Computer Simulation of Liquids', Oxford, Clarendon, p. 81, 1987