Journal of Mechanical Science and Technology

The Korean Society of Mechanical Engineers (대한기계학회)
권호 표지

Manufacturing and Temperature Measurements of a Sodium Heat Pipe

  • Published : 2001.11.01
Download PDF
⟨ Previous Next ⟩

Abstract

A high-temperature sodium stainless steel heat pipe was fabricated and its performance has been investigated. The working fluid was sodium and it was sealed inside a straight tube container made of stainless steel. The amount of sodium occupied approximately 20% of the total volume of the heat pipe and its weight was 65.7gram. The length of a stainless steel container is 1002mm and its outside diameter is 25.4mm. Performance tests were carried out in a room air condition under a free convective environment and the measured temperatures are presented. The start-up behavior of the heat pipe from a frozen state was investigated for various heat input values between 600W and 1205W. In steady state, axial temperature distributions of a heat pipe were measured and its heat transfer rates were estimated in the range of vapor temperature from 50$0^{\circ}C$ to 63$0^{\circ}C$. It is found that there are small temperature differences in the vapor core along the axial direction of a sodium heat pipe for the high operating temperatures. But for the range of low operating temperatures there are large temperature drops along the vapor core region of a sodium heat pipe, because a small vapor pressure drop makes a large temperature drop. The transition temperature was reached more rapidly in the cases of high heat input rate for the sodium heat pipe.

Keywords

References

  1. Carey, V. P., 1992, Liquid-vapor Phase Change Phenomena, Hemisphere Pub. Corp.
  2. Cao, Y. and Faghri, A., 1993, 'A Numerical Analysis of High-Temperature Heat Pipe Startup From the Frozen State,' Journal of Heat Transfer, Vol. 115, pp. 247-254
  3. Chi, S. W., 1976, Heat Pipe Theory and Practice: A Source Book, 2nd ed., Hemisphere Pub. Corp.
  4. Collier, J. G. and Thome, J. R., 1996, Convective Boiling and Condensation, 3rd ed., Clarendon Press, Oxford, Chapter 10, pp. 436-438
  5. Cotter, T. P., 1965, 'Theory of Heat Pipes,' Los Alamos Scientific Laboratory Report No.LA-3246-MS
  6. Faghri, A., Buchko, M. and Cao, Y., 1991, 'A Study of High Temperature Heat Pipes With Multiple Heat Sources and Sinks,' Journal of Heat Transfer, Vol. 113, pp. 1003-1009
  7. Faghri, A., 1995, Heat Pipe Science and Technology, Taylor & Francis
  8. Jang, J. H., Faghri, A., Chang, W. S. and Mahefkey, E. T., 1990, 'Mathematical Modeling and Analysis of Heat Pipe Start-Up From the Frozen State,' Journal of Heat Transfer, Vol. 112, pp. 586-594
  9. Jang, J. H., 1996, 'Performance Characteristics of Liquid Metal Heat Pipes- A Potassium Heat Pipe,' Proc. of the 3rd KSME-JSME Thermal Engineering Conference, Vol. I, pp. 89-94
  10. Ko, Y. K. and Lee, S. H., 2000, 'Manufacturing and Performance Test of a High-temperature Sodium Heat Pipe,' Proc. 5th International Symposium on Heat Transfer, pp. 680-685, Beijing
  11. Kutateladze, S. S., 1952, 'Heat Transfer in Condensation and Boiling,' 2nd ed., Mashgiz, Moscow, AEC Translation 3770, U. S. AEC Tech. Info. Service
  12. Lee, S. H., Ko, Y. K., Lee, B. I. and Lee, Y., 2000, 'Manufacturing and Operation Test of a High Temperature Sodium Heat pipe,' Proc. 4th JSME-KSME Thermal Engineering conference, Vol. 1, pp. 567-572, Kobe
  13. Silver, R. S. and Simpson, H. C., 1961, 'The Condensation of Superheated Steam,' Proc. Nat. Engng. Lab. Conf., Glasgow, Scotland
  14. Sukhatme, S. P. and Rohsenow, W. M., 1996, 'Heat Transfer During Film Condensation of a Liquid Metal Vapor,' ASME J. of Heat Transfer, pp. 19-28