참고문헌
- J. R. Davis: ASM Specialty Handbook, 'Aluminum and aluminum alloys', ASM international, Materials Park, OH (1993) 88-94, 579-622
- M. Popovic and E. Romhanji: J. of Mater. Process. Tech. 'Stress corrosion cracking susceptibility of Al-Mg alloy sheet with high Mg content', 125-126 (2000) 275-280
- J. Y. Park, J. C. Kim, H. B. Kim and C. O. Choi: J. of Kor. Foundrymen's Soc., 'Effect of solidification condition on the structure and mechanical properties of AI-5wt%Mg alloy by metallic mold casting', 17 (1997) 237-244
- J. M. Kim, K. D. Seong, J. H. Jun, K. T. Kim and W. J. Jung: J. of Kor. Foundrymen's Soc., 'Variation of fluidity and mechanical properties of AI-Mg alloys with addition of Si, Mn andZn', 24 (2004) 138-144
- E. Niyama, K. Anzai, T. Funakubo and S. Hiratsuka: J. of Mater. Process. Tech., 'Some basic research for thin-wall casting technology', 63 (1997) 779-783 https://doi.org/10.1016/S0924-0136(96)02723-9
- J. M. Kim and C. R. Loper, Jr.: AFS Trans., 'Effect of solidification mechanism on the fluidity of AI-Si casting alloys', 103 (1995) 521-529
- W. S. Lee and B. J. Ye: J. of Kor. Foundrymen's Soc., 'Variation of fluidity in Al alloys with the addition of Si, Mg and melt treatments', 19 (1999) 310-317
- M. C. Flemings: Solidification Processing, MaGraw-Hill (1974) 219-224
- J. Campbell: Castings, Elsevier Science (2003) 74-98
- F. Cardarelli: Materials Handbook, Springer-Verlag, London (2000) 530-537
- J. Campbell: Castings, Elsevier Science (2003) 212-222