부스바(Busbar)형 전기접점의 단락통전성능 해석기법 개발

Development of the Analysis Technology for Short Circuit Current Capability of Busbar-Type Electrical Contacts

  • 오연호 (한국전기연구원 신전력기기그룹) ;
  • 송기동 (한국전기연구원 신전력기기그룹) ;
  • 김진기 (진광이앤씨 부설연구소)
  • 발행 : 2005.02.01

초록

This study presents an analysis technique that can consider all variables which are needed in the design of short circuit current capability of electrical contacts. Required variables in the design are material of contact, contacting area, applied force, asperity of surface, current and so on. Short circuit current capability test was carried out for the interrelation of design variables and the verification of analysis technique. Temperature rise equation of the contacts was obtained from the test results, and also, a standard that is criterion of the occurrence availability of melting or spot of contact surface from test results was established.

키워드

참고문헌

  1. Ragnar Holm, Electrical Contacts : Theory and Applications 4th Ed., Berlin, Springer Verlag, pp. 1-26, 1979
  2. R. W. Caven, Jr. and J. Jalali, Predicting the contact resistance distribution of electrical contacts by modeling the contact interface, Proc. of the Thirty-seventh IEEE Holm Conf. Electrical Contacts, pp. 83-89, 1991 https://doi.org/10.1109/HOLM.1991.170807
  3. Stephan Schoft, Josef Kindersberger and Helmut Lobl, Joint Resistance of Busbar- Joints with Randomly Rough Surfaces, Proc. of the 21th Conf. on electrical Contacs, pp230-237, 2002
  4. Paul G. Slade, Electrical Contacts : Principles and Applications, Marcel Dekker, Inc., pp. 1-83
  5. J. A. Greenwood, Constriction resistance and the real area of contact, Brit. J. Appl. Phys., Vol.17, pp. 1621-1632, 1966 https://doi.org/10.1088/0508-3443/17/12/310
  6. J. A. Greenwood, A unified thoery of surface roughness, Proc. R. Soc. Lond. A 393, pp. 133-157, 1984 https://doi.org/10.1098/rspa.1984.0050
  7. Peter Wriggers, Computational Contact Mechanics, Wiley, pp. 55-71, 2002
  8. J. A. Greenwood, the area of contact between rough surfaces and flats, Journal of Lubrication Technology, pp. 81-91, 1967