참고문헌
- Markiewicz, B. R., 'Analysis of the Computer Torque Drive Method and Comparison with Conventional Position Servo for a Computer Controlled Manipulator,' Tech. Memorandum 33- 601, Jet Propulsion Lab., Pasadena, CA. 1973
- Bejczy, A. K., 'Robot Arm Dynamics and Control,' Tech. Memorandum, Jet Propulsion Lab., Pasadena, CA. 1974
- Egeland, O., 'On the Robustness of Computed Torque Method in Manipulator Control,' Proc. IEEE Int. Conf. on Robotics and Automation, pp. 1203-1208, 1986
- Slotine, J-J. and Li, W., 'On the Adaptive Control of Robot Manipulators,' International Journal of Robotics Research, Vol. 6, No. 3, pp. 49-59, 1987 https://doi.org/10.1177/027836498700600303
- Middleton, R. and Goodwin, G., 'Adaptive Computed Torque Control for Rigid Link Manipulators,' Systems and Control Letters, Vol. 10, No. 1, pp. 9-16, 1988 https://doi.org/10.1016/0167-6911(88)90033-3
- Koivo, A. and Guo, T., 'Adaptive Linear Controller for Robotic Manipulators,' IEEE Trans. on Automatic Control, Vol. 28, No. 2, pp.162-171, 1983 https://doi.org/10.1109/TAC.1983.1103211
- Slotine, J. J. and Sastry, S. S., 'Tracking Control of Non-Linear Systems Using Sliding Surfaces, with Application to Robot Manipulators,' Int. J. Control, Vol. 38, No. 2, pp.465-492, 1983 https://doi.org/10.1080/00207178308933088
- Chen, Y. F., Mita, T. and Wakui, S., 'A New and Simple Algorithm for Sliding Mode Trajectory Control of the Robot arm,' IEEE Trans. on Automatic Control, Vol. 33, No.7, July 1990
- Singer, N. C. and Seering, W. P., 'Preshaping Command Inputs to Reduce System Vibration,' ASME J. of Dynamic Systems, Measurement, and Control, pp. 76-82, Mar. 1990
- Luh, J. Y. S., Walker, M. W. and Paul, R. P. C., 'Resolved Acceleration Control of Mechanical Manipulators,' IEEE Trans. on Automatic Control,'pp. 468-474, July, 1980
- Gilbert, E. G.. and Ha, I. J., 'An Approach to Nonlinear Feedback Control with Application to Robotics,' Proc. 22nd IEEE Decision and Control Conference, San Antonio, TX., pp. 14-16, Dec. 1983
- Uebel, M. A., Minis, I. and Cleary, K., 'Improved Computed Torque Control for Industrial Robots,' Proc. IEEE Int. Conf. on Robotics and Automation, Nice, France, pp. 528-533, May, 1992 https://doi.org/10.1109/ROBOT.1992.220238
- Furuta, K., Mayeda H., 'Robust Control of a Robot Manipulator with Nonlinearity,' Robotica, Vol. 2, pp. 75-81, 1984 https://doi.org/10.1017/S0263574700001909
- Seraji, H., 'An approach to Multivariable Control of Manipulators,' Trans. ASME, Vol. 109, pp. 146-154, 1987 https://doi.org/10.1115/1.3248035
- Thomas, M. and Tesar, D., 'Dynamic Modeling of Serial Manipulator Arms,' ASME J. of Dynamic Systems, Measurement, and Control, Vol. 104, pp. 218-228, Sep. 1982 https://doi.org/10.1115/1.3139701
- Benedict, C. E. and Tesar, D., 'Dynamic Response Analysis of Quasi-Rigid Mechanical Systems Using Kinematic Influence Coefficients,' Journal of Mechanisms, Vol. 6, pp. 383, 1971
- Craig, J. J., 'Introduction to Robotics Mechanics and Control,' Addison-Wesley, Reading, Massachusetts, 1989
- Luh, J. Y. S., Walker, M. W. and Paul, R. P. C., 'On- Line Computational Scheme for Mechanical Manipulators,' ASME J. of Dynamic Systems, Measurement, and Control, Vol. 102, pp.69-76, June, 1980 https://doi.org/10.1115/1.3149599