DOI QR코드

DOI QR Code

A Study on the Wet Type Ultrasonic Flow-meter System Development

습식방식의 초음파 유량계 시스템 개발에 관한 연구

  • 이응석 (충북대학교 기계공학부) ;
  • 권오훈 (충북대학교 대학원 기계공학부) ;
  • 노명환 (충북대학교 대학원 기계공학부) ;
  • 이형석 (충북대학교 대학원 기계공학부)
  • Published : 2005.12.01

Abstract

This paper suggests fur the study on a fluid velocity measuring system using ultrasonic transducer. In general, the time difference method to measure the distance between transducers has been known. In this paper, the practical technology for manufacturing ultrasonic flow meter system is studied using the time difference method. The ultrasonic transducer was designed and manufactured. The transmission and receiving algorithm for ultrasonic signal was studied. The ultrasonic flow measuring system was experimented in laboratory using a water reservoir for verifying the distance measuring accuracy. Finally, it was tested in flow calibration laboratory for the velocity measuring performance. The system, designed in this study, showed 0.3 mm resolution in distance measurement. For precise flow measurement, a high speed triggering algorithm is required for ultrasonic signal receiving.

Keywords

References

  1. KAIST, 1988, 'Report for Developing of a Ultrasonic Flow Meter,' Report, pp.13-19, 42-54
  2. Central Institute of DaeSung, 1995, 'Technical Development for application of Ultrasonic Flow Meter,' Report
  3. W. H. Hwang et al., 2003, 'Development of Transit Time Different Method Mult-Channel Uktrasonic Gas Flow Meter,' KSPE Autumn Proceeding
  4. Frank Messa, 1965, 'Ultrasonic Transducers for Use in Air,' Proc IEEE, Vol. 53, No. 10 https://doi.org/10.1109/PROC.1965.4252
  5. John Flood, 2001, 'Ultrasonic Flowmeter Basics', sensor magazine, pp. 4-33
  6. Macro Calzolai, Lorezo, 1999, 'A 3-D PW Ultrasonic Doppler Flowmeter : Theory and Experimental Characterization', IEEE Transaction on Ultrasonics, Ferroelelectrics, and Frequency Control, Vol. 46, No. 1 https://doi.org/10.1109/58.741518