Journal of Powder Materials (한국분말재료학회지)

The Korean Powder Metallurgy & Materials Institute (한국분말재료학회 (*구 분말야금학회))
권호 표지
DOI QR코드

DOI QR Code

Effect of Debinding Conditions on the Microstructure of Sintered Pb(Mg1/3Nb2/3)O3-PbTiO3

  • Yun Jung-Yeul (Powder Materials Research Center, KIMM) ;
  • Jeon Jae-Ho (Powder Materials Research Center, KIMM) ;
  • L.Kang Suk-Joong (Materials Science and Engineering, KAIST)
  • Published : 2005.08.01
Download PDF
⟨ Previous Next ⟩

Abstract

In order to fabricate complex-shaped polycrystalline ceramics by sintering, organic binders are usually pre-mixed with ceramic powders to enhance the formability during the shape forming process. These organic binders, however, must be eliminated before sintering so as to eliminate the possibilities of poor densification and unusual grain growth during sintering. The present work studies the effect of binder addition on grain growth behavior during sintering of $92(70Pb(Mg_{1/3}Nb_{2/3})O_3-30PbTiO_3))$-8PbO(mol%) piezoelectric ceramics. The microstructures of the sintered samples were examined for various heating profiles and debinding schedules of the binder removal process. Addition of Polyvinyl butyral(PVB) binder promoted abnormal grain growth especially in incompletely debinded regions. Residual carbon appears to change the grain shape from comer-rounded to faceted and enhance abnormal grain growth.

Keywords

References

  1. M. N. Rahaman, R. E. Dutton and S. L. Semiatin: Mater. Sci. and Eng. A., 360 (2003) 169 https://doi.org/10.1016/S0921-5093(03)00436-2
  2. M. J. Edirisinghe and J. R. G. Evans: Int. J. High Technol. Ceram., 2 (1986) 1 https://doi.org/10.1016/0267-3762(86)90002-0
  3. W. Mailinowsky and A. Withop: Am. Ceram. Soc. Bull., 57 (1978) 523
  4. L. E. Cross, J. J. Jang and R. E. Newnham: Ferooelectrics, 23 (1980) 187 https://doi.org/10.1080/00150198008018801
  5. S. Nomura and K. Uchino: Ferroelectrics, 50 (1983) 197 https://doi.org/10.1080/00150198308014450
  6. S. L. Swartz, T. R. Shrout, W. A. Schulze and L. E. Cross: J. Am. Ceram. Soc., 67 (1984) 311 https://doi.org/10.1111/j.1151-2916.1984.tb19528.x
  7. S. L. Swartz and T. R. Shrout: Mater. Res. Bull., 17 (1982) 1245 https://doi.org/10.1016/0025-5408(82)90159-3
  8. B. K. Lee, S. Y. Chung and S.-J. L. Kang: Acta Mater., 48 (2000) 1575 https://doi.org/10.1016/S1359-6454(99)00434-6
  9. C. W. Jang, J. S. Kim and S.-J. L. Kang: J. Am. Ceram. Soc., 85 (2002) 1281 https://doi.org/10.1111/j.1151-2916.2002.tb00258.x
  10. S.-J. L. Kang and S. M. Han: MRS Bull., 20 (1995) 33
  11. J. G. Fisher, M. S. Kim, H. Y. Lee and S.-J. L. Kang: J. Am. Ceram. Soc., 87 (2004) 937 https://doi.org/10.1111/j.1551-2916.2004.00937.x
  12. D. N. Yoon and W. J. Huppman: Acta Metall., 27 (1979) 693 https://doi.org/10.1016/0001-6160(79)90020-8
  13. H. Moon, B. K. Kim and S.-J. L. Kang: Acta Mater., 49 (2001) 1293 https://doi.org/10.1016/S1359-6454(00)00394-3

Cited by

  1. Study on the Recovery Silver and Nanoparticles Synthesis from LTCC By-products of Lowly Concentrated Silver vol.25, pp.3, 2018, https://doi.org/10.4150/KPMI.2018.25.3.232