References
- Ahn, Y. K., Song, J. D. and Yang, B. S., 2003, 'Optimal Design of Engine Mount Using an Artificial Life Algorithm,' Journal of Sound and Vibration, Vol. 261, No. 2, pp. 309-328 https://doi.org/10.1016/S0022-460X(02)00989-6
- Bernuchon, M, 1984, 'A New Generation of Engine Mount,' SAE Techanical Paper #840259
- Brach, R. M. and Haddow, A. G., 1993, 'On the Dynamic Response of Hydraulic Engine Mounts,' SAE Technical paper #931321
- Colgate, J., Chang, T., Chiou, C., Liu, K. and Kerr, M., 1995, 'Modeling of a Hydraulic Engine Mount Focusing on Response to Sinusoidal and Composite Excitations,' Journal of Sound and Vibration, Vol. 184, pp. 503-528 https://doi.org/10.1006/jsvi.1995.0330
- Flower, W. C., 1985, 'Understanding Hydraulic Mounts for Improved Vehicle Noise Vibration and Ride Qualities,' SAE Techanical Paper #850975
- Gau, S. J. and Cotton J. D., 1995, 'Experimental study and Modeling of Hydraulic Mount and Engine System,' SAM Techanical Paper #951348
- Geisberger, A., 2000, 'Hydraulic Engine Mount Modeling, Parameter Identification and Experimental Validation,' Master's thesis, University of Waterloo, Canada
- Geisberger, A., Khajepour, A. and Golnaraghi, F., 2002, 'Nonlinear Modeling of Hydraulic Mounts : Theory and Experiment,' Journal of Sound and Vibration, Vol. 249, No. 2, pp. 371-397 https://doi.org/10.1006/jsvi.2001.3860
- Jazer, G. N. and Golnaraghi, M. F., 2002, 'Nonlinear Modeling, Experimental Verification, and Theoretical Analvsis of a Hydraulic Engine Mount.' Journal of Vibration and Control, Vol. 8, pp. 87-116 https://doi.org/10.1177/1077546302008001519
- Kim, G. and Singh, R., 1995, 'A study of passive and Adaptive Hydraulic Engine Mount Systems with Emphasis on Non-linear Characteristics.' Journal of Sound and Vibration, Vol. 179, pp. 427-453 https://doi.org/10.1006/jsvi.1995.0028
- Lee, K. and Choi, Y., 1995, 'Performance Analysis of Hydraulic Engine Mount by Using Bond Graph Method,' SAE Techanical Paper #951347
- Margolis, D. and Wilson, R., 1997, 'Modeling simulation and Physical Understanding of Hydromounts,' Master's Thesis, University of California
- Milfer, L. R., Ahmadian, M., Nobles, C. M. and Swanson, D. A., 1995, 'Modeling and Performance of an Experimental Active Vibration Isolator.' Trans. ASME Journal of Vibration and Acoustics, Vol. 117, No. 3A, pp. 272-278 https://doi.org/10.1115/1.2874447
- Royston, T. and Singh, R., 1997, 'Study of Nonlinear hydraulic Engine Mounts Focusing on Decoupler Modeling and Design,' SAE Techanical Paper #971936
- Seto, K., Sawatari, K., Nagamatsu, A., Ishihama, M. and Doi, K., 1991, 'Optimum Design Method for Hydraulic Mount,' SAE Techanical Paper #911055
- Singh, R., Kim, G. and Ravindra, P. V., 1992, 'Linear Analysis of Automotive Hydro-Mechanical Mount with Emphasis on Decoupler Characteristics,' Journal of Sound and Vibration, Vol. 158, No. 2, pp. 219-243 https://doi.org/10.1016/0022-460X(92)90047-2
- Suresh, N., Shankar, S. and Bokil, V., 1994, 'Develpoment of Idealistic Hydromount Characteristics to Minimize Engine Induced Vibrations Using Unconstrained Minimization,' SAE Paper #941741
- Swanson, D. A., 1993, 'Active Engine Mounts for Vehicles,' SAE Paper #932432
- Tao, J. S., Liu, G. R. and Lam, K. Y., 2000, 'Design Ontimization of Marine Engine-Mount system,' Journal of Sound and Vibration, Vol. 235, No. 3, pp. 477-494 https://doi.org/10.1006/jsvi.2000.2945
- The Mathworks Inc. Version 2. 1 (Release 12) , Optimization Toolbox for Use with Matlab
- Ushijima, T, Takano, K. and Kojima, H., 1988, 'High Performance Hydraulic Mount for Improving Vehicle Noise and Vibration,' SAE Techanical Paper #880073
- Vahdati, N., 1999, 'Incorporation of TVAs on Soft structures to Improve Vibration Isolation,' Asia-Pacific Vibration Conference '99, Singapore, December 1999
- Yang, B. S. and Song, J. D., 2001, 'Enhanced Artificial Life Algorithm for Fast and Accurate Optimization Search,' Proceedings of Asia-Pacific Vibration Conference, pp. 732-736
- Yu, Y., Peelamedu, S. M., Naganathan, N. G. and Dukkipati, R. V., 2001, 'Automotive Vehicle Engine Mounting Systems: A Survey,' Trans. ASME, J. Dynamic Systems, Measurement, and Control, Vol. 123, pp. 186-194 https://doi.org/10.1115/1.1369361