DOI QR코드

DOI QR Code

Enhanced Superconducting Properties in Melt-processed (Y0.33Sm0.33Nd0.33) Ba2Cu3Oy Oxides in Air

  • Kim, So-Jung (Department of Electrical and Electronic Engineering, Hanzhong University) ;
  • Park, Jong-Kuk (Department of Electrical Engineering, Samcheok National University)
  • 발행 : 2005.12.01

초록

We have systematically studied the superconducting properties and flux pinning enhancement of $(Y_{0.33}Sm_{0.33}Nd_{0.33})\;Ba_2Cu_3O_y$ [(YSN)-123] composite oxides by melt growth process in air. A sample prepared by this method showed well-textured microstructure, and $(Y_{0.33}Sm_{0.33}Nd_{0.33})\;BaCuO_5$ [(YSN)211] nonsuperconducting particles were uniformly dispersed in large (YSN) 123 superconducting matrix. The sample showed a sharp superconducting transition at 91 K. The magnetization measurements of the (YSN)-123 sample exhibited the enhanced flux pinning, compared with $YBa_2Cu_3O_y$ (Y-123) sample without Sm and Nd. Critical current densities of (YSN)-123 sample was $2.5{\times}10^4 A/cm^2$ at 2 T and 77 K.

키워드

참고문헌

  1. S. Jin, T. H. Tiefel, R. C. Sherwood, M. E. Davis, R. B.van Dover, G. W. Kammlott, R. A. Fastnacht, and H. D. Keith, 'High critical current in Y-Ba-Cuo superconductors', Appl. Phys. Lett., Vol. 52, No. 24, p. 2074, 1988
  2. M. Muralidhar, M. Jirsa, N. Sakai, and M. Murakami, 'Progress in melt-processed (Nd-Sm- Gd)$Ba_2Cu_3O_y$ superconductors', Supercond. Sci. Technol., Vol. 16, p. R1. 2003 https://doi.org/10.1088/0953-2048/16/1/201
  3. F. Giovannelli, A. Ubaldini, and I. Monot-Laffez, 'Properties of the$(Sm_{0.33}EU_{0.33}Gd_{0.33})Ba_2Cu_3O_y$ superconductor prepared by different processes in air', Supercond. Sci. Technol., Vol. 16, p. 444, 2003 https://doi.org/10.1088/0953-2048/16/4/304
  4. S. J. Kim, 'Melt textured growth and superconducting properties of $RE^{3+}$ elements doped YBCO superconductors', J. of KIEEME(in Korean) Vol. 16, No.3, p. 231, 2003
  5. M. Murakami, S. I. Yoo, T. Higuchi, N. Sakai, M. Watanabiki, N. Koshizuka, and S. Tanaka, 'A new type of pinning center in melt grown Nd123 and Sm123', Physica C, Vol. 235, p. 2781, 1994
  6. E. M. Gyory, R. B. van Dover, K. A. Jacson, L. F. Schneemeyer, and J. V. Waszczak, 'Anisotropic critical currents in $Ba_2YCU_3O_7$ analyzed using an extended Bean model', Appl. Phys. Lett., Vol. 55, No.3, p. 283, 1989
  7. R. Cloots, T. Koutzarova, J-P. Mathieu, and M. Ausloos, 'From RE-211 to RE-123. How to control the final microstructure of superconducting singledomains', Supercond. Sci. Technol., Vol. 18, p. R9, 2005 https://doi.org/10.1088/0953-2048/18/3/R01
  8. S. J. Kim, K. W. Lee, and H. G. Kim, 'Characterization and superconducting properties of (Sm/Y)-Ba-Cu-O composite oxides by top-seeded melt growth in air', J. Crystal Growth, Vol. 204, p. 78,1999
  9. C. J. Kim, K. B. Kim, H. W. Park, T. H. S, I. H. Kuk, and G. W. Hong, 'Microstructure of melttextured Y-Ba-Cu-O oxides with $CeO_2$ addition and the formation mechanism of the Ba-Cu-O platelet structure', Supercond. Sci. Technol., Vol. 9, p. 76, 1996 https://doi.org/10.1088/0953-2048/9/2/003
  10. S. J. Kim, 'Flux pinning enhancement and irreversibility line of Sm doped YBCO superconductor by zone melt growth process', Trans. EEM, Vol. 5, p. 81, 2004
  11. S. Nariki, N. Sakai, M. Murakami, and I. Hirabayashi, 'High critical current density in Y-BaCu- O bulk superconductors with very fine Y211 particles', Supercond. Sci. Technol., Vol. 17, p. S30, 2004
  12. N. Ihara and T. Matsushita, 'Effect of flux creep on irreversibility lines in superconductors', Physica C, Vol. 257, p. 223, 1996