DOI QR코드

DOI QR Code

Piecewise Regression Model for Solenoid Embedded Inductors Based on the Quasi-newton Method

  • Ko, Young-Don (Department of Electrical and Electronic Engineering, Yonsei University) ;
  • Kim, Kil-Han (Department of Electrical and Electronic Engineering, Yonsei University) ;
  • Yun, Il-Gu (Department of Electrical and Electronic Engineering, Yonsei University) ;
  • Lee, Kyu-Bok (Wireless Communication Research Center, Korea Electronics Technology Institute) ;
  • Kim, Jong-Kyu (Wireless Communication Research Center, Korea Electronics Technology Institute)
  • 발행 : 2005.12.01

초록

This paper presents that the modeling to predict the characteristics with respect to the performance of solenoid embedded inductors manufactured by LTCC process via the nonlinear regression model based on the quasi-Newton method. In order to reduce the runs, the design of experiments (DOE) was used to generate the design space. The nonlinear process models were constructed by the piecewise regression model based on the quasi-Newton method for estimating the model coefficient with the break point on the statistical confidence intervals. Those models were verified by the model accuracy checking based on the assumption statistically.

키워드

참고문헌

  1. S. Lee, J. Choi, May G. S., and I. Yun, 'Investigation of 3-D embedded inductors using monte carlo analysis', IEMT 2002. 27th Annual IEEE/SEMI Int., p. 259, 2002
  2. D. Shin, C. Oh, and I. Yun, 'Circuit modeling of 3D parallel-plate capacitors fabricated by LTCC process', Trans. EEM, Vol. 5, No.1, p. 19, 2004
  3. S. S. Mohan, M. d. M. Hershenson, S. P. Boyd, and T. H. Lee, 'Simple accurate expressions for planar spiral inductances', IEEE J. Solid-State Circuits, Vol. 34, No. 10, p. 1419, 1999
  4. J.-B. Yoon, B.-K. Kim, C.-H. Han, E. Yoon, and c.K. Kim, 'Surface micromachined solenoid on-Si and on-glass inductors for RF applications', IEEE Electron Device Lett., Vol. 20, No.9, p. 487, 1999
  5. Y.-J. Kim and M. G. Allen, 'Surface micro machined solenoid inductors for high frequency applications', IEEE Trans. Comp. Packag. Manufact. Technol.- Part C, Vol. 21, No.1, p. 26, 1998
  6. M. F. Davis, R. J. Pratap, U. Jalan, D.-K. Kim, J. Laskar, and G. S. May, 'Design rule development for electrical modeling of RF multilayer packaging inductors', Electron. Comp. Technol. Conf., p. 1498, 2003
  7. C. C. Kuo, M. Y Kuo, and M. S. Kuo, 'Modeling of capacitors and nonlinear inductors using piecewise curve fitting technique', Comput. Power Electron., IEEE 4th Workshop on, p. 133, 1994
  8. C.-J. Wu, C.-H. Hu, S. -So Yen, C.-C. Yin, C.-C. Chiu, and Y-M. Lee, 'Application of regression models to predict harmonic voltage and current growth trend from measurement data at secondary substations', IEEE Trans. Power Delivery, Vol. 13, No.3, p. 793, 1998
  9. D. M. P. Ng, E. W. M. Wong, K. T. Ko, and K. S. Tang, 'Trend analysis and prediction in multimedia-on-demand systems', ICC, p. 1292, 2001
  10. T. Ishikawa, Y. Tsukui, and M. Matsunami, 'Optimization of electromagnetic devices using artificial neural network with quasi-newton algorithm', IEEE Trans. Magn., Vol. 32, No.3, p. 1226, 1996
  11. S. Lee, J. Choi, G. S. May, and I. Yun, 'Modeling and analysis of 3-D solenoid embedded inductors', IEEE Trans. Electron. Packag. Manufact., Vol. 25, No.1, p. 34, 2002 https://doi.org/10.1109/TEPM.2002.1000481
  12. A. Zolfaghari, A. Chan, and B. Razavi, 'Stacked inductors and transforms in CMOS Technology', IEEE J. Solid-State Circuits, Vol. 36, No.4, p. 620, 2001
  13. C.-J. Chao, S.-C. Wong, C.-H. Kao, M.-J. Chen, L.Y. Leu, and K.- Y. Chiu, , IEEE Trans. Semiconduct. Manufact., Vol. 15, No. 1, p. 19,2002
  14. R. H. Myers and D. C. Montgomery, 'Response surface methodology', New York: Wiley & Sons, 1995
  15. J. Neter, M. H. Kutner, C. J. Nachtshem, and W. Wasserman, 'Applied linear regression models', Irwin, 1996
  16. E. K. P. Chong and S. H. Zak, 'An introduction to optimization', New York: Wiley & Sons, 1996
  17. J.-S. R. Jang, C.-T. Sun, and E. Mizutani, 'Neurofuzzy and soft computing', Prentice Hall. New Jersey, 1997