Journal of the Korean Institute of Electrical and Electronic Material Engineers (한국전기전자재료학회논문지)

The Korean Institute of Electrical and Electronic Material Engineers (한국전기전자재료학회)
권호 표지
DOI QR코드

DOI QR Code

The Resistivity Properties and Adhesive Strength of Cu Thin Firms Fabricated by EBE Method

전자빔 증착법으로 제작한 Cu 박막의 부착력과 저항율 특성

  • 신중홍 (동의대학교 전기공학과) ;
  • 유충희 (동의대학교 전기공학과) ;
  • 백상봉 (동의대학교 전기공학과)
  • Published : 2005.01.01
Download PDF
⟨ Previous Next ⟩

Abstract

In this thesis, We Fabricated Cu thin films of 1000 $\AA$, 3000 $\AA$, and 6000 $\AA$ thickness on the single crystal sapphire, polycrystal alumina, and amorphous slide glass substrates deposited by electron beam evaporation(EBE) method. We investigated properties of resistivity and adhesion of these Cu thin films under various conditions, substrate temperature(room temperature, 10$0^{\circ}C$, 20$0^{\circ}C$ under vacuum) and annealing temperatures(400 $^{\circ}C$, 600 $^{\circ}C$ for 30 min after the deposition). We found that these adhesion was increased in order of slide glass, sapphire, and alumina. The adhesion of the Cu thin films on alumina was high value about 4 times, compared with that of the Cu thin films on slide glass. We found that these resistivities were decreased with increasing substrate temperature and thin film thickness. The resistivity(2.05 $\mu$Ω\ulcornercm) of the Cu thin films with 6000 $\AA$ thickness at 200 $^{\circ}C$ on the slide glass was low value, compared with that of aluminum(2.66 $\mu$Ω\ulcornercm).

Keywords

References

  1. S. W. Russell, S. A. Rafalski, R. L. Spreitzer, J. Li, M. Moinpour, F. Moghadam, and T. L. Alford, 'Enhanced adhesion of copper to dielectrics via titanium and chromium additions and sacrificial reactions', Thin solid film, Vol. 262, p. 154, 1995
  2. D. Adams, T. L. Alford, N. D. Theodore, S. W. Russell, R. L. Spreitzer, and J. W. Mayer, 'Passivatianiurn of Cu via refractory metal nitridation in an amonia ambient', Thin Solid Film, Vol. 262, p, 199, 1995
  3. T. Maruyama and T. Morishita, 'Copper nitride thin films prepared by radio-frequency reactive sputter', J. Appl. Phys., Vol. 78, No. 6, p, 4104, 1995
  4. T. Shacham-Diamand, V. Dubin, and M. Angyal, 'Electroless copper deposition for ulsi', Thin Solid Films Vol. 262, p. 92, 1995
  5. R. P. Vinci, E. M. Zielinski, and J. C. Bravman, 'Thermal Strain and Stress in Copper Thin Films', Thin Solid Films, Vol 262, p. 142, 1995
  6. P. J. Ding and W. A. Lanford, 'Effects of the addtion of small amount of al to copper: Corrosion, resistivity, adhesion, morphology, and diffusion', J. Appl, Phys., Vol. 75, No.7, p. 3627, 1994
  7. 小宮宗治, '超高眞空がひろく世界', Chap. 3, Blue Backs, 1978
  8. H. K. Pulker, 'Coatings on Glass', Elsevier Science Ltd, 1984
  9. 小林, 'スバッタ 薄膜' Chap. 5,日刊工業新聞社, 1993
  10. S. O. Kasap, 'Principles of Electrical Engineering Materials and Devices', Chap 1-2, IRWIN, 1997
  11. 송재성, 오영우. 'RF 마그네트론 스퍼터링법에 의해 증착된 구리막의 특성', 전기전자재료학회지, 9권, 7호, p. 727, 1996
  12. B. A. Movchan and A. V. Demchishin, 'Metaloved', Fiz. Matal. Metalloved, Vol. 28, p. 83, 1969
  13. 이우선, 정용호, 이상일 'RF 스퍼터링 증착에 의한 질화 텅스텐 박막의 비저항 특성', 전기전자재료학회지, 8권, 2호, p. 196, 1995
  14. W. J. Lee, J. S. Min, S.K. Rha, N. S. Chun, D. W. Kim, and C. O. Park, 'Copper chemical vapor deposition using copper hexafluoroace-tylacetonate trimethylvinylsilane', J. Mater. Sci.,: Mater. Electron., Vol. 7, p, 111, 1996
  15. 조남인, 김용석, 김창교, '화학적기상증착법에 의한 구리박막의 전기전도도 개선에 관한 연구', 전기전자재료학회논문지, 13권, 6호p. 459, 2000