Journal of Dental Rehabilitation and Applied Science (구강회복응용과학지)

Korean Academy of Stomatognathic Function and Occlusion (대한턱관절교합학회)
권호 표지

A Study on the Shear Bond Strength between Various Denture Bases Resin and Artificial Resin Teeth

수종의 의치상 레진과 레진치아의 전단결합강도에 관한 연구

  • Lee, Sang-Wook (Department of Prosthodontics, College of Dentistry, Dankook University) ;
  • Cho, In-Ho (Department of Prosthodontics, College of Dentistry, Dankook University) ;
  • Lee, Joon-Seok (Department of Prosthodontics, College of Dentistry, Dankook University)
  • 이상욱 (단국대학교 치과대학 보철학교실) ;
  • 조인호 (단국대학교 치과대학 보철학교실) ;
  • 이준석 (단국대학교 치과대학 보철학교실)
  • Published : 2005.06.30
Download PDF
⟨ Previous Next ⟩

Abstract

The bond strength of denture base resin and resin teeth, is an important factor in the long term prognosis of dentures. The purpose of this study is to find an appropriate combination of commercial denture base resin and artificial resin teeth according to shear bond strength. In this study, the shear bond strength of various denture base resins (Vertex $RS^{(R)}$(Dentimax Ziest, Holland), $PERform^{(R)}$(Hedent GmbH., Germany), SR $IVOCAP^{(R)}$(Ivoclar AG, Schaan, Liechtenstein)) and resin teeth (SR Orthosit PE(Ivoclar AG, Schaan, Liechtenstein), $Trubyte^{(R)}$ $Biotone^{(R)}$(Dentsply, U.S.A.)) was evaluated. 1. In comparison of denture resin, the shear bond strength increased in the order of $IVOCAP^{(R)}$, $PERform^{(R)}$, Vertex $RS^{(R)}$. 2. In resin teeth, $Trubyte^{(R)}$ $Biotone^{(R)}$ showed higher strength, but there was no statistical difference between the groups. 3. According to loading direction, the lingual showed higher strength, but there was no statistical difference. 4. When using SR Orthosit PE, SR $IVOCAP^{(R)}$ showed significantly higher shear bond strength(p<0.05). 5. Fracture tendancy showed more cohesive fractures(59) than adhesive failures(13). $IVOCAP^{(R)}$ showed the most superior results statistically. $Trubyte^{(R)}Biotone^{(R)}$ showed the highest shear bond strength. When using the SR Orthosit PE, it is thought that $IVOCAP^{(R)}$ would present the most superior results.

Keywords

References

  1. Brien R. International Prosthodontic Workshop. The University of Michigan 1972;June 12-15
  2. Anderson GC, Schulte JK, Arnold TG. Dimensional stability of injection and conventional processing of denture base acrylic resin. J Prosthe Dent 1988; 60:394-398 https://doi.org/10.1016/0022-3913(88)90292-2
  3. Cunningham JL, Benington IC. An investigation of the variables which may affect the bond between plastic teeth and denture base resin. J Dent 1999;27:129-135 https://doi.org/10.1016/S0300-5712(98)00034-7
  4. Darbar UR, Huggett R, Harrison A, Williams K. The tooth-denture base bond. stress analysis using the finite element method. Eur J Prosthodont Restor Dent 1993;1:117-120
  5. ADA Guide to Dental Materials and Devices. v.1: 101-102
  6. ISO 3336. Dentistry-Synthetic Resin Teeth, International Organization for Standardization. 1977
  7. JIS 6506. Acrylic Resin Teeth, Japanese Stansard Association. 1989
  8. KDA Specification No.9. Acrylic Resin Teeth, Korean Dental Association Specification
  9. Rupp NW, Bowen RL, Paffenbarger GC. Bonding cold curing denture base acrylic resin to acrylic resin. J Am Dent Assoc 1971;83:601-606 https://doi.org/10.14219/jada.archive.1971.0355
  10. Thean HP, Chew CL, Goh KI. Shear bond strength of denture teeth to base: a comparative study. Quintessence Int 1996;27:425-428
  11. Buyukyilmaz S, Ruyter IE. The effects of polymerization temperature on the acrylic resin denture base-tooth bond. Int J Prosthodont. 1997;10:49-54
  12. Marchack BW, Yu Z, Zhao XY, White SN. Adhesion of denture tooth porcelain to heat-polymerized denture resin. J Prosthet Dent 1995;74:242-249 https://doi.org/10.1016/S0022-3913(05)80130-1
  13. Pickett HG, Appleby RG. A comparison of six acrylic resin processing techniques. JADA 1970;80:1301-1320
  14. Schmidt KH. The SR-Ivocap system and the structure of denture bases. Quintessence Int 1975;26:59-62
  15. Garfunkel E. Evaluation of dimensional changes in complete dentures processed by injection-pressing and the pack-and-press technique. J Prosthet Dent 1983;50:757-761 https://doi.org/10.1016/0022-3913(83)90085-9
  16. Huggett R, John G, Jagger RG, Bates JF. Strength of the acrylic denture base tooth bond. Br Dent J 1982;153:187-190 https://doi.org/10.1038/sj.bdj.4804883
  17. Hwang SW, Chung MK. Comparative tensile bond strength of heat-cured, cold-cured, and light cured denture base resins bonded to continuous-pressure injection type denture base resin. J Korean Acad Prosthodont 1993;31
  18. Ogle RE, Sorensen SE, Lewis EA. A new visible light-cured resin system applied to removable prosthodontics. J Prosthet Dent 1986;56:497-506 https://doi.org/10.1016/0022-3913(86)90397-5
  19. Geerts GA, Jooste CH. A comparison of the bond strengths of microwave- and water bath-cured denture material. J Prosthet Dent 1993;70:406-409 https://doi.org/10.1016/0022-3913(93)90075-Y
  20. Kimura H, Teraoka F, Sugita M. Application of microwave for dental technique(Part3). Development of model materials for microwave polymerization. J Osaka Univ Dent Sch 1987;27:41-50
  21. Schneider RL, Curtis ER, Clancy JM. Tensile bond strength of acrylic resin denture teeth to a microwaveor heat-processed denture base. J Prosthet Dent 2002;88: 145-150 https://doi.org/10.1067/mpr.2002.127898
  22. Eun SS, Kweon HS, Chung CH. A study on the physical properties and volumetric stability of SR-ivocap resin system. J Korean Acad Prosthodont 1998;36
  23. Barpal D, Curtis DA, Finzen F, Perry J, Gansky SA. Failure load of acrylic resin denture teeth bonded to high impact acrylic resins. J Prosthet Dent 1998;80: 666-671 https://doi.org/10.1016/S0022-3913(98)70053-8
  24. Clancy JM, Hawkins LF, Keller JC, Boyer DB. Bond strength and failure analysis of light-cured denture resins bonded to denture teeth. J Prosthet Dent 1991;65: 315-324 https://doi.org/10.1016/0022-3913(91)90182-V
  25. Jeong SJ, Kim KS, Cho IH. Light microscopic examination on the bonding of denture base resin and acrylic resin teeth. Dankook Univ. M.S. thesis 1998
  26. Yanikoglu DN, Duymus DZ, Bayindir DF. Comparative bond strengths of autopolymerizing denture resin and light cured composite resin to denture teeth. Int Dent J 2002;52:20-24 https://doi.org/10.1111/j.1875-595X.2002.tb00592.x
  27. Craig RG. Rertorative Dental Materials. St. Louis, C. V. Mosby Co. 1985;458-480
  28. Anderson JS. The strength of the joint between plain and copolymer acrylic teeth and denture base resin. Br Dent J 1958;107:317-320
  29. Kawara M, Carter JM, Ogle RE, Johnson RR. Bonding of plastic teeth to denture base resins. J Prosthet Dent 1991;66:566-571 https://doi.org/10.1016/0022-3913(91)90525-2
  30. Smith DC. The acrylic denture. Br Dent J 1961;18: 257-267
  31. Takahashi Y, Chai J, Takahashi T, Habu T. Bond strength of denture teeth to denture base resins. Int J Prosthodont 2000;13:59-65
  32. Morrow RM, Matvias FM, Windeler AS, Fuchs RJ. Bonding of plastic teeth to two heat-curing denture base resins. J Prosthet Dent 1978;39:565-568 https://doi.org/10.1016/S0022-3913(78)80195-4
  33. Schoonover IC, Fischer TE, Serio AF, Sweeney WT. Bonding of plastic teeth to heat-cured denture base resins. J Am Dent Assoc 1952;44:285-287 https://doi.org/10.1016/S0002-8177(52)43005-6
  34. Suzuki S, Sakoh M, Shiba A. Adhesive bonding of denture base resins to plastic denture teeth. J Biomed Mater Res 1990;24:1091-1030 https://doi.org/10.1002/jbm.820240811
  35. Lee JR, Kim CW, Kim YS. An experimental study of the bond strength of denture teeth bonded to denture base materials. J Korean Acad of Prosthodonti 1996;34
  36. Caswell CW, Norling BK. Comparative study of the bond strengths of three abrasion-resistant plastic denture teeth bonded to a cross-linked and a grafted, crosslinked denture base material. J Prosthet Dent 1986;55: 701-708 https://doi.org/10.1016/0022-3913(86)90447-6
  37. Chai J, Takahashi Y, Takahashi T, Habu T. Bonding durability of conventional resinous denture teeth and highly crosslinked denture teeth to a pour-type denture base resin. Int J Prosthodont 2000;13: 112-116
  38. Sorensen SE, Fjeldstad E. Bonding of plastic teeth to acrylic resin denture base material. Odont Tidskrift 1961;69:467-477
  39. Spratley MH. An investigation of the adhesion of acrylic resin teeth to dentures. J Prosthet Dent 1987;58:389-392 https://doi.org/10.1016/0022-3913(87)90065-5