References
- Bynre D, Houston F, Cleary R, Claffey N. The fit of cast and premachined implant abutments. J Prosthet Dent 1998;80:184-92 https://doi.org/10.1016/S0022-3913(98)70108-8
- Binon P. Evaluation of maching Accuracy and Consistency of Selected Implant, Standard Abutments and Laboratory Analog. Int J Prosthodont 1995;8:162-78
- Binon P. Implants and components :Entering the new millennium. Int J Oral Maxillofac Implants 2000;5:76-94
- Sones AD. Complication with osseointegrated implants. J Prosthet Dent 1989;62:81-585
- Sakaguchi RL, Borgersen SE. Nonlinear finite element contact analysis of dental implant components. Int J Oral MaxiIlofac Implants 1993;8:655-61
- Boggan R, Strong J. Misch C. Influence of hex geometry and prosthetic table width on static and fatigue strength of dental implants. J Prosthet Dent 1999;82:436-40 https://doi.org/10.1016/S0022-3913(99)70030-2
- Quirynen M, Bollen CML, Eyssen H, Van Steenberghe D. Microvial penetration along the implant components of the Branemark system. An in vitro study. Clin Oral Implants Res 1994;5:239-44 https://doi.org/10.1034/j.1600-0501.1994.050407.x
- Besimo CE, Guindy JS, Lewetag D, Meyer J. Prevention of bacterial leakage into and from prefabricated screw-retained crown on implants in vitro. Int J Oral Maxillofac Implants 1999;14:654-60
- Gross M, Abramovich I, Weiss EI. Microleakage at the abutment implant interface of osseointergrated implants. Int J Oral Maxiollfac Implants 1999;14:94-100
- Beat R. Mechanics of the implant-abutment connection: An 8-degree taper compared to a butt joint connection. Int J Oral Maxillofac Implants 2000;15:519-26
- Norton MR. An in vitro evaluation of the strength of an internal conical interface compared to a butt joint interface in implant design. Clin Oral Implants Res 1997;8:290-8 https://doi.org/10.1034/j.1600-0501.1997.080407.x
- Norton MR. An in vitro evaluation of the strength of a 1-piece and 2-piece conical abutment joint in implant design. Clin Oral Implants Res 2000;11:458-64 https://doi.org/10.1034/j.1600-0501.2000.011005458.x
- Squier RS, Psoter WJ. Taylor TD. Removable torques of conical, tapered implant abutments: the effects of anodization and reduction of surface area. Int J Oral Maxillofac Implants 2002;17:24-7
- Sutter F, Weber HP, Sorensen J. Belser U. The new restorative concept of the ITl dental implant system: design and engineering. Int J Periodontics & Restorative Dentistry 1993;13:409-31
- Persson LG. Bacterial colonization on internal surfaces of Branemark system implant components. Clin Oral Implants Res 1996;7:90-5 https://doi.org/10.1034/j.1600-0501.1996.070201.x
- Ericsson I, Persson LG, Berglundh T, Marinello CP, Lindhe J, Klinge B. Different types of inflammatory reactions in periimplant soft tissues. J Clin Periodont 1995;22:255-61 https://doi.org/10.1111/j.1600-051X.1995.tb00143.x
- Merz BR, Hunenbart S, Belser UC. Mechanics of the implant connection: an 8-degree taper compared to a butt joint connection. Int J Oral Maxillofac Implants 2000;15:519-26
- Schulte J, Coffey J. Comparison of screw retention of nine abutment systems: A pilot study. Implant Dent 1997;6:28-31
- Akca K, Cehreli MC, Iplikcioglu H. Evaluation of the mechanical characteristics of the implant abutment complex of a reduced diameter morse taper implant; a non-linear finite element stress analysis. Clinical Oral Implants Research 2003;14:444-55 https://doi.org/10.1034/j.1600-0501.2003.00828.x
- Behneke A, Behneke N, d' Hoedt B. The longitudinal clincal effectiveness of ITI solid screw implants in partially edenturous patients: a 5-year follow up report. Int J Oral Maxillofac Implants 2000;15:633-45
- Binon P, Brunski P, Gulbransen H. The role of screws in implant systems. Int J Oral Maxillofac Implants 1994;9:48-62
- Binon P, McHugh M. The effect of eliminating implant/abutment rotational misfit on screw joint stability. Int J Prosthodont 1996;9:511-9
- Breeding L, Dixon D. Torque required to loosen single-tooth implant abutment screws before and after simulated function. Int J Prosthodont 1993;6:435-9
- Brunski JE, Hipp JE. In the forces on endosteal implant; A mesurement system and biomechanical consideration. J Prosthet Dent 1984;51:82-90 https://doi.org/10.1016/S0022-3913(84)80112-2
- Burguette RL, Johns MR, King TB, Patterson EA. Tightening characteristic for screwed joint in osseointergrated dental implant. J Prosthet Dent 1994;71:592-9 https://doi.org/10.1016/0022-3913(94)90443-X
- Carr AB, Brunski JB, Hurley E. The effect of finishing and polishing techniques in implant cylinder preload; 9th Annual Meeting of the Academy of Osseointergration(Abstract). Int JOral Maxiollfac Implants 1995;10:123-4
- Charles JG, Joseph YKK, Kitichai R. Clinical complications of osseintegrated implants. J Prosthet Dent 1999;81:537-52 https://doi.org/10.1016/S0022-3913(99)70208-8
- Cibirka R, Nelson S. Examination of the implantabutment interface after fatigue testing. J Prosthet Dent 2001;85:268-75 https://doi.org/10.1067/mpr.2001.114266
- Dixon D, Breeding L, Sadler P, Mckay M. Comparison of screw loosening, rotation, and deflection among three implant designs. J Prosthet Dent 1995;74:270-8 https://doi.org/10.1016/S0022-3913(05)80134-9
- Ekfeldt A. Clinical evaluation of single-tooth restorations supported by osseointergrated implants: A retrospective study. Int J Oral Maxiollfac Implants 1994;9:179-83
- Haack JE, Sakaguchi RL, Sun T, Coffey JP. Elongation and preload stress in dental implant abutment screws. Int J Oral Maxillofac Implants 1995;10:529-36
- Jeong YT, Chung CH, Lee HT. Screw joint stability according to abutment screw materials. J Korean Acad prosthodont 2002;40:275-86
- John K. Schulte, James Coffey. Comparison of screw retention of nine abutment systems:A pilot study. Implnat Dent. 1997;6:28-31
- Kim NH, Chung CH, Son MK, Back DH. A study on the fit of the implant-abutment-screw interface. J Korean Acad Prosthodont 2003;41:503-18
- Khraisat A, Stegaroiu R, Nomura S, Miyaka WO. Fatigue resistance of two implant/abutment joint designs. J Prosthet Dent 2002;88:604-10 https://doi.org/10.1067/mpr.2002.129384
- Laney W, Jemt T, Harris D. Osseointegrated implants for single-tooth replacement: Progress report from a multicenter prospective study after 3years. Int J Oral Maxillofac Implants 1994;9:49-54
- Levine RA, et al. A multicenture retrospective analysis of ITI implant system used for single-tooth replacement: Preliminary results at six or more months of loading. Int J Oral Maxillofac Implants 1997;12:237-42
- Martin WC, Woody RD, Miller BM, Miller AW. Implant abutment screw rotations and preloads for four different screw materials and surfaces. J Prosthet Dent 2001;86:24-32 https://doi.org/10.1067/mpr.2001.116230
- McGlumphy E, Holloway J. Implant screw mechanics. Dental clinic of north America 1998;42:71-89
- Norton MR. Assessment of cold welding properties of internal conical interface two commercially available implant system. J Prosthet Dent 1999;81:159-66 https://doi.org/10.1016/S0022-3913(99)70243-X
- Norton MR. In vitro evaluation of the strength of the conical implant-to-abutment joint in two commercially available implant systems. J Prosthet Dent 2000;83:567-7l https://doi.org/10.1016/S0022-3913(00)70016-3
- Rangert B, Langer B. Bending overload and implant fracture: a retrospective clinical analysis. Int J Oral Maxillofac Implants 1995;10:326-34
- Schwrz MS. Mechanical complications of dental implants. Clinical Oral Implants Res 2000;1:156-8