References
- Arai, M., Shimizu, M. and Hiroyasu, H., 1991, 'Similarity between the Break-up Lengths of a High Speed Liquid Jet in Atmospheric and Pressurized Conditions,' In ICLASS-91, Gaithersburg, Maryland
- Arregle, J., Pastor, J. V. and Ruiz, S., 1999, 'The Influence of Injection Parameters on Diesel Spray Characteristics,' SAE Paper 1999-01-0200
- Bosch, W., 1966, 'The Fuel Rate Indicator: A New Measuring Instrument for Display of the Characteristics of Individual Injection,' SAE Paper 660749
- Cheong, S. -K., Liu, J., Shu, D., Wang, J. and Powell, C. F., 2004, 'Effects of Ambient Pressure on Dynamics of Near- Nozzle Diesel Sprays Studied by Ultrafast X-Radiography,' SAE Paper 2004-01-2026
- Dent, J. C., 1971, 'A Basis for the Comparison of Various Experimental Methods for Studying Spray Penetration,' SAE Paper 710571
- Desantes, J. M., Payri, R, Salvador, F. J. abd Gimeno, J., 2003, 'Measurements of Spray Momentum for the Study of Cavitation in Diesel Injection Nozzles,' SAE Paper 2003-01-0703
- Desantes, J. M., Payri, R., Pastor, J. M. and Gimeno, J., 2005, 'Experimental Analysis of Fuel Evaporation in Diesel Sprays. Part I. Nozzle characterization,' Atomization and Sprays, Vol. 15, pp. 489-516 https://doi.org/10.1615/AtomizSpr.v15.i5.20
- Hay, N. and Jones, P. L., 1972, 'Comparison of the Various Correlations for Spray Penetration,' SAE Paper 720776
- Hiroyasu, H. and Arai, M., 1990, 'Structures of Fuel Sprays in Diesel Engines,' SAE Paper 900475
-
Hurly, J. J., Defibaugh, D. R. and Moldover, M. R., 2000, 'Thermodynamic Properties of
$SF_6$ ,' Int. J. Thermophysics 2000, 21, pp. 739-765 https://doi.org/10.1023/A:1006697620523 - Kim, C. H. and Lee, J. S., 2003, 'An Analytical Study on the Performance Analysis of a Unit-Injector System of a Diesel Engine,' KSME International Journal, Vol. 17, No.1, pp. 146-156
- Koo, J. Y., 2003, 'The Effects of Injector Nozzle Geometry and Operating Pressure Conditions on the Transient Fuel Spray Behavior,' KSME International Journal, Vol. 17, No. 3, pp. 617-625
- Macian, V., Payri, R., Margot, X. and Salvador, F. J., 2003a, 'A CFD Analysis of the Influence of Diesel Nozzle Geometry on the inception of Cavitation,' Atom Sprays 2003, 13, pp. 579-604 https://doi.org/10.1615/AtomizSpr.v13.i56.80
- Macian, V., Bermudez, V., Payri, R. and Gimeno, J., 2003b, 'New Technique for the Determination of the Internal Geometry of Diesel Nozzle with the use of the Silicone Methodology,' Exp. Tech 2003, 27 (2), pp. 39-43 https://doi.org/10.1111/j.1747-1567.2003.tb00107.x
- MacPhee, A. G., Tate, M. W., Powell, C. F., Yue, Y., Renzi, M. J. et al., 2002, 'X-ray Imaging of Shock Waves Generated by High-pressure Fuel Sprays,' Science, Vol. 295, pp. 1261-1263 https://doi.org/10.1126/science.1068149
- Naber, J. and Siebers, D.L., 1996, 'Effects of gas density and vaporisation on penetration and dispersion of Diesel sprays,' SAE Paper 960034
- Pastor, J. V, Payri, R., Lopez, J. J. and Julia, J. E., 2003, 'Effect of Injector Nozzle Geometry of Diesel Engines on the Macroscopic Spray Characteristics by Means of Optical Techniques,' Fuel Injection Systems. ImechE Conference Transactions. C610/014/2003, pp. 73-82
- Pastor, J. V., Arregle, J. and Palomares, A., 2001, 'Diesel Spray Image Segmentation with a Likelihood Ratio Test,' Applied Optics, Vol. 40, No. 17, pp. 2876-2885 https://doi.org/10.1364/AO.40.002876
- Payri, F., Desantes, J. M. and Arregle, J., 1996, 'Characterization of D.l. Diesel Sprays in High Density Conditions,' SAE Paper 960774
- Payri, F., Bermudez, V., Payri, R. and Salvador, F. J., 2004, 'The Influence of Cavitation on the Internal Flow and the Spray Characteristics in Diesel Injection Nozzles,' Fuel 2004, 83, 419-31 https://doi.org/10.1016/j.fuel.2003.09.010
- Payri, R., Margot, X. and Salvador, F. J., 2002, 'A Numerical Study of the Influence of Diesel Nozzle Geometry on the Inner Cavitating Flow,' SAE Paper 2002-01-215
- Payri, R., Molina, S., Salvador, F. J. and Gimeno, J., 2004a, 'A Study of the Relation between Nozzle Geometry, Internal Flow and Sprays Characteristics in Diesel Fuel Injection Systems,' KSME International Journal, Vol. 18, No.7, pp. 1222-1235
- Payri, R., Guardiola, C., Salvador, F. J. and Gimeno, J., 2004b, 'Critical Cavitation Number Determination in Diesel Injection Nozzles,' Experimental Techniques, Vol. 28, No. 3, pp. 49-51 https://doi.org/10.1111/j.1747-1567.2004.tb00164.x
- Payri, R., Climent, H., Salvador, F.J., Favennec, A. G., 2004c, 'Diesel Injection System Modelling. Methodology and Application for a First-generation Common Rail System,' Proc. Instn. Mech. Engrs., Vol. 218, Part D : Automobile Engineering, pp. 81-91 https://doi.org/10.1243/095440704322829191
- Payri, R., Garcia, J.M., Salvador, F.J., Gimeno, J., 2005, 'Using Spray Momentum Flux Measurements to Understand the Influence of Diesel Nozzle Geometry on Spray Characteristics,' Fuel 2005, 84, pp. 551-561 https://doi.org/10.1016/j.fuel.2004.10.009
- Wakuri, Y., Fujii, M., Amitani, T. and Tsuneya, R., 1960, 'Studies of the Penetration of a Fuel Spray in a Diesel Engine,' Bull. J.S.M.E., 3(9), pp. 123-130 https://doi.org/10.1299/jsme1958.3.123