참고문헌
- M. C. Flemings: Metall. Trans., 'Behavior of metal alloys in the semi-solid state', 22B (1991) 269-293
- R. Mehrabian and M. C. Flemings: Trans. AFS, 'Die casting of partially solidification Al-alloys', 80 (1972) 173-182
- M. Suery and M. C. Flemings: Metall. Trans., 'Effect of strain rate on deformation behavior on semi-solid dendritic alloys', 13A (1982) 1809-1819
- M. Modigell and J. Koke: J. of Mater. Proc. Tech., 'Rheological modelling on semi-solid metal alloys and simulation of thixocasting process', 111 (2001) 53-58 https://doi.org/10.1016/S0924-0136(01)00496-4
- J. Koke and M. Modigell: J. of Non-Newtonian Fluid Mechanics, 'Flow behavior of semi-solid metal alloys', 112 (2003) 141-160 https://doi.org/10.1016/S0377-0257(03)00080-6
- P. Kumar, C. L. Martin, and S. Brown: Proc. 3rd Int. Conf. on 'Semisolid processing of alloys and composites', ' Constitutive modeling and characterization of the flow behavior of semi-solid metal alloy slurries', (1994) 37-46
- M. Perez, J. C. Barbe, Z. Neda, Y. Brechet, and L. Salvo: Acta Mater., 'Computer simulation of the microstructure and rheology of semi-solid alloys under shear', 48 (2000) 3773-3782 https://doi.org/10.1016/S1359-6454(00)00161-0
- D. Brabazon, D. J. Browne, and A. J Carr: Mater. Sci. Eng., 'Ex-perimental investigation of the transient and steady rheological behavior of Al-Si alloys in the mushy state', A356 (2003) 69-80
- A. N. Alexandrou, P. L. Menn, G. Georgiou, and V. Entov: J. Non-Newtonain Fluid Mech., 'Flow insatabilities in Herschel-Bulkley Fluids', 116 (2003) 19-32 https://doi.org/10.1016/S0377-0257(03)00113-7
- C. L. Martin, D. Favier, and M. Suery: Int. J. Plast., 'Visco-plastic behavior of porous metallic materials saturated with liquid part I: Constitutive equations', 13 (1997) 215-235 https://doi.org/10.1016/S0749-6419(97)00009-0
- M. Suery and A. Zavaliangos: Proc. 6th Int. Conf. on 'Semisolid processing of alloys and composites', 'Key problems in rheology of semi-solid alloys', Turin, Italy, (2000) 129-135
- A. Zavaliangos and A. Lawley: J. Mater. Eng. Perform., 'A numerical simulation of thixoforming', 4 (1995) 40-47 https://doi.org/10.1007/BF02682703
- V. Laxmanan, R. N. Smith, and M. E. Glickman: Metall. Trans., 'Deformation of semi-solid Sn-15Pb metal alloy', 11A (1980) 1927-1937
- W. Kurz and D. J. Fisher: 'Fundermantals of solidification', 3th edn., Trans Tech Publications (1989) 45-51
- S. Hiratsuka, E. Niyama, T. Funakubo, and K. Anzai: Trans Jpn. Foundrymen's Soc., 'Effects of mold coating and mold atmosphere on the fluidity of an aluminum alloy', 13 (1994) 18-24
- E. Niyama, K. Anzari, S. Hiratsuka, and T. Funakubo: J. Mater. Proc.Tech., 'Some basic research for thin-wall casting technology', 63 (1997) 779-783 https://doi.org/10.1016/S0924-0136(96)02723-9
- W. M. Mullins and R. F. Sekerka: J. Appl. Phys., 'Morphological stability of a particle growing by diffusion and heat flow', 34 (1963) 323-329 https://doi.org/10.1063/1.1702607
- P. A. Joly and R. Mehrabian: J. of Mat. Sci., 'The rheology of a partially solid ', 11 (1976) 1393-1418 https://doi.org/10.1007/BF00540873
- J. Gurland, Trans. AIME, 'The measurement of grain contiguity in two-phase alloys', 212 (1958) 452-459