DOI QR코드

DOI QR Code

Microstructural and Piezoelectric Properties of Low Temperature Sintering PMN-PZT Ceramics with the Variations of Sintering Times

저온소결 PMN-PZT 압전세라믹의 소성시간에 따른 미세구조 및 압전특성

  • Published : 2005.03.01

Abstract

In this paper, in order to develop the low temperature sintering ceramics for multilayer piezoelectric transformer, PMN-PZT ceramics were manufactured with the variations of sintering times, and their microstructural, piezoelectric and dielectric properties were investigated. Li$_2$CO$_3$ and Bi$_2$O$_3$ were used as sintering aids and the specimens were sintered during 30, 60, 90, 120, 150, and 180 minutes, respectively. At the specimen sintered during 90 minute, mechanical quality factor(Qm), electro-mechanical coupling factor(kp) and dielectric constant were showed the optimum values of 2,356, 0.504 and 1,266, respectively.

Keywords

References

  1. J. B. Yoo, K. H. Yoon, Y. W. Lee, S. S. Suh, J. S. Kim, and C. S. Yoo, 'Electrical characteristicsof the contour-mode piezoelectric transformer with ring/dot electrode area ratio', Jpn. J. Appl. Phys., Vol. 39A, No. 5A, p. 2680, 2000
  2. J. Hu, Y. Fuda, M. Katsuno, and T. Yoshida, 'A study on the rectangular-bar-shaped multilayer piezoelectric transformer using length extensional vibration mode', Jpn. J. Appl. Phys., Vol. 38, No. 5B, p. 3208, 1999
  3. Y. Sasaki, M. Yamamoto, A. Ochi, T. Inoue, and S. Takahshi, 'Small multilayer piezoelectric transformers with high power densitycharacteristics of second and third-mode rosen-type transformers', Jpn. J. Appl. Phys., Vol. 38, No. 9B, p. 5598, 1999
  4. N. Y. Wong, Y. Zhang, H. L. W. Chan, and C. L. Choy, 'A bilayer piezoelectric transformer operating in a bending vibration mode', Mat. Sci. Eng. B, Vol. 99, Iss. 1-3, p. 164, 2003 https://doi.org/10.1016/S0921-5107(02)00437-3
  5. R. Zuo, L. Li, and Z. Gui, 'Modified cofiringbehaviors between PMN-PNN-PZT piezoelectric ceramics and PZT-doped 70 Ag-30 Pd alloy metallizatin', Mat. Sci. Eng. A, Vol. 326, Iss. 2, p. 202, 2002
  6. T. Hayashi, T. Hasegawa, J. Tomizawa, and Y. Akiyama, 'Low-temperature sintering of $LiBiO_2$-coated $Pb(Mn_{1/3}Nb_{2/3})O_3-PbZrO_3-PbTiO_3$ powers prepared by surface chemical modification method and their piezoelectric properties', Jpn. J. Appl., Vol. 42, No. 9B, p. 6074, 2003 https://doi.org/10.1143/JJAP.42.6074
  7. S. Dong, K. Murakami, S. Kaneko, and M. Xiong, 'Piezoelectric properties of PZT ceramics sintered at low temperature with comples-oxide additives', Journal of the Ceramic Society of Japan, Vol. 101, No. 10, p. 1090, 1993
  8. D. Dong, M. Xiong, K. Murakami, and S. Kaneko, 'Lowering of sintering temperature of $Pb(Zr,Ti)O_3$ ceramics by the addition of $BiFeO_3$ and $Ba(Cu_{0.5}W_{0.5})O_3$', Ferroelectrics, Vol. 145, p. 125, 1993
  9. J. H. Yoo, C. B. Lee, Y. H. Jeong, K. H. Chung, D. C. Lee, and D. S. Paik, 'Microstructural and piezoelectric properteis of low temperature sintering PMN-PZT ceramics with the amount of $Li_2CO_3$ addition', Materials Chemistry and Physics, Vol. 90, Iss. 2-3, p. 386, 2005