References
- Regulatory Guide 1.60, 'Design Response Spectra for Seismic design of Nuclear Power plants,' U.S. Atomic Energy Commission, 1973
- Regulatory Guide 1.61, 'Damping Values for Seismic Design of Nuclear Power Plants,' U.S. Atomic Energy Commission, 1973
- Regulatory Guide 1.92, 'Combination of Modes and Spatial Components in Seismic Response Analysis,' U.S. Atomic Energy Commission, 1974
- Regulatory Guide 1.29, 'Seismic Design Classification,' U.S. Nuclear Regulatory Commission, 1978
- Regulatory Guide 1.222, 'Development of Floor Design Response Spectra for Seismic Design of Floor-Supported Equipment or Components,' U.S. Nuclear Regulatory Commission, 1978
- Regulatory Guide 1.100, 'Seismic Qualification of Electric and mechanical Equipment for Nuclear Power Plants,' U.S. Nuclear Regulatory Commission, 1988
- ANSI/IEEE SID 344-1987, 'IEEE Recommended Practice for Seismic Qualification of Class 1E Equipment for Nuclear Power Generating Stations,' The Institute of Electrical and Electronics Engineers Inc, 1987
- The Enforcement Ordinance of Law of Atomic Energy, 1997
- Lee, J. K., Kim, J. Y., Chung, P. J. and Chung, J. H., 'Seismic Qualification of the Air Conditioning Equipment for Nuclear Power Plant,' Journal of KSNVE, Vol. 9, No.3, pp. 535-543, 1999
- Yang, B. S. and Kim, Y. H., 'Seismic Response Analysis of Steam Turbine-Gnerator Rotor System(1st Report, In Case of Rotor-Bearing System only),' Journal of KSNVE, Vol. 9, No.3, pp. 554-564, 1999
- Byeon, H. S. and Lee, J. K., 'Seismic Qualification of the Main Control Board for Nuclear Power Plant,' Journal of KSNVE, Vol. 12, No. 11, pp. 856-863, 2002 https://doi.org/10.5050/KSNVN.2002.12.11.856
- Lee, J. K., Kim, J. Y. and Rhee, H. N., 'Seismic Qualification of the Air Cleaning Units for Nuclear Power Plants Ulchin 5&6,' Transactions of the KSME A, Vol. 26, No.7, pp. 1376-1383, 2002
- Lee, J. H. and Chang, S. H., 'Improvement of Pressurizer PROV System through Micro-Computer and PRA,' Journal of the Korean Nuclear Society, Vol. 17, No.4, pp. 302-317, 1985
- Auh, G. S., Hwang, D. H. and Kim, S. H., 'A Steady-State Margin Comparison between Analog and Digital Protection Systems,' Journal of the Korean Nuclear Society, Vol. 22, No.1, pp. 45-58, 1990
- Mok, J. I. and Seong, P. H., 'Optimal Inspection Periods of Safety System of Wolsung Nuclear Power Plant Unit I with Human Error Consideration,' Journal of the Korean Nuclear Society, Vol. 26, No.1, pp. 9-19, 1994
- Joe, Y. H. and Park, H. G., 'Modal Testing of Seismic Monitoring System Cabinet of Nuclear Power Plant,' Journal of the Korean Society of Civil Engineers, Vol. 19, No.2, pp. 449-457, 1999
- ANSYS, 'User's Manual,' Revision 6.2, ANSYS Inc., 2002