한국분말재료학회지 (Journal of Powder Materials)

  • 제12권4호
  • /
  • Pages.273-278
  • /
  • 2005
  • /
  • 2799-8525(pISSN)
  • /
  • 2799-8681(eISSN)
한국분말재료학회 (*구 분말야금학회) (The Korean Powder Metallurgy & Materials Institute)
권호 표지
DOI QR코드

DOI QR Code

기계화학반응에 의한 TiN/TiB2/Ti-silicides 나노복합분말의 합성과 반응기구

Synthesis of TiN/TiB2/Ti-silicides Nanocomposite Powders by Mechanochemical Reaction and its Reaction Mechanism

  • 조영환 (나노재료연구센터, 한국과학기술연구원) ;
  • 김지우 (나노재료연구센터, 한국과학기술연구원) ;
  • 심재혁 (나노재료연구센터, 한국과학기술연구원) ;
  • 안재평 (나노재료연구센터, 한국과학기술연구원) ;
  • 오규환 (재료공학부, 서울대학교)
  • Cho Young-Whan (Nano-Materials Research Center, Korea Institute of Science and Technology) ;
  • Kim Ji-Woo (Nano-Materials Research Center, Korea Institute of Science and Technology) ;
  • Shim Jae-Hyeok (Nano-Materials Research Center, Korea Institute of Science and Technology) ;
  • Ahn Jae-Pyoung (Nano-Materials Research Center, Korea Institute of Science and Technology) ;
  • Oh Kyu-Hwan (School of Materials Science and Engineering, Seoul National University)
  • 발행 : 2005.08.01
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

Nanostructured TiN/$TiB_2$/$TiSi_2$ and TiN/$TiB_2$/$Ti_5Si_2$ composite powders have been prepared by mechanochemical reaction from mixtures of Ti, BN, and $Si_3N_4$ powders. The raw materials have reacted to form a uniform mixture of TiN, $TiB_2$ and $TiSi_2$ or $Ti_5Si_3$ depending on the amount of $Si_3N_4$ used in the starting mixtures, and the reaction proceeded through so-called mechanically activated self-sustaining reaction (MSR). Fine TiN and $TiB_2$ crystallites less than a few tens of nanometer were homogeneously dispersed in the amorphous $TiSi_2$ or $Ti_5Si_3$ matrix after milling for 12 hours. These amorphous matrices became crystalline phases after annealing at high temperatures as expected, but the original microstructure did not change significantly.

키워드

참고문헌

  1. J. H. Shim, J. S. Byun and Y. W. Cho: Scr. Mater., 47 (2002) 493 https://doi.org/10.1016/S1359-6462(02)00188-4
  2. J. H. Shim, J. S. Byun and Y. W. Cho: J. Metastable and Nanocrystalline Mater., 15-16 (2003) 557 https://doi.org/10.4028/www.scientific.net/JMNM.15-16.557
  3. J. H. Shim, J. S. Byun and Y. W. Cho: J. Am. Ceram. Soc., 87 (2004) 1853 https://doi.org/10.1111/j.1151-2916.2004.tb06330.x
  4. J. S. Byun, J. H. Shim and Y. W. Cho: Scr. Mater., 50 (2004) 279 https://doi.org/10.1016/j.scriptamat.2003.09.050
  5. J. S. Byun, J. H. Shim and Y. W. Cho: J. Alloys and Compounds, 365 (2004) 149 https://doi.org/10.1016/S0925-8388(03)00638-8
  6. J. W. Kim, H. S. Chung, J. H. Shim, J. P. Ahn, Y. W. Cho and K. H. Oh: to be published in J. Alloys and Compounds
  7. B. D. Cullity and S. R. Stock: Elements of X-ray diffraction, Prentice Hall, London (2001) 167
  8. Z. A. Munir: Am. Ceram. Soc. Bull., 67 (1988) 342
  9. L. Takacs: Prog. Mater. Sci., 47 (2002) 355 https://doi.org/10.1016/S0079-6425(01)00002-0