대한전기학회논문지:전기기기및에너지변환시스템부문B (The Transactions of the Korean Institute of Electrical Engineers B)

대한전기학회 (The Korean Institute of Electrical Engineers)
권호 표지

100마력 고온초전도 동기전동기 개발

Development of a 100 hp HTS Synchronous Motor

  • 발행 : 2005.02.01
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

Korea Electrotechnology Research Institute(KERI) has successfully developed a 100hp-1800rpm-class high temperature superconducting(HTS) motor with high efficiency under partnership with Doosan Heavy Industries & Construction Co. Ltd. This motor has a HTS field winding and an air-cooled stator. The advantages of HTS motor can be represented by a reduction of 50% in both losses and size compared to conventional motors of the same rating. The cooling system is based on the heat transfer mechanism of the thermosyphon by using GM cryocooler as cooling source. The cold head is in contact with the condenser of a Ne-filled thermosyphon. Independently, the rotor assembly was tested at the stationary state and combined with stator. The HTS field winding could be cooled into below 30K. Test of open-circuit characteristics(OCC) and short-circuit characteristics(SCC) and load test with resistive load bank were conducted in generator mode. Also, load tests in motor mode driven by inverter were finished at KERI. Maximum operating current of field winding at 30K was 120A. From OCC and SCC test results synchronous inductance and synchronous reactance were 2.4mH, 0.49pu, respectively. Efficiency of this HTS machine was 93.3% in full load(100hp) test. This paper will present design, construction. and experimental test results of the 100hp HTS machine.

키워드

참고문헌

  1. A. Appleton and R. MacNab, 'A Model Superconducting Motor', Low Temperature and Electric Power, Oxford: Pergamon Press, 1970
  2. P. Thullen, et al., 'Multipole superconducting electric motors for ship propulsion', IEEE Trans. Magnetics, Vol. 11, 1975 https://doi.org/10.1109/TMAG.1975.1058673
  3. Yamaguchi, K., Takahashi, M., Shiobara, R., Kimura, K., 'Development of a 70 MW class superconducting generator', IEEE Trans. on Applied Supercond., Vol. 7, No. 2, 527-530, 1997 https://doi.org/10.1109/77.614557
  4. G. Papst, B.B. Gamble, A.J. Rodenbush and R. Schottler, 'Development of synchronous motors and generators with HTS field windings', Supercon. Sci. Technol. Vol. 10, pp. 924-926, 1997 https://doi.org/10.1088/0953-2048/10/12/013
  5. J.P. Voccio, B.B. Gamble, C.B. Prum, H.J. Picard, '125 HP HTS Motor Field Winding Development', IEEE Trans. on Appl. Supercon., Vol. 7,No. 2, pp. 519-522, 1997 https://doi.org/10.1109/77.614555
  6. D. Aized., et al., 'Status of the 1,000hp HTS Motor Development', IEEE Transactions on applied superconductivity, Vol. 9, No.2, June, 1999 https://doi.org/10.1109/77.783514
  7. David Madura, et al, 'Test results of a 5000HP HTS Motor', The Applied Superconductivity Conference, Houston, Texas August 6. 2002
  8. M. Frank, et al, 'Long-Term Operational Experience With First Siemens 400kW HTS Machine in Diverse Configurations', IEEE Transactions on applied superconductivity, Vol. 13, No.2, June, 2003 https://doi.org/10.1109/TASC.2003.813013
  9. 백승규, 손명환, 김석환, 이언용, 권영길, '100 HP급 고온초전도 모터의 설계 및 성능해석', 초전도.저온공학회 논문집, 제4권 2호, pp. 31-37, 2002. 11
  10. J.-T. Eriksson, R. Mikkonen, J. Paasi, R. Perala and L. Soderlund, 'A HTS Synchronous Motor at Different Operating Temperature', IEEE Transactions on applied superconductivity, Vol. 7, No.2, June, 1997 https://doi.org/10.1109/77.614556