참고문헌
- Jacobs, P. F., 1992, Rapid Prototyping & Manufacturing - Fundamentals of StereoLithography, SME, pp. 38-48, 249-284
- Fuh, J. Y. H., Lu, L., Tan, C. C., Chen, Z. X., and Chew, S., 1999, 'Curing characteristics of acrylic photopolymer used in stereolithography process,' Rapid Prototyping Journal, Vol. 5, No. 1, pp. 27-34 https://doi.org/10.1108/13552549910251855
- Lee, E. D., Sim, J. H., Ahn, K. H., and Paik, I. H., 2003, 'Improvement for Recoating Process of Stereolithography System,' Trans. of the Korean Society of Machine Tool Engineers, Vol. 12, No. 1, pp. 16-23
- Karalekas, D. and Rapti, D., 2002, 'Investigation of the processing dependence of SL solidification residual stresses,' Rapid Prototyping Journal, Vol. 8, No. 4, pp. 243-247 https://doi.org/10.1108/13552540210441157
- Liu, X. Y. and Fiang, F., 2003, 'Environmental effects on the dimensions of SL5195 resin,' Rapid Prototyping Journal, Vol. 9, No. 2, pp. 88-94 https://doi.org/10.1108/13552540310698152
- Narahara, H., Tanaka, F., Kishinami, T., Igarashi, S. and Saito, K., 1999, 'Reaction heat effects on initial linear shrinkage and deformation in stereolithography,' Rapid Prototyping Journal, Vol. 5, No. 3, pp. 120-128 https://doi.org/10.1108/13552549910278946
- Dai, K and Shaw, L., 2002, 'Distortion minimization of laser-processed components through control of laser scanning patterns,' Rapid Prototyping Journal, Vol. 8, No. 5, pp. 270-276 https://doi.org/10.1108/13552540210451732
- Bugeda, G., Cervera, M, Lombera, G., and Onate, E., 1995, 'Numerical analysis of stereolithography processes using the finite element method,' Rapid Prototyping Journal, Vol. 1, No. 2, pp. 13-23 https://doi.org/10.1108/13552549510086835
- Huang, Y. M. and Jiang, C. P., 2003, 'Curl Distortion Analysis During Photopolymerisation of Stereolithography Using Dynamic Finite Element Method,' The Int. J. of Adv. Manuf. Technol., Vol. 22, No. 2, pp. 586-595