Abstract
Ultrasonic guided waves are gaining increasing attention for the inspection of platelike and rodlike structures. At the same time, inspection methods that do not require contact with the test piece are being developed for advanced applications. This paper capitalizes on recent advances in the areas of guided wave ultrasonics and noncontact ultrasonics to demonstrate a superior method for the nondestructive detection of defects thinning simulating hidden corrosion in thin aluminum plates. The proposed approach uses EMAT(electro-magnetic acoustic transducer) for the noncontact generation and detection of guided waves. Interesting features in the dispersive behavior of selected guided modes are used for the detection of plate thinning. It is shown that mode cutoff measurements provide a qualitative detection of defects thinning. Measurement of the mode group velocity can be also used to quantify depth thinning.
유도초음파는 박판이나 봉재와 같은 구조를 효율적으로 검사할 수 있는 초음파로 주목받고 있으며, 더불어 시험체를 비접촉으로 검사할 수 있는 기법이 개발되면서 다양한 분야에 응용하기 위해 연구되고 있다. 본 연구에서는 비접촉식 초음파기법과 유도초음파의 장점을 결합하여 기존의 검사기법에 비해 효율적인 검사기법을 제안하고자 하였으며, 실험적인 검증을 위해 알루미늄 박판에 모의 부식결함을 가공하여 두께감육을 검출하고 평가하였다. 제안된 비접촉식 초음파기법으로는 EMAT을 이용하여 유도초음파를 발생 및 수신하였다. 선택된 유도초음파 모드의 분산거동특성에서 모드 컷-오프는 두께 감육을 검출할 수 있는 정성적인 파라미터이며, 군속도 변화는 두께 감육의 깊이를 정량적으로 평가할 수 있는 파라미터로 나타났다.