The Transactions of the Korean Institute of Electrical Engineers B (대한전기학회논문지:전기기기및에너지변환시스템부문B)

The Korean Institute of Electrical Engineers (대한전기학회)
권호 표지

Design and Characteristics Analysis of Switched Reluctance Motor for Electric Power Pallet Vehicle

전동지게차용 스위치드 릴럭턴스 전동기 설계 및 특성해석

  • 오주환 (한양대학교 에너지변환시스템연구실) ;
  • 이병석 ((주)두산인프라코어) ;
  • 이춘택 ((주)두산인프라코어) ;
  • 정우용 ((주)두산인프라코어) ;
  • 권병일 (하냥대학교 전자컴퓨터공학부)
  • Published : 2005.11.01
Download PDF
⟨ Previous Next ⟩

Abstract

This paper presents the design and drive characteristics of a switched reluctance motor for an electric power pallet vehicle. The designed switched reluctance motor is redesigned by using the finite element analysis(FEA) as a variation of the pole-arc angle for the purpose of an electric power pallet vehicle performance. The output power and torque characteristics of a switched reluctance motor are variable by switching angles of the commutator. Therefor this paper is studied about relationship between the output power and torque characteristics of a switched reluctance motor according to switching angles. The output power of the characteristic point of an electric power pallet vehicle has been shown by experiment. The designed motor drive system operates with the low voltage and high current with using the battery. The core and frame temperatures were described. In this paper, the designed motor is shown better drive characteristics than the DC motor from the rated to maximum, which is verified by the finite element analysis and experimental results.

Keywords

References

  1. Materu P.N., Krishnan R, 'Steady-State Analysis of The Variable Speed Switched Reluctance Motor Drive', IEEE Trans., Vol. 36, No.4, pp. 523-529, 1989 https://doi.org/10.1109/41.43012
  2. John M. Miller, Propulsion Systems for Hybrid Vehides, lEE Power and Energy Series 45, 2004
  3. Mehrdad Ehsani, Yimin Gao, Sebastien E. Gay, Ali Emadi, Modem Electric, Hybrid Electric, Fuel Cell Vehicles: Fundamentals, Theory, and Design, CRC Press LLC, 2005
  4. TJE Miller, 'Switched Reluctance Motors and their Control', Magna Physis Publishing and Clarendon Press, 1993
  5. Shuanghong Wang, qionghua Zhan, Zhiyuan Ma, Libing Zhoum 'Implementation of A 50kW Four Phase Switched Reluctance Motor Drive System for Hybrid Electric Vehicle', IEEE Trans., Vol. 41, No. 1, pp. 501-505, 2005 https://doi.org/10.1109/TMAG.2004.838985
  6. Feng Chieh Lin, Sheng 'Ming Yang, 'Instantaneous Shaft Radial Force Control with Sinusoidal Excitations for Switched Reluctance Motors', IEEE lAS., Vol. 1, No.1, pp. 424-430, 2004 https://doi.org/10.1109/IAS.2004.1348442
  7. Barrie C. Mecrow, Eyhab A, El-kharashi, John W. Finch, Alan G. Jack, 'Preliminary Performance Evaluation of Switched Reluctance Motors with Segmental Rotors', IEEE Trans., Vol. 19, No.4, pp. 679-686, 2004 https://doi.org/10.1109/TEC.2004.837290
  8. Iqbal Husain, M. Ehsani, 'Torque Ripple minimization in Switched Reluctance Motor Drives by PWM Current Control', IEEE Trans., Vol. 11, No. 1, pp. 91-98, 1996 https://doi.org/10.1109/63.484420
  9. 김창섭, 오석규, 안진우, '하이브리드 여자방식을 이용한 SRM의 진동소음 저감특성', 전기학회 논문지, 제50B권 제9호, pp. 438-444, 2001
  10. Funda Sahin, H. Bulent Ertan, Kemal Leblebicioglu, 'Optimum Geometry for Torque Ripple Minimization of Switched Reluctance Motors', IEEE Trans., Vol. 15, No.1, 2000 https://doi.org/10.1109/60.849113