한국유체기계학회 논문집 (The KSFM Journal of Fluid Machinery)

한국유체기계학회 (Korean Society for Fluid machinery)
권호 표지
DOI QR코드

DOI QR Code

평균 양방향 튜브의 설계 최적화를 위한 FLUENT 코드해석

FLUENT Code Analyses for Design Optimization of an Average Bi-directional Flow Tube

  • 강경호 (한국원자력연구소 열수력 안전 연구부) ;
  • 윤병조 (한국원자력연구소 열수력 안전 연구부) ;
  • 어동진 (한국원자력연구소 열수력 안전 연구부) ;
  • 백원필 (한국원자력연구소 열수력 안전 연구부)
  • 발행 : 2005.08.01
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

Average Bi-directional flow tube was suggested to measure single and two phase flow rate. Its working principle is similar with Pilot tube, however, it makes it possible to eliminate the cooling system which is normally needed to prevent from flashing in the pressure impulse line of Pilot tube when it is used in the depressurization condition. 3-dimensional steady state flow analyses using FLUENT 5.4 code were performed to validate the application of the average bi-directional flow tube in case of water and air flow. In this study, sensitivity studies have been performed to optimize the design features of the average bi-directional flow tube which can be applied for the various experimental conditions. For Re numbers above 1000, the k values are nearly constant regardless of the Re numbers and flow types and calculation results and experimental data coincides quite well. The current FLUENT calculation results suggest that linearity of the k values in various design features of the average BDFT is highly promising, which means that it is quite reasonable to select the typical design of the average BDFT for the convenience of the experimental conditions.

키워드

참고문헌

  1. G.. Heskestad, 1974, Bidirectional Flow Tube for Fire Induced Vent Flows, Appendix K in Croce, P.A., and Emmons H.W, The Large-Scale Bed Room Fire Tests, July 11, 1973 , Factory Mutual Research, FMRC S/N 210114.4
  2. B. J. Mccaffrey, G. Heskestad, 1976, A Robust Bidirectional Low-Velocity Probe for Flame and Fire Application, Combustion and Flame, Volume 26, pp. 125-127 https://doi.org/10.1016/0010-2180(76)90062-6
  3. C. Y. Liu et aI., 1990, Note on the Robust Bidirectional Low Velocity Probe, Experiments in Fluids, Volume 9, pp. 356-354
  4. K. H. Kang, B. J. Yun and W. P. Baik, Flow Analyses using FLUENT 5.4 Code for the Bidirectional Flow Tube, KSME '03 Autumm Meeting Korea, 2003
  5. B. J. Yun et aI., A New Method for the Measurement of Two-phase Mass Flow Rate using Average Bi-directional Flow Tube, KSME '04 Spring Meeting Korea, 2004
  6. F. M. White, 1986, Fluid Mechanics, McGraw-Hill Book Company, Singapore