DEVELOPMENT OF VEHICLE DYNAMICS MODEL FOR REAL-TIME ELECTRONIC CONTROL UNIT EVALUATION SYSTEM USING KINEMATIC AND COMPLIANCE TEST DATA

  • KIM S. S. (Graduate School of Automotive Engineering, Kookmin University) ;
  • JUNG H. K. (Hyundai Motor Company) ;
  • SHIM J. S. (Seomoon Technologies, Inc.) ;
  • KIM C. W. (Seomoon Technologies, Inc.)
  • 발행 : 2005.12.01

초록

A functional suspension model is proposed as a kinematic describing function of the suspension, that represents the relative wheel displacement in polynomial form in terms of the vertical displacement of the wheel center and steering rack displacement. The relative velocity and acceleration of the wheel is represented in terms of first and second derivatives of the kinematic describing function. The system equations of motion for the full vehicle dynamic model are systematically derived by using velocity transformation method of multi-body dynamics. The comparison of test and simulation results demonstrates the validity of the proposed functional suspension modeling method. The model is computationally very efficient to achieve real-time simulation on TMS 320C6711 150 MHz DSP board of HILS (hardware-in-the-loop simulation) system for ECU (electronic control unit) evaluation of semi-active suspension.

키워드

참고문헌

  1. Allen, R. W., Rosenthal, T. J. and Szostak, H. T. (1987). Steady state and transient analysis of ground vehicle handling. SAE Paper No. 870495
  2. Choi, B. L., Choi, J. H. and Choi, D. H. (2005). Reliability-based design optimization of an automotive suspension system for enhancing kinematic and compliance characteristics. Int. J. Automotive Technology 6, 3, 235-242
  3. Chun, K. and Sunwoo, M. (2004). Wheel slip control with moving sliding surface for traction control system. Int. J. Automotive Technology 5, 2, 123-133
  4. Coovert, D. A., Chen, H. F. and Guenther, S. A. (1992). Design and operation of new-type suspension parameter measurement device. SAE Paper No. 920048
  5. Kim, S. S. and Jung, H. K. (2002). Functional suspension modeling and vehicle dynamics analysis using K&C test data. Spring Conf. Proc., Korean Society of Automotive Engineers, 855-861, Korea
  6. Kim, S. S. and Jung, H. K. (2004). Functional suspension modeling for real-time vehicle dynamics analysis using K&C test data. 30th FISITA World Automotive Congress, Spain
  7. Kim, S. S. and Vanderploeg, M. J. (1986). A general and efficient method for dynamic analysis of mechanical systems using velocity transformations. ASME J. Mechanisms, Transmissions, and Automation in Design 108,176-182 https://doi.org/10.1115/1.3260799
  8. MSC.ADAMS 2003 User's Manual (2003). MSC. Software
  9. Pacejka, H. B. (2002). Tire and vehicle dynamics. Society Automotive Engineers, 172-215
  10. Sayers, M. W. and Han, D. S. (1996). A generic multibody vehicle model for simulating handling and braking. Supplement to Vehicle System Dynamics, 25, 599-613 https://doi.org/10.1080/00423119608969223