한국해양공학회지 (Journal of Ocean Engineering and Technology)

  • 제19권5호
  • /
  • Pages.65-70
  • /
  • 2005
  • /
  • 1225-0767(pISSN)
  • /
  • 2287-6715(eISSN)
한국해양공학회 (Korean Society of Ocean Engineers)
권호 표지

감육배관의 유한요소해석에 의한 변형 및 강도 평가

Evaluation of Deformation and Strength of Wall Thinne Pipes by Finite Element Analysis

  • 남기우 (부경대학교 신소재공학부) ;
  • 안석환 (부경대학교 기계공학부) ;
  • 이수식 (부경대학교 대학원 재료공학과) ;
  • 김진욱 (한국기계연구원) ;
  • 윤자문 (부경대학교 대학원 재료공학과)
  • NAM KI-WOO (Division of Materials Science and Engineering, Pukyong National University) ;
  • AHN SEOK-HWAN (School of Mechanical Engineering, Pukyong National University) ;
  • LEE SOO-SIG (Graduate School of Materials Science and Engineering, Pukyong National University) ;
  • KIM JIN-WOOK (Korea Institute of Machinery & Materials, Chang Won) ;
  • YOON JA-MUN (Graduate School of Materials Science and Engineering, Pukyong National University)
  • 발행 : 2005.10.01
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

Fracture behavior and pipe strength are very important to the integrity of energy plants, ocean structures, and so forth. The pipes of energy plants and ocean structures are subject to local wall thinning, resulting from severe erosion-corrosion damage. Recently, the effects of local wall thinning on fracture strength and fracture behavior of piping systems have been the focus of many studies. In this paper, the elasto-plastic analysis is performed by FE code ANSYS on straight pipes with wall thinning. We evaluated the failure mode, fracture strength and fracture behavior, using FE analysis. Also, the effect of the axial strain on deformations and failure modes was estimated by FE analysis.

키워드

참고문헌

  1. 안석환, 남기우, 김선진, 김진환, 김현수, 박인덕 (2002). '감육배관의 손상모드에 따른 음향방출 특성', 한국해양공학회지, 제16권, 제5호, pp 66-72
  2. 안석환, 남기우, 김선진, 김진환, 김현수, 도재윤 (2003). '감육배관의 굽힘하중에 의한 손상모드와 파괴거동 평가', 대한기계학회논문집, 제27권, 제1호, pp 8-17
  3. Ahn, S.H., Ando, K, Ishiwata, M. and Hasegawa, K. (1998). 'Plastic Collapse behavior of Pipes with Local Wall Thinning Subjected to Bending Load Allowable Limit ' , JHPI, Vol 36, No 4, pp 22.5-234
  4. Ahn, S.H., Nam, K.W., Yoo, Y.S., Ando, K, Ji, S.H., Ishiwata, M. and Hasegawa, K. (2002). 'Fracture Behavior of Straight Pipe and Elbow with Local Wall Thinning ', Nuclear Engineering and Design 211, pp 91-103 https://doi.org/10.1016/S0029-5493(01)00447-2
  5. ASME Boiler and Pressure Vessel Code Section Ill. (1992)
  6. ASME Boiler and Pressure Vessel Code Section XI. (1998)
  7. Deardorff, AF. and Bush, S.H (1990). 'Development of ASME Section Criteria for Erosion-Corrosion Thinning of Carbon Steel Piping', ASME PVP, PVP-Vol-18, NDE-Vol 7, pp 71-75
  8. Mathonet, J.F., Cherasse, J.M., Leblois, C.L. and Guyette, M.A. (1995). 'Belgian Methodology for Evaluation of Frosion Corrosion Phenomena in Unit 1; 2; 3 & 4 of the DOEL Nuclear Power Plant(NPP)', ASME PVP, PVP-Vol-303, pp 393-399
  9. Miyazaki, K., Kanno, S., lshiwata, M., Hasegawa, K., Ahn, S.H. and Ando, K. (1999). 'Fracture Behavior of Carbon Steel Pipe with Local Wall Thinning Subjected to Bending Load', Nuclear Engineering and Design 191, pp 195-204 https://doi.org/10.1016/S0029-5493(99)00141-7
  10. Virginia Electric and Power Co. (1987). Surry Unit 2 Reactor Trip and Feedwater Pipe Failure Report