비파괴검사학회지 (Journal of the Korean Society for Nondestructive Testing)

  • 제25권6호
  • /
  • Pages.459-466
  • /
  • 2005
  • /
  • 1225-7842(pISSN)
  • /
  • 2287-402X(eISSN)
한국비파괴검사학회 (The Korean Society for Nondestructive Testing)
권호 표지

Fabrication of Microcantilever Ultrasound Sensor and Its Application to the Scanning Laser Source Technique

  • Sohn, Young-Hoon (Center for Quality Engineering and Failure Prevention, Narthwestern University) ;
  • Krishnaswamy, Sridhar (Center for Quality Engineering and Failure Prevention, Narthwestern University)
  • 발행 : 2005.12.30
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

The scanning laser source (SLS) technique has been proposed recently as an effective way to investigate small surface-breaking defects, By monitoring the amplitude and frequency changes of the ultrasound generated as the SLS scans over a defect, the SLS technique has provided enhanced signal-to-noise performance compared to the traditional pitch-catch or pulse-echo ultrasonic methods, An extension of the SLS approach to map defects in microdevices is proposed by bringing both the generator and the receiver to the near-field scattering region of the defects, To facilitate near-field ultrasound measurement, silicon microcantilever probes are fabricated using microfabrication technique and their acoustical characteristics are investigated, Then, both the laser-generated ultrasonic source and the microcantilever probe are used to monitor near-field scattering by a surface-breaking defect.

키워드

참고문헌

  1. Journal of Vacuum Science and Technology A v.8 no.4 Microfabrication of cantilever styli for the atomic force microscope Albrecht, T.R.;Akamine, S.;Carver, T.E.;Quate, C.F. https://doi.org/10.1116/1.576520
  2. Micromachined Transducers Sourcebook Kovacs, G.T.A.
  3. Material Evaluation v.58 no.2 Laser ultrasonic detection of surface breaking discontinuities: Scanning laser source technique Kromine, A.K.;Fomitchov, P.A.;Krishnaswamy, S.;Achenbach, J.D.
  4. Review of Scientific Instruments v.67 no.9 Vibrations of free and surface-coupled atomic force microscope cantilevers: Theory and experiment Rabe, U.;Janser, K.;Arnold, W. https://doi.org/10.1063/1.1147409
  5. Sensors and Actuators A v.102 Microfabricated silicon coaxial field sensors for near-field scanning optical and microwave microscopy Rosner, B.T.;Bork, T.;Agrawal, V.;van der Weide, D.W. https://doi.org/10.1016/S0924-4247(02)00341-2
  6. Proceedings of Transducers'91, the 6th International Conference on Solid-State Sensors and Actuators Comer compensation techniques in anisotropic etching of (100)-silicon using aqueous KOH Sandmaier, H.;Offereins, H.L.;Kuhl, K.;Lang, W.
  7. Ultrasonics v.39 Mass spring lattice modeling of the scanning laser source technique Sohn, Y.;Krishnaswamy, S. https://doi.org/10.1016/S0041-624X(02)00250-0
  8. Journal of Acoustic Society of America v.115 no.1 Interaction of a scanning laser-generated ultrasonic line source with a surface-breaking flaw Sohn, Y.;Krishnaswamy, S. https://doi.org/10.1121/1.1630997
  9. Theory of Vibration with Applications Thomson, W.T.;Dahleh, M.D.
  10. Journal of Applied Physics v.36 no.1 Young's modulus, shear modulus, and Poisson's ratio in silicon and germanium Wortman, J.J.;Evans, R.A. https://doi.org/10.1063/1.1713863
  11. Applied Physics Letter v.64 no.2 Ultrasonic force microscopy for nanometer resolution subsurface imaging Yamanaka, K.;Ogiso, H. https://doi.org/10.1063/1.111524