References
- Beidl, C. V., Gill, D. W., Cartellieri, W. and Rust, A., 1998, 'Impact of Emissions and Fuel Economy Requirements on Fuel Injection System and Noise of HD Diesel Engines,' SAE Paper 980176
- Bianchi, G. M., Pelloni, P., Filicori, F. and Vannini, G., 2000, 'Optimization of the Solenoid Valve Behavior in Common-Rail Injection Systems,' SAE Paper 2000-01-2042
- Bianchi, G. M., Falfari, S., Parotto, M. and Osbat, G., 2003, 'Advanced Modeling of Common Rail Injectior Dynamics and Comparison with Experiments,' SAE Paper 2003-01-0006
- Boehner, W. and Hummel, K., 1997, 'Common Rail Injection System for Commercial Diesel Vehicles,' SAE Paper 970345
- Chang, C. T. and Farrell, P. V., 1997, 'Effects of Fuel Viscosity and Nozzle on High Injection Pressure Diesel Spray Characteristics,' SAE Paper 970353
- Coldren, D. R. and Moncelle, M. E., 1997, 'Advanced Technology Fuel System for Heavy Duty Diesel Engines,' SAE Paper 973182
- Erlach, H., Chmela, F., Cartellieri, W. and Herzog, P. L., 1995, 'Pressure Modulated Injection and Its Effect on Combustion and Emissions of a HD Diesel Engine,' SAE Paper 952059
- European Patent, 1993, No. 0 426 205
- Fettes, C. and Leipertz, A., 2001, 'Potential of a Piezo-Driven Passenger Car Common Rail System to Meet Future Emission Legislations-An Evaluation by Means of In-Cylinder Analysis of Injection and Combustion,' SAE Paper 2001-01-3499
- Flaig, U., Polach, W. and Ziegler, G., 1999, 'Common Rail System for Passenger Car DI Diesel Engines; Experience with Application for Series Production Projects,' SAE Paper 199901-0191
- Follansbee, P. S., 2002, Instruction Guide of Diesel Piezo-Injector Controller. The ScienLab Electronic Systems, DICU200/20CA, 1-9
- Ganser, M. A., 1998, 'Common Rail Injector with Injection Rate Control,' SAE Paper 981927
- Gill, D. W. and Herzog, P. L., 1993, 'Fuel Injection Equipment Requirements for Low-Emission DI Diesel Engines,' SAE Paper 933373
- Kohketsu, S., Tanabe, K. and Mori, K., 2000, 'Flexibly Controlled Injection Rate Shape with Next Generation Common Rail System for Heavy Duty DI Diesel Engines,' SAE Paper 2000-01-0705
- Kunkulagunta, K. R., 2000, 'Video Imaging and Analysis of Common Rail Sprays in an Optical Engine Using Shadowgraphy Technique,' SAE 2000-01-1255
- Lee, J. W., 2003, 'Design and Development of Common-Rail Injection System for Next generation,' Annual Report of Korea Institute of Machinery and Materials
- Lee, J. W., Bae, J. W., Kim, H. N., Kang, K. Y. and Min, K. D., 2004, 'Effect of Injection Hole and Needle-driven Characteristics on Pilot Spray in High Pressure Injector with Common-rail system,' Transaction of Liquid Atomization and Spray Systems-Korea, Vol. 9, No. 1, pp. 8-14.
- Manfred, D., Helmut, E. and Peter, F., 1994, 'Preinjection a Measure to Optimize the Emission Behavior of DI Diesel Engine,' SAE Paper 940674
- Morita, K., 2003, 'Automotive Power Source in 21st Century,' JSAE Review, Vol. 24, pp. 1-5 https://doi.org/10.1016/S0389-4304(02)00250-3
- Payri, R., Molina, S., Salvador, F. J. and Gimeno, J., 2004, 'A Study of the Relation Between Nozzle Geometry, Internal Flow and Sprays Characteristics in Diesel fuel Injection Systems,' KSME International Journal, Vol. 18, No. 7, pp. 1222-1235
- Renner, G., Koyannagi, K. and Maly, R. R., 1998, 'Effect of Common Rail Injector Design in the Emission Characteristics of Passenger Car DI Engines,' The 4th International Symposium COMODIA 98, pp. 477-482
- Tanaka, H., Sato, Y. and Urai, T., 2001, 'Development of a Common-Rail Proportional Injector Controlled by a Tandem Arrayed Giant-Magnetostrictive-Actuator,' SAE Paper 2001-01-3182
- Taylor, C. and Washington, G., 2003, 'The Application of Piezoceramic Actuation to Direct Fuel Injection,' SAE Paper 2003-32-0001